FAILED: patch "[PATCH] serial: pch: don't overwrite xmit->buf[0] by x_char" failed to apply to 4.9-stable tree
Subsystems (2)
[email protected]
maintainerThe patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d9f3af4fbb1d955bbaf872d9e76502f6e3e803cb Mon Sep 17 00:00:00 2001
From: Jiri Slaby <[email protected]>
Date: Tue, 3 May 2022 10:08:03 +0200
Subject: [PATCH] serial: pch: don't overwrite xmit->buf[0] by x_char
When x_char is to be sent, the TX path overwrites whatever is in the circular buffer at offset 0 with x_char and sends it using pch_uart_hal_write(). I don't understand how this was supposed to work if xmit->buf[0] already contained some character. It must have been lost.
Remove this whole pop_tx_x() concept and do the work directly in the callers. (Without printing anything using dev_dbg().)
drivers/tty/serial/pch_uart.c +7 -20
@@ -624,22 +624,6 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf,return 0 ; } -static int pop_tx_x (struct eg20t_port *priv,unsigned char *buf) -{ -int ret =0 ; -struct uart_port *port = &priv->port; - -if (port->x_char) { -dev_dbg (priv->port.dev,"%s:X character send %02x (%lu)\n" , - __func__, port->x_char, jiffies); - buf[0 ] = port->x_char; - port->x_char =0 ; - ret =1 ; - } - -return ret; -} -static int dma_push_rx (struct eg20t_port *priv,int size) {int room;
@@ -889,9 +873,10 @@ static unsigned int handle_tx(struct eg20t_port *priv) fifo_size =max (priv->fifo_size,1 ); tx_empty =1 ; -if (pop_tx_x (priv, xmit->buf)) { -pch_uart_hal_write (priv, xmit->buf,1 ); +if (port->x_char) { +pch_uart_hal_write (priv, &port->x_char,1 ); port->icount.tx++; + port->x_char =0 ; tx_empty =0 ; fifo_size--; }
@@ -948,9 +933,11 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) } fifo_size =max (priv->fifo_size,1 ); -if (pop_tx_x (priv, xmit->buf)) { -pch_uart_hal_write (priv, xmit->buf,1 ); + +if (port->x_char) { +pch_uart_hal_write (priv, &port->x_char,1 ); port->icount.tx++; + port->x_char =0 ; fifo_size--; }