OPE support on Tegra210 and later
Subsystems (4)
v2 cover OPE support on Tegra210 and later
This series adds support for Output Prcoessing Module (OPE) module on Tegra210 and later generations of SoCs. OPE is a client of AHUB and it has sub blocks of PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor) for data processing.
An ASoC component is registered for OPE, which includes PEQ and MBDRC functions as well. This can be plugged in audio path using ALSA mixer controls. The series adds necessary binding documentaion, driver and DT binding patches to enable OPE module on Jetson platforms.
Changelog
=========
v1 -> v2:
---------
* Use generic node names for OPE, PEQ and MBDRC devices. Update binding doc and DT patches for this.
* Remove redundant nodename rule enforcement from OPE, PEQ and MBDRC nodes. Update binding doc patch for this.
* Fix spaces before binding doc examples and remove '|' from binding doc descriptions.
Sameer Pujar (6):
ASoC: tegra: Add binding doc for OPE module
ASoC: tegra: Add Tegra210 based OPE driver
ASoC: tegra: AHUB routes for OPE module
arm64: defconfig: Build Tegra OPE module
arm64: tegra: Add OPE device on Tegra210 and later
arm64: tegra: Enable OPE on various platforms
.../bindings/sound/nvidia,tegra210-ahub.yaml | 4 + .../bindings/sound/nvidia,tegra210-mbdrc.yaml | 47 + .../bindings/sound/nvidia,tegra210-ope.yaml | 87 ++ .../bindings/sound/nvidia,tegra210-peq.yaml | 48 + arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 43 + arch/arm64/boot/dts/nvidia/tegra186.dtsi | 23 + arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 43 + .../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 43 + arch/arm64/boot/dts/nvidia/tegra194.dtsi | 23 + arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 84 ++ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 84 ++ arch/arm64/boot/dts/nvidia/tegra210.dtsi | 40 + .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 43 + arch/arm64/boot/dts/nvidia/tegra234.dtsi | 23 + arch/arm64/configs/defconfig | 1 + sound/soc/tegra/Kconfig | 9 + sound/soc/tegra/Makefile | 2 + sound/soc/tegra/tegra210_ahub.c | 39 +- sound/soc/tegra/tegra210_mbdrc.c | 1012 ++++++++++++++++++++ sound/soc/tegra/tegra210_mbdrc.h | 215 +++++ sound/soc/tegra/tegra210_ope.c | 419 ++++++++ sound/soc/tegra/tegra210_ope.h | 90 ++ sound/soc/tegra/tegra210_peq.c | 434 +++++++++ sound/soc/tegra/tegra210_peq.h | 56 ++ 24 files changed, 2908 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml create mode 100644 sound/soc/tegra/tegra210_mbdrc.c create mode 100644 sound/soc/tegra/tegra210_mbdrc.h create mode 100644 sound/soc/tegra/tegra210_ope.c create mode 100644 sound/soc/tegra/tegra210_ope.h create mode 100644 sound/soc/tegra/tegra210_peq.c create mode 100644 sound/soc/tegra/tegra210_peq.h
Signature · 1 line
2.7.4
PATCH v2 1/6 ASoC: tegra: Add binding doc for OPE module
This patch adds YAML schema for DT bindings of Output Processing Engine (OPE) module. It consists of Parametric Equalizer (PEQ) and Multi Band Dynamic Range Compressor (MBDRC) sub blocks and binding doc for these blocks are added as well. The OPE will be registered as an ASoC component and can be plugged into an audio path as per need via ALSA mixer controls. The DT bindings are applicable on Tegra210 and later SoCs where OPE module is present.
