Skip to contentSkip to conversation

baseband/turbo_sw: Remove flexran_sdk meson option

PATCH Superseded Nicolas Chautru 2 participants 5 messages Jun 27, 2022 – Jun 29, 2022 Arm/Amlogic Meson SoC support

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 baseband/turbo_sw: Remove flexran_sdk meson option

v2: typo in documentation

Hi Thomas,
This is change you requested earlier this year. This is targeting 22.11.
Basically we no longer pass a specific option but rely on pkgconfig.
There is small change to generate the .pc files that Intel will make available by end of year. Still the related change in DPDK is available now.

Thanks
Nic

Nicolas Chautru (1):
baseband/turbo_sw: remove Flexran SDK meson option

 doc/guides/bbdevs/turbo_sw.rst        |  6 ++++--
 drivers/baseband/turbo_sw/meson.build | 36 +++++++++++++----------------------
 meson_options.txt                     |  2 --
 3 files changed, 17 insertions(+), 27 deletions(-)
Signature · 1 line
1.8.3.1
#1 lore raw

PATCH v2 1/1 baseband/turbo_sw: remove Flexran SDK meson option

The related dependency to build the PMD based on the SDK libraries is now enabled through pkfconfig.

---
 doc/guides/bbdevs/turbo_sw.rst        |  6 ++++--
 drivers/baseband/turbo_sw/meson.build | 36 +++++++++++++----------------------
 meson_options.txt                     |  2 --
 3 files changed, 17 insertions(+), 27 deletions(-)
doc/guides/bbdevs/turbo_sw.rst +4 -2
index 1e23e37..24a9621 100644
@@ -136,7 +136,8 @@ In order to enable this virtual bbdev PMD, the user may:
   FlexRAN SDK libraries were installed. And ``DIR_WIRELESS_SDK`` to the path
   where the libraries were extracted.
 
-* Tune the meson build option pointing the location of the FlexRAN SDK libraries ``flexran_sdk``
+* Point pkgconfig towards these libraries so that they can be automatically found by meson.
+  If not DPDK will still compile but the related functionality would be stubbed out.
 
 Example:
 
@@ -144,8 +145,9 @@ Example:
 
     export FLEXRAN_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx2-icc/install
     export DIR_WIRELESS_SDK=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx2-icc/
+    export PKG_CONFIG_PATH=$DIR_WIRELESS_SDK/pkgcfg:$PKG_CONFIG_PATH
     cd build
-    meson configure -Dflexran_sdk=<path-to-workspace>/FlexRAN-FEC-SDK-19-04/sdk/build-avx512-icc/install
+    meson configure
 
 * For AVX512 machines with SDK libraries installed then both 4G and 5G can be enabled for full real time FEC capability.
   For AVX2 machines it is possible to only enable the 4G libraries and the PMD capabilities will be limited to 4G FEC.
drivers/baseband/turbo_sw/meson.build +13 -23
index 477b8b3..9e35156 100644
@@ -1,38 +1,28 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2019 Intel Corporation
 
-path = get_option('flexran_sdk')
+# check for FlexRAN SDK libraries
+dep_turbo = dependency('flexran_sdk_turbo', required: false)
+dep_dec5g = dependency('flexran_sdk_ldpc_decoder_5gnr', required: false)
 
-# check for FlexRAN SDK libraries for AVX2
-lib4g = cc.find_library('libturbo', dirs: [path + '/lib_turbo'], required: false)
-if lib4g.found()
-    ext_deps += cc.find_library('libturbo', dirs: [path + '/lib_turbo'], required: true)
-    ext_deps += cc.find_library('libcrc', dirs: [path + '/lib_crc'], required: true)
-    ext_deps += cc.find_library('librate_matching', dirs: [path + '/lib_rate_matching'], required: true)
-    ext_deps += cc.find_library('libcommon', dirs: [path + '/lib_common'], required: true)
+if dep_turbo.found()
     ext_deps += cc.find_library('libstdc++', required: true)
     ext_deps += cc.find_library('libirc', required: true)
     ext_deps += cc.find_library('libimf', required: true)
     ext_deps += cc.find_library('libipps', required: true)
     ext_deps += cc.find_library('libsvml', required: true)
-    includes += include_directories(path + '/lib_turbo')
-    includes += include_directories(path + '/lib_crc')
-    includes += include_directories(path + '/lib_rate_matching')
-    includes += include_directories(path + '/lib_common')
+	ext_deps += dep_turbo
+	ext_deps += dependency('flexran_sdk_crc', required: true)
+	ext_deps += dependency('flexran_sdk_rate_matching', required: true)
+	ext_deps += dependency('flexran_sdk_common', required: true)
     cflags += ['-DRTE_BBDEV_SDK_AVX2']
 endif
 
