Skip to contentSkip to conversation

mlxbf_gige: remove driver-managed interrupt counts

PATCH Applied David Thompson 2 participants 2 messages May 11, 2022 – May 12, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 mlxbf_gige: remove driver-managed interrupt counts

The driver currently has three interrupt counters, which are incremented every time each interrupt handler executes. These driver-managed counters are not necessary as the kernel already has logic that manages interrupt counts and exposes them via /proc/interrupts. This patch removes the driver-managed counters.

---
 drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h    | 3 ---
 .../ethernet/mellanox/mlxbf_gige/mlxbf_gige_ethtool.c    | 8 +++-----
 .../net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_intr.c   | 9 ---------
 3 files changed, 3 insertions(+), 17 deletions(-)
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h +0 -3
index 86826a70f9dd..5fdf9b7179f5 100644
@@ -90,9 +90,6 @@ struct mlxbf_gige {
 	dma_addr_t rx_cqe_base_dma;
 	u16 tx_pi;
 	u16 prev_tx_ci;
-	u64 error_intr_count;
-	u64 rx_intr_count;
-	u64 llu_plu_intr_count;
 	struct sk_buff *rx_skb[MLXBF_GIGE_MAX_RXQ_SZ];
 	struct sk_buff *tx_skb[MLXBF_GIGE_MAX_TXQ_SZ];
 	int error_irq;
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_ethtool.c +3 -5
index ceeb7f4c3f6c..41ebef25a930 100644
@@ -24,11 +24,9 @@ static void mlxbf_gige_get_regs(struct net_device *netdev,
 	regs->version = MLXBF_GIGE_REGS_VERSION;
 
 	/* Read entire MMIO register space and store results
-	 * into the provided buffer. Each 64-bit word is converted
-	 * to big-endian to make the output more readable.
-	 *
-	 * NOTE: by design, a read to an offset without an existing
-	 *       register will be acknowledged and return zero.
+	 * into the provided buffer. By design, a read to an
+	 * offset without an existing register will be
+	 * acknowledged and return zero.
 	 */
 	memcpy_fromio(p, priv->base, MLXBF_GIGE_MMIO_REG_SZ);
 }
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_intr.c +0 -9
index c38795be04a2..5b3519f0cc46 100644
@@ -17,8 +17,6 @@ static irqreturn_t mlxbf_gige_error_intr(int irq, void *dev_id)
 
 	priv = dev_id;
 
-	priv->error_intr_count++;
-
 	int_status = readq(priv->base + MLXBF_GIGE_INT_STATUS);
 
 	if (int_status & MLXBF_GIGE_INT_STATUS_HW_ACCESS_ERROR)
@@ -75,8 +73,6 @@ static irqreturn_t mlxbf_gige_rx_intr(int irq, void *dev_id)
 
 	priv = dev_id;
 
-	priv->rx_intr_count++;
-
 	/* NOTE: GigE silicon automatically disables "packet rx" interrupt by
 	 *       setting MLXBF_GIGE_INT_MASK bit0 upon triggering the interrupt
 	 *       to the ARM cores.  Software needs to re-enable "packet rx"
@@ -90,11 +86,6 @@ static irqreturn_t mlxbf_gige_rx_intr(int irq, void *dev_id)
 
 static irqreturn_t mlxbf_gige_llu_plu_intr(int irq, void *dev_id)
 {
-	struct mlxbf_gige *priv;
-
-	priv = dev_id;
-	priv->llu_plu_intr_count++;
-
 	return IRQ_HANDLED;
 }
 
Signature · 1 line
2.30.1
#1 lore raw
This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:

Quoted 8 lines · On Wed, 11 May 2022 09:52:51 -0400 you wrote:

The driver currently has three interrupt counters, which are incremented every time each interrupt handler executes. These driver-managed counters are not necessary as the kernel already has logic that manages interrupt counts and exposes them via /proc/interrupts. This patch removes the driver-managed counters.

[...]

Here is the summary with links:
- [net-next,v2] mlxbf_gige: remove driver-managed interrupt counts

    https://git.kernel.org/netdev/net-next/c/f4826443f4d6

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html