--- .../bindings/sound/nvidia,tegra210-ahub.yaml | 4 + .../bindings/sound/nvidia,tegra210-mbdrc.yaml | 47 ++++++++++++ .../bindings/sound/nvidia,tegra210-ope.yaml | 87 ++++++++++++++++++++++ .../bindings/sound/nvidia,tegra210-peq.yaml | 48 ++++++++++++ 4 files changed, 186 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +4 -0
@@ -110,6 +110,10 @@ patternProperties: type: object $ref: nvidia,tegra186-asrc.yaml# + '^processing-engine@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-ope.yaml# + required: - compatible - reg
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file +47 -0
47 lines not on this page · raw message
Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml new file +87 -0
87 lines not on this page · raw message
Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml new file +48 -0
48 lines not on this page · raw message
Signature · 1 line
2.7.4
Re: [PATCH v2 1/6] ASoC: tegra: Add binding doc for OPE module
Quoted 40 lines · Sameer Pujar
This patch adds YAML schema for DT bindings of Output Processing Engine (OPE) module. It consists of Parametric Equalizer (PEQ) and Multi Band Dynamic Range Compressor (MBDRC) sub blocks and binding doc for these blocks are added as well. The OPE will be registered as an ASoC component and can be plugged into an audio path as per need via ALSA mixer controls. The DT bindings are applicable on Tegra210 and later SoCs where OPE module is present.
Signed-off-by Sameer Pujar <[email protected]>--- .../bindings/sound/nvidia,tegra210-ahub.yaml | 4 + .../bindings/sound/nvidia,tegra210-mbdrc.yaml | 47 ++++++++++++ .../bindings/sound/nvidia,tegra210-ope.yaml | 87 ++++++++++++++++++++++ .../bindings/sound/nvidia,tegra210-peq.yaml | 48 ++++++++++++ 4 files changed, 186 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yamlDocumentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +4
-0@@ -110,6 +110,10 @@ patternProperties: type: object $ref: nvidia,tegra186-asrc.yaml# + '^processing-engine@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-ope.yaml# + required: - compatible - regDocumentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file +0
-0
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml line 7
Quoted 7 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file +7
-0@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mbdrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 MBDRC Device Tree Bindings
Previous comments - s/Device Tree Bindings//
- still applies. Please do not ignore it.
Quoted 46 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file +40
-0+ +description: + The Multi Band Dynamic Range Compressor (MBDRC) is part of Output + Processing Engine (OPE) which interfaces with Audio Hub (AHUB) via + Audio Client Interface (ACIF). MBDRC can be used as a traditional + single full band or a dual band or a multi band dynamic processor. + +maintainers: + - Jon Hunter <[email protected]> + - Mohan Kumar <[email protected]> + - Sameer Pujar <[email protected]> + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-mbdrc + - items: + - enum: + - nvidia,tegra234-mbdrc + - nvidia,tegra194-mbdrc + - nvidia,tegra186-mbdrc + - const: nvidia,tegra210-mbdrc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dynamic-range-compressor@702d8200 { + compatible = "nvidia,tegra210-mbdrc"; + reg = <0x702d8200 0x200>; + }; + +...Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml new file +0
-0
Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml line 7
Quoted 7 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml new file +7
-0@@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ope.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 OPE Device Tree Bindings
Ditto.
Quoted 86 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml new file +80
-0+ +description: + The Output Processing Engine (OPE) is one of the AHUB client. It has + PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor) + sub blocks for data processing. + +maintainers: + - Jon Hunter <[email protected]> + - Mohan Kumar <[email protected]> + - Sameer Pujar <[email protected]> + +allOf: + - $ref: name-prefix.yaml# + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-ope + - items: + - enum: + - nvidia,tegra234-ope + - nvidia,tegra194-ope + - nvidia,tegra186-ope + - const: nvidia,tegra210-ope + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + sound-name-prefix: + pattern: "^OPE[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: + OPE ACIF (Audio Client Interface) input port. This is connected + to corresponding ACIF output port on AHUB (Audio Hub). + + port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: + OPE ACIF output port. This is connected to corresponding ACIF + input port on AHUB. + +patternProperties: + '^equalizer@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-peq.yaml# + + '^dynamic-range-compressor@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-mbdrc.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + processing-engine@702d8000 { + compatible = "nvidia,tegra210-ope"; + reg = <0x702d8000 0x100>; + sound-name-prefix = "OPE1"; + }; + +...Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml new file +0
-0
Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml line 7
Quoted 7 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml new file +7
-0@@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-peq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 PEQ Device Tree Bindings
Ditto
Quoted 31 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml new file +31
-0+ +description: + The Parametric Equalizer (PEQ) is a cascade of biquad filters with + each filter tuned based on certain parameters. It can be used to + equalize the irregularities in the speaker frequency response. + PEQ sits inside Output Processing Engine (OPE) which interfaces + with Audio Hub (AHUB) via Audio Client Interface (ACIF). + +maintainers: + - Jon Hunter <[email protected]> + - Mohan Kumar <[email protected]> + - Sameer Pujar <[email protected]> + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-peq + - items: + - enum: + - nvidia,tegra234-peq + - nvidia,tegra194-peq + - nvidia,tegra186-peq + - const: nvidia,tegra210-peq + + reg: + maxItems: 1 + +required: + - compatible + - reg +
Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml line 48
Quoted 10 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml new file +10
-0+additionalProperties: false + +examples: + - | + equalizer@702d8100 { + compatible = "nvidia,tegra210-peq"; + reg = <0x702d8100 0x100>; + }; + +...
