bonding: show NS IPv6 targets in proc master info
Subsystems (3)
PATCH v3 1/1 bonding: show NS IPv6 targets in proc master info
When adding bond new parameter ns_targets. I forgot to print this in bond master proc info. After updating, the bond master info will look like:
ARP IP target/s (n.n.n.n form): 192.168.1.254
NS IPv6 target/s (XX::XX form): 2022::1, 2022::2
---
v3: fix description typo as Jon pointed.
v2: add CONFIG_IPV6 gating
--- drivers/net/bonding/bond_procfs.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
drivers/net/bonding/bond_procfs.c +15 -0
@@ -129,6 +129,21 @@ static void bond_info_show_master(struct seq_file *seq) printed =1 ; }seq_printf (seq,"\n" ); + +#if IS_ENABLED (CONFIG_IPV6 ) + printed =0 ; +seq_printf (seq,"NS IPv6 target/s (xx::xx form):" ); + +for (i =0 ; (i <BOND_MAX_NS_TARGETS ); i++) { +if (ipv6_addr_any (&bond->params.ns_targets[i])) +break ; +if (printed) +seq_printf (seq,"," ); +seq_printf (seq," %pI6c" , &bond->params.ns_targets[i]); + printed =1 ; + } +seq_printf (seq,"\n" ); +#endif }if (BOND_MODE (bond) ==BOND_MODE_8023AD ) {
Signature · 1 line
2.35.1
This patch was applied to netdev/net.git (master) by Paolo Abeni <[email protected]>:
Hello:
This patch was applied to netdev/net.git (master)
by Paolo Abeni <[email protected]>:
Quoted 8 lines · On Mon, 30 May 2022 14:26:39 +0800 you wrote:
When adding bond new parameter
ns_targets. I forgot to print this in bond master proc info. After updating, the bond master info will look like:ARP IP target/s (n.n.n.n form): 192.168.1.254
NS IPv6 target/s (XX::XXform): 2022::1, 2022::2[...]
Here is the summary with links:
- [PATCHv3,net] bonding: show NS IPv6 targets in proc master info
https://git.kernel.org/netdev/net/c/4a1f14df55d1
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html