Skip to contentSkip to conversation

Add watchdog timer support for Tegra186/194/234 SoCs

PATCH Applied Kartik 5 participants 14 messages Jul 4, 2022 – Jul 28, 2022

Subsystems (3)
lore
Share & tools
lore

Kartik

author
#0 lore raw

v3 cover Add watchdog timer support for Tegra186/194/234 SoCs

The native timers IP block found on Tegra SoCs implements a watchdog timer that can be used to recover from system hangs. This series of patches adds support for watchdog timers available on Tegra186, Tegra194 and Tegra234 SOC's.

To keep the history intact, I added Tegra234 driver change as separate. The original patchset is an old one authored by Thierry.

Kartik (4):
dt-bindings: timer: Add Tegra186 & Tegra234 Timer clocksource/drivers/timer-tegra186: Add support for Tegra234 SoC
arm64: tegra: Enable native timers on Tegra186
arm64: tegra: Enable native timers on Tegra234

Thierry Reding (2):
clocksource: Add Tegra186 timers support
arm64: tegra: Enable native timers on Tegra194

 .../bindings/timer/nvidia,tegra186-timer.yaml | 109 ++++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi      |   2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |  16 +
 arch/arm64/boot/dts/nvidia/tegra234.dtsi      |  22 +
 drivers/clocksource/Kconfig                   |   8 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-tegra186.c          | 514 ++++++++++++++++++
 7 files changed, 671 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
 create mode 100644 drivers/clocksource/timer-tegra186.c
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v3 1/6 dt-bindings: timer: Add Tegra186 & Tegra234 Timer

The Tegra186 timer provides ten 29-bit timer counters and one 32-bit timestamp counter. The Tegra234 timer provides sixteen 29-bit timer counters and one 32-bit timestamp counter. Each NV timer selects its timing reference signal from the 1 MHz reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be programmed to generate one-shot, periodic, or watchdog interrupts.

---
 .../bindings/timer/nvidia,tegra186-timer.yaml | 109 ++++++++++++++++++
 1 file changed, 109 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml new file +109 -0
new file mode 100644
index 000000000000..db8b5595540f
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra186 timer
+
+maintainers:
+  - Thierry Reding <[email protected]>
+
+description: >
+  The Tegra timer provides 29-bit timer counters and a 32-bit timestamp
+  counter. Each NV timer selects its timing reference signal from the 1 MHz
+  reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be
+  programmed to generate one-shot, periodic, or watchdog interrupts.
+
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-timer
+        description: >
+          The Tegra186 timer provides ten 29-bit timer counters.
+      - const: nvidia,tegra234-timer
+        description: >
+          The Tegra234 timer provides sixteen 29-bit timer counters.
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-timer
+    then:
+      properties:
+        interrupts:
+          maxItems: 10
+          description: >
+            One per each timer channels 0 through 9.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra234-timer
+    then:
+      properties:
+        interrupts:
+          maxItems: 16
+          description: >
+            One per each timer channels 0 through 15.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@3010000 {
+        compatible = "nvidia,tegra186-timer";
+        reg = <0x03010000 0x000e0000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@2080000 {
+        compatible = "nvidia,tegra234-timer";
+        reg = <0x02080000 0x00121000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
Signature · 1 line
2.17.1
maintainer Reviewed-by on v3 1/6
#2 lore raw

Re: [PATCH v3 1/6] dt-bindings: timer: Add Tegra186 & Tegra234 Timer

Quoted 7 lines · Kartik

The Tegra186 timer provides ten 29-bit timer counters and one 32-bit timestamp counter. The Tegra234 timer provides sixteen 29-bit timer counters and one 32-bit timestamp counter. Each NV timer selects its timing reference signal from the 1 MHz reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be programmed to generate one-shot, periodic, or watchdog interrupts.

Quoted 6 lines
---
 .../bindings/timer/nvidia,tegra186-timer.yaml | 109 ++++++++++++++++++
 1 file changed, 109 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
author
#3 lore raw

PATCH v3 2/6 clocksource: Add Tegra186 timers support

In reply to Kartik

From: Thierry Reding <[email protected]>

Currently this only supports a single watchdog, which uses a timer in the background for countdown. Eventually the timers could be used for various time-keeping tasks, but by default the architected timer will already provide that functionality.