Best regards,
Krzysztof
Re: [PATCH v2 1/6] ASoC: tegra: Add binding doc for OPE module
Quoted 42 lines · Krzysztof Kozlowski
Quoted 41 lines · Sameer Pujar
This patch adds YAML schema for DT bindings of Output Processing Engine (OPE) module. It consists of Parametric Equalizer (PEQ) and Multi Band Dynamic Range Compressor (MBDRC) sub blocks and binding doc for these blocks are added as well. The OPE will be registered as an ASoC component and can be plugged into an audio path as per need via ALSA mixer controls. The DT bindings are applicable on Tegra210 and later SoCs where OPE module is present.
Signed-off-by Sameer Pujar <[email protected]>--- .../bindings/sound/nvidia,tegra210-ahub.yaml | 4 + .../bindings/sound/nvidia,tegra210-mbdrc.yaml | 47 ++++++++++++ .../bindings/sound/nvidia,tegra210-ope.yaml | 87 ++++++++++++++++++++++ .../bindings/sound/nvidia,tegra210-peq.yaml | 48 ++++++++++++ 4 files changed, 186 insertions(+)create mode 100644
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yamlcreate mode 100644Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yamlcreate mode 100644Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yamlDocumentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +4
-0@@ -110,6 +110,10 @@ patternProperties: type: object $ref: nvidia,tegra186-asrc.yaml# + '^processing-engine@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-ope.yaml# + required: - compatible - regDocumentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file +1
-0@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
Quoted 8 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml line 7
Quoted 6 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file +6
-0+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mbdrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 MBDRC Device Tree BindingsPrevious comments - s/Device Tree Bindings//
- still applies. Please do not ignore it.
I did not ignore this. There was a comment from Mark on this earlier (v1) and I did not see further reply from you. I thought you were OK with the way it is. So if you are saying acronym part is OK and just to remove "Device Tree Bindings" I can send a v3 for this.
Re: [PATCH v2 1/6] ASoC: tegra: Add binding doc for OPE module
Quoted 13 lines · Sameer Pujar
Quoted 4 lines
Quoted 4 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file +1
-0@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)Quoted 8 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml line 7
Quoted 6 lines
Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file +6
-0+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mbdrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 MBDRC Device Tree BindingsPrevious comments - s/Device Tree Bindings//
- still applies. Please do not ignore it.
Quoted 1 line
I did not ignore this. There was a comment from Mark on this earlier (v1) and I did not see further reply from you. I thought you were OK with the way it is. So if you are saying acronym part is OK and just to remove "Device Tree Bindings" I can send a v3 for this.
Yes, acronym is okay. Just remove the "Device Tree Bindings".
Best regards,
Krzysztof
PATCH v2 2/6 ASoC: tegra: Add Tegra210 based OPE driver
In reply to Sameer PujarThe Output Processing Engine (OPE) is one of the AHUB client. It has PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor) sub blocks for data processing. The PEQ block gets samples from the MBDRC block.
This patch registers OPE driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes OPE interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver.