-# check for FlexRAN SDK libraries for AVX512
-lib5g = cc.find_library('libldpc_decoder_5gnr', dirs: [path + '/lib_ldpc_decoder_5gnr'], required: false)
-if lib5g.found()
-    ext_deps += cc.find_library('libldpc_encoder_5gnr', dirs: [path + '/lib_ldpc_encoder_5gnr'], required: true)
-    ext_deps += cc.find_library('libldpc_decoder_5gnr', dirs: [path + '/lib_ldpc_decoder_5gnr'], required: true)
-    ext_deps += cc.find_library('libLDPC_ratematch_5gnr', dirs: [path + '/lib_LDPC_ratematch_5gnr'], required: true)
-    ext_deps += cc.find_library('librate_dematching_5gnr', dirs: [path + '/lib_rate_dematching_5gnr'], required: true)
-    includes += include_directories(path + '/lib_ldpc_encoder_5gnr')
-    includes += include_directories(path + '/lib_ldpc_decoder_5gnr')
-    includes += include_directories(path + '/lib_LDPC_ratematch_5gnr')
-    includes += include_directories(path + '/lib_rate_dematching_5gnr')
+if dep_dec5g.found()
+	ext_deps += dep_dec5g
+	ext_deps += dependency('flexran_sdk_ldpc_encoder_5gnr', required: true)
+	ext_deps += dependency('flexran_sdk_LDPC_ratematch_5gnr', required: true)
+	ext_deps += dependency('flexran_sdk_rate_dematching_5gnr', required: true)
     cflags += ['-DRTE_BBDEV_SDK_AVX512']
 endif
 
meson_options.txt +0 -2
index 7c220ad..abaa304 100644
@@ -22,8 +22,6 @@ option('enable_kmods', type: 'boolean', value: false, description:
        'build kernel modules')
 option('examples', type: 'string', value: '', description:
        'Comma-separated list of examples to build by default')
-option('flexran_sdk', type: 'string', value: '', description:
-       'Path to FlexRAN SDK optional Libraries for BBDEV device')
 option('ibverbs_link', type: 'combo', choices : ['static', 'shared', 'dlopen'], value: 'shared', description:
        'Linkage method (static/shared/dlopen) for Mellanox PMDs with ibverbs dependencies.')
 option('include_subdir_arch', type: 'string', value: '', description:
Signature · 1 line
1.8.3.1
#2 lore raw
In reply to Nicolas Chautru

27/06/2022 22:29, Nicolas Chautru:

Quoted 2 lines

Hi Thomas,
This is change you requested earlier this year. This is targeting 22.11.

OK thanks.

Quoted 2 lines

Basically we no longer pass a specific option but rely on pkgconfig.
There is small change to generate the .pc files that Intel will make available by end of year. Still the related change in DPDK is available now.

It means we depend on a future version of Flexran? Please could you document the minimum version?

Note: I think you messed tab indents in the meson file.

#3 lore raw
Quoted 6 lines

From: Thomas Monjalon <[email protected]>

27/06/2022 22:29, Nicolas Chautru:

Quoted 2 lines

Hi Thomas,
This is change you requested earlier this year. This is targeting 22.11.

Quoted 8 lines

OK thanks.

Quoted 2 lines

Basically we no longer pass a specific option but rely on pkgconfig. There is small change to generate the .pc files that Intel will make available

by end of year. Still the related change in DPDK is available now.

It means we depend on a future version of Flexran? Please could you document the minimum version?

I expect the new version to be available in FlexRAN 22.11 (hence in November as well). Is that a concern?

Quoted 3 lines

Note: I think you messed tab indents in the meson file.

Thanks. Will fix now and send a v3

#4 lore raw

29/06/2022 02:16, Chautru, Nicolas:

Quoted 8 lines
Quoted 8 lines

From: Thomas Monjalon <[email protected]>

27/06/2022 22:29, Nicolas Chautru:

Quoted 2 lines

Hi Thomas,
This is change you requested earlier this year. This is targeting 22.11.

OK thanks.

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

Basically we no longer pass a specific option but rely on pkgconfig. There is small change to generate the .pc files that Intel will make available

by end of year. Still the related change in DPDK is available now.

It means we depend on a future version of Flexran? Please could you document the minimum version?

I expect the new version to be available in FlexRAN 22.11 (hence in November as well). Is that a concern?

One concern is to be able to test.
I guess it won't be an issue for you.

The other concern is to mandate the new version to the users. I am fine with that as long as it is documented.