---
 drivers/clocksource/Kconfig          |   8 +
 drivers/clocksource/Makefile         |   1 +
 drivers/clocksource/timer-tegra186.c | 508 +++++++++++++++++++++++++++
 3 files changed, 517 insertions(+)
 create mode 100644 drivers/clocksource/timer-tegra186.c
drivers/clocksource/Kconfig +8 -0
index 49960eb22f19..5bbc4aacff4c 100644
@@ -156,6 +156,14 @@ config TEGRA_TIMER
 	help
 	  Enables support for the Tegra driver.
 
+config TEGRA186_TIMER
+	tristate "NVIDIA Tegra186 timer driver"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on WATCHDOG && WATCHDOG_CORE
+	help
+	  Enables support for the timers and watchdogs found on NVIDIA
+	  Tegra186 and later SoCs.
+
 config VT8500_TIMER
 	bool "VT8500 timer driver" if COMPILE_TEST
 	depends on HAS_IOMEM
drivers/clocksource/Makefile +1 -0
index 59c8909df9f3..64ab547de97b 100644
@@ -36,6 +36,7 @@ obj-$(CONFIG_SUN4I_TIMER)	+= timer-sun4i.o
 obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
 obj-$(CONFIG_MESON6_TIMER)	+= timer-meson6.o
 obj-$(CONFIG_TEGRA_TIMER)	+= timer-tegra.o
+obj-$(CONFIG_TEGRA186_TIMER)	+= timer-tegra186.o
 obj-$(CONFIG_VT8500_TIMER)	+= timer-vt8500.o
 obj-$(CONFIG_NSPIRE_TIMER)	+= timer-zevio.o
 obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
drivers/clocksource/timer-tegra186.c new file +508 -0

508 lines not on this page · raw message

Signature · 1 line
2.17.1
Acked-by on v3 2/6
#4 lore raw

Re: [PATCH v3 2/6] clocksource: Add Tegra186 timers support

Quoted 7 lines · Kartik

From: Thierry Reding <[email protected]>

Currently this only supports a single watchdog, which uses a timer in the background for countdown. Eventually the timers could be used for various time-keeping tasks, but by default the architected timer will already provide that functionality.

Quoted 8 lines
---
 drivers/clocksource/Kconfig          |   8 +
 drivers/clocksource/Makefile         |   1 +
 drivers/clocksource/timer-tegra186.c | 508 +++++++++++++++++++++++++++
 3 files changed, 517 insertions(+)
 create mode 100644 drivers/clocksource/timer-tegra186.c

Daniel, any more work needed on this? Looks good to me, so:

I've picked up patches 1 and 4-6 into the Tegra tree, so you only need to take patches 2 and 3.

Thanks,
Thierry

#5 lore raw

Re: [PATCH v3 2/6] clocksource: Add Tegra186 timers support

Quoted 17 lines · Thierry Reding
Quoted 7 lines · Kartik

From: Thierry Reding <[email protected]>

Currently this only supports a single watchdog, which uses a timer in the background for countdown. Eventually the timers could be used for various time-keeping tasks, but by default the architected timer will already provide that functionality.

Quoted 8 lines
---
  drivers/clocksource/Kconfig          |   8 +
  drivers/clocksource/Makefile         |   1 +
  drivers/clocksource/timer-tegra186.c | 508 +++++++++++++++++++++++++++
  3 files changed, 517 insertions(+)

create mode 100644 drivers/clocksource/timer-tegra186.c

Quoted 6 lines

Daniel, any more work needed on this? Looks good to me, so:

I've picked up patches 1 and 4-6 into the Tegra tree, so you only need to take patches 2 and 3.

Applied, thanks

Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
merge bot Applied
#6 lore raw

[tip: timers/core] clocksource: Add Tegra186 timers support

In reply to Kartik
The following commit has been merged into the timers/core branch of tip:

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     42cee19a9f839f2d60f1cd237d6905d8649127aa
Gitweb:        https://git.kernel.org/tip/42cee19a9f839f2d60f1cd237d6905d8649127aa
Author:        Thierry Reding <[email protected]>
AuthorDate:    Mon, 04 Jul 2022 13:43:38 +05:30
Committer:