--- sound/soc/tegra/Kconfig | 9 + sound/soc/tegra/Makefile | 2 + sound/soc/tegra/tegra210_mbdrc.c | 1012 ++++++++++++++++++++++++++++++++++++++ sound/soc/tegra/tegra210_mbdrc.h | 215 ++++++++ sound/soc/tegra/tegra210_ope.c | 419 ++++++++++++++++ sound/soc/tegra/tegra210_ope.h | 90 ++++ sound/soc/tegra/tegra210_peq.c | 434 ++++++++++++++++ sound/soc/tegra/tegra210_peq.h | 56 +++ 8 files changed, 2237 insertions(+) create mode 100644 sound/soc/tegra/tegra210_mbdrc.c create mode 100644 sound/soc/tegra/tegra210_mbdrc.h create mode 100644 sound/soc/tegra/tegra210_ope.c create mode 100644 sound/soc/tegra/tegra210_ope.h create mode 100644 sound/soc/tegra/tegra210_peq.c create mode 100644 sound/soc/tegra/tegra210_peq.h
sound/soc/tegra/Kconfig +9 -0
@@ -85,6 +85,15 @@ config SND_SOC_TEGRA210_I2S compatible devices. Say Y or M if you want to add support for Tegra210 I2S module. +config SND_SOC_TEGRA210_OPE + tristate "Tegra210 OPE module" + help + Config to enable the Output Processing Engine (OPE) which includes + Parametric Equalizer (PEQ) and Multi Band Dynamic Range Compressor + (MBDRC) sub blocks for data processing. It can support up to 8 + channels. + Say Y or M if you want to add support for Tegra210 OPE module. + config SND_SOC_TEGRA186_ASRC tristate "Tegra186 ASRC module" help
sound/soc/tegra/Makefile +2 -0
@@ -19,6 +19,7 @@ snd-soc-tegra210-sfc-objs := tegra210_sfc.o snd-soc-tegra210-amx-objs := tegra210_amx.o snd-soc-tegra210-adx-objs := tegra210_adx.o snd-soc-tegra210-mixer-objs := tegra210_mixer.o +snd-soc-tegra210-ope-objs := tegra210_ope.o tegra210_mbdrc.o tegra210_peq.o obj-$(CONFIG_SND_SOC_TEGRA) += snd-soc-tegra-pcm.o obj-$(CONFIG_SND_SOC_TEGRA20_AC97) += snd-soc-tegra20-ac97.o
@@ -38,6 +39,7 @@ obj-$(CONFIG_SND_SOC_TEGRA210_SFC) += snd-soc-tegra210-sfc.o obj-$(CONFIG_SND_SOC_TEGRA210_AMX) += snd-soc-tegra210-amx.o obj-$(CONFIG_SND_SOC_TEGRA210_ADX) += snd-soc-tegra210-adx.o obj-$(CONFIG_SND_SOC_TEGRA210_MIXER) += snd-soc-tegra210-mixer.o +obj-$(CONFIG_SND_SOC_TEGRA210_OPE) += snd-soc-tegra210-ope.o # Tegra machine Support snd-soc-tegra-wm8903-objs := tegra_wm8903.o
sound/soc/tegra/tegra210_mbdrc.c new file +1012 -0
1,012 lines not on this page · raw message
sound/soc/tegra/tegra210_mbdrc.h new file +215 -0
215 lines not on this page · raw message
sound/soc/tegra/tegra210_ope.c new file +419 -0
419 lines not on this page · raw message
sound/soc/tegra/tegra210_ope.h new file +90 -0
90 lines not on this page · raw message
sound/soc/tegra/tegra210_peq.c new file +434 -0
434 lines not on this page · raw message
sound/soc/tegra/tegra210_peq.h new file +56 -0
56 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 3/6 ASoC: tegra: AHUB routes for OPE module
In reply to Sameer PujarAdd AHUB routes for OPE module. The OPE module can be plugged into audio path as per the need. The routing controls can be used to setup the audio path with OPE similar to the already existing routes. The support is added on Tegra210 and later Tegra SoCs where OPE module is present.
--- sound/soc/tegra/tegra210_ahub.c | 39 +++++++++++++++++++++++++++++++++++---- 1 file changed, 35 insertions(+), 4 deletions(-)
sound/soc/tegra/tegra210_ahub.c +35 -4
@@ -170,6 +170,11 @@ static struct snd_soc_dai_driver tegra210_ahub_dais[] = { DAI(MIXER1 TX3),DAI (MIXER1TX4 ),DAI (MIXER1TX5 ), +/* XBAR -> OPE -> XBAR */ +DAI (OPE1RX ), +DAI (OPE1TX ), +DAI (OPE2RX ), + DAI(OPE2 TX), };static struct snd_soc_dai_driver tegra186_ahub_dais[] = {
@@ -294,6 +299,9 @@ static struct snd_soc_dai_driver tegra186_ahub_dais[] = { DAI(ASRC1 RX6),DAI (ASRC1TX6 ),DAI (ASRC1RX7 ), +/* XBAR -> OPE -> XBAR */ +DAI (OPE1RX ), + DAI(OPE1 TX), };static const char *const tegra210_ahub_mux_texts[] = {
@@ -337,6 +345,8 @@ static const char * const tegra210_ahub_mux_texts[] = {"MIXER1 TX3" ,"MIXER1 TX4" ,"MIXER1 TX5" , +"OPE1" , + "OPE2", }; static const char * const tegra186_ahub_mux_texts[] = {
@@ -408,6 +418,7 @@ static const char * const tegra186_ahub_mux_texts[] = {"ASRC1 TX4" ,"ASRC1 TX5" ,"ASRC1 TX6" , + "OPE1", }; static const unsigned int tegra210_ahub_mux_values[] = {
@@ -459,6 +470,9 @@ static const unsigned int tegra210_ahub_mux_values[] = {MUX_VALUE (1 ,2 ),MUX_VALUE (1 ,3 ),MUX_VALUE (1 ,4 ), +/* OPE */ +MUX_VALUE (2 ,0 ), + MUX_VALUE(2, 1), }; static const unsigned int tegra186_ahub_mux_values[] = {
@@ -540,6 +554,8 @@ static const unsigned int tegra186_ahub_mux_values[] = {MUX_VALUE (3 ,27 ),MUX_VALUE (3 ,28 ),MUX_VALUE (3 ,29 ), +/* OPE */ + MUX_VALUE(2, 0), };/* Controls for t210 */
@@ -584,6 +600,8 @@ MUX_ENUM_CTRL_DECL(t210_mixer17_tx, 0x26);MUX_ENUM_CTRL_DECL (t210_mixer18_tx,0x27 );MUX_ENUM_CTRL_DECL (t210_mixer19_tx,0x28 );MUX_ENUM_CTRL_DECL (t210_mixer110_tx,0x29 ); +MUX_ENUM_CTRL_DECL (t210_ope1_tx,0x40 ); +MUX_ENUM_CTRL_DECL (t210_ope2_tx,0x41 );/* Controls for t186 */ MUX_ENUM_CTRL_DECL_186 (t186_admaif1_tx,0x00 );
@@ -657,6 +675,7 @@ MUX_ENUM_CTRL_DECL_186(t186_asrc14_tx, 0x6f);MUX_ENUM_CTRL_DECL_186 (t186_asrc15_tx,0x70 );MUX_ENUM_CTRL_DECL_186 (t186_asrc16_tx,0x71 );MUX_ENUM_CTRL_DECL_186 (t186_asrc17_tx,0x72 ); +MUX_ENUM_CTRL_DECL_186 (t186_ope1_tx,0x40 );/* Controls for t234 */ MUX_ENUM_CTRL_DECL_234 (t234_mvc1_tx,0x44 );
@@ -758,6 +777,8 @@ static const struct snd_soc_dapm_widget tegra210_ahub_widgets[] = {TX_WIDGETS ("MIXER1 TX3" ),TX_WIDGETS ("MIXER1 TX4" ),TX_WIDGETS ("MIXER1 TX5" ), +WIDGETS ("OPE1" , t210_ope1_tx), + WIDGETS("OPE2", t210_ope2_tx), }; static const struct snd_soc_dapm_widget tegra186_ahub_widgets[] = {
@@ -867,6 +888,7 @@ static const struct snd_soc_dapm_widget tegra186_ahub_widgets[] = {TX_WIDGETS ("ASRC1 TX4" ),TX_WIDGETS ("ASRC1 TX5" ),TX_WIDGETS ("ASRC1 TX6" ), + WIDGETS("OPE1", t186_ope1_tx), }; static const struct snd_soc_dapm_widget tegra234_ahub_widgets[] = {
@@ -976,6 +998,7 @@ static const struct snd_soc_dapm_widget tegra234_ahub_widgets[] = {TX_WIDGETS ("ASRC1 TX4" ),TX_WIDGETS ("ASRC1 TX5" ),TX_WIDGETS ("ASRC1 TX6" ), + WIDGETS("OPE1", t186_ope1_tx), };#define TEGRA_COMMON_MUX_ROUTES (name) \
@@ -1018,7 +1041,11 @@ static const struct snd_soc_dapm_widget tegra234_ahub_widgets[] = { { name " Mux", "MIXER1 TX2", "MIXER1 TX2 XBAR-RX" }, \ { name " Mux", "MIXER1 TX3", "MIXER1 TX3 XBAR-RX" }, \ { name " Mux", "MIXER1 TX4", "MIXER1 TX4 XBAR-RX" }, \ - { name " Mux", "MIXER1 TX5", "MIXER1 TX5 XBAR-RX" }, + { name " Mux", "MIXER1 TX5", "MIXER1 TX5 XBAR-RX" }, \ + { name " Mux", "OPE1", "OPE1 XBAR-RX" }, + +#define TEGRA210_ONLY_MUX_ROUTES(name) \ + { name " Mux", "OPE2", "OPE2 XBAR-RX" }, #define TEGRA186_ONLY_MUX_ROUTES(name) \ { name " Mux", "ADMAIF11", "ADMAIF11 XBAR-RX" }, \
@@ -1050,10 +1077,11 @@ static const struct snd_soc_dapm_widget tegra234_ahub_widgets[] = { { name " Mux", "ASRC1 TX5", "ASRC1 TX5 XBAR-RX" }, \ { name " Mux", "ASRC1 TX6", "ASRC1 TX6 XBAR-RX" }, -#define TEGRA210_MUX_ROUTES(name) \ - TEGRA_COMMON_MUX_ROUTES(name) +#define TEGRA210_MUX_ROUTES(name) \ + TEGRA_COMMON_MUX_ROUTES(name) \ + TEGRA210_ONLY_MUX_ROUTES(name) -#define TEGRA186_MUX_ROUTES(name) \ +#define TEGRA186_MUX_ROUTES(name) \ TEGRA_COMMON_MUX_ROUTES(name) \TEGRA186_ONLY_MUX_ROUTES (name)
@@ -1121,6 +1149,8 @@ static const struct snd_soc_dapm_route tegra210_ahub_routes[] = { TEGRA210_MUX_ROUTES("MIXER1 RX8") TEGRA210_MUX_ROUTES("MIXER1 RX9") TEGRA210_MUX_ROUTES("MIXER1 RX10") + TEGRA210_MUX_ROUTES("OPE1") +TEGRA210_MUX_ROUTES ("OPE2" ) };static const struct snd_soc_dapm_route tegra186_ahub_routes[] = {
@@ -1215,6 +1245,7 @@ static const struct snd_soc_dapm_route tegra186_ahub_routes[] = { TEGRA186_MUX_ROUTES("ASRC1 RX5") TEGRA186_MUX_ROUTES("ASRC1 RX6") TEGRA186_MUX_ROUTES("ASRC1 RX7") +TEGRA186_MUX_ROUTES ("OPE1" ) };static const struct snd_soc_component_driver tegra210_ahub_component = {
Signature · 1 line
2.7.4
PATCH v2 4/6 arm64: defconfig: Build Tegra OPE module
In reply to Sameer PujarOutput Processing Engine (OPE) module is a client of AHUB on Tegra210 and later generations of Tegra SoCs. Enable the driver build to use this in audio path.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -808,6 +808,7 @@ CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA210_AHUB=m CONFIG_SND_SOC_TEGRA210_DMIC=m CONFIG_SND_SOC_TEGRA210_I2S=m +CONFIG_SND_SOC_TEGRA210_OPE=m CONFIG_SND_SOC_TEGRA186_ASRC=m CONFIG_SND_SOC_TEGRA186_DSPK=m CONFIG_SND_SOC_TEGRA210_ADMAIF=m
Signature · 1 line
2.7.4
PATCH v2 5/6 arm64: tegra: Add OPE device on Tegra210 and later
In reply to Sameer PujarOutput Processing Engine (OPE) is a client of AHUB and is present on Tegra210 and later generations of Tegra SoC. Add this device on the relevant SoC DTSI files.
--- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 23 ++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra194.dtsi | 23 ++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra210.dtsi | 40 ++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra234.dtsi | 23 ++++++++++++++++++ 4 files changed, 109 insertions(+)
arch/arm64/boot/dts/nvidia/tegra186.dtsi +23 -0
@@ -509,6 +509,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra186-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra186-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra186-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra186-amixer", "nvidia,tegra210-amixer";
arch/arm64/boot/dts/nvidia/tegra194.dtsi +23 -0
@@ -562,6 +562,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra194-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra194-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra194-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra194-amixer", "nvidia,tegra210-amixer";
arch/arm64/boot/dts/nvidia/tegra210.dtsi +40 -0
@@ -1723,6 +1723,46 @@ status = "disabled"; }; + tegra_ope1: processing-engine@702d8000 { + compatible = "nvidia,tegra210-ope"; + reg = <0x702d8000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@702d8100 { + compatible = "nvidia,tegra210-peq"; + reg = <0x702d8100 0x100>; + }; + + dynamic-range-compressor@702d8200 { + compatible = "nvidia,tegra210-mbdrc"; + reg = <0x702d8200 0x200>; + }; + }; + + tegra_ope2: processing-engine@702d8400 { + compatible = "nvidia,tegra210-ope"; + reg = <0x702d8400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE2"; + status = "disabled"; + + equalizer@702d8500 { + compatible = "nvidia,tegra210-peq"; + reg = <0x702d8500 0x100>; + }; + + dynamic-range-compressor@702d8600 { + compatible = "nvidia,tegra210-mbdrc"; + reg = <0x702d8600 0x200>; + }; + }; + tegra_amixer: amixer@702dbb00 { compatible = "nvidia,tegra210-amixer"; reg = <0x702dbb00 0x800>;
arch/arm64/boot/dts/nvidia/tegra234.dtsi +23 -0
@@ -304,6 +304,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra234-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra234-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra234-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_mvc1: mvc@290a000 { compatible = "nvidia,tegra234-mvc", "nvidia,tegra210-mvc";
Signature · 1 line
2.7.4
PATCH v2 6/6 arm64: tegra: Enable OPE on various platforms
In reply to Sameer PujarEnable OPE module usage on various Jetson platforms. This can be plugged into an audio path using ALSA mixer controls. Add audio-graph-port binding to use OPE device with generic audio-graph based sound card.
--- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 43 +++++++++++ arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 43 +++++++++++ .../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 43 +++++++++++ arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 84 ++++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 84 ++++++++++++++++++++++ .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 43 +++++++++++ 6 files changed, 340 insertions(+)
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +43 -0
@@ -915,6 +915,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; admaif@290f000 {
@@ -1911,6 +1927,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + amixer@290bb00 { status = "okay";
@@ -2552,6 +2593,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>,
@@ -2571,6 +2613,7 @@ <&mixer_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* I/O */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>,
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +43 -0
67 lines not on this page · raw message
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +43 -0
67 lines not on this page · raw message
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +84 -0
108 lines not on this page · raw message
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +84 -0
108 lines not on this page · raw message
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +43 -0
67 lines not on this page · raw message
Signature · 1 line
2.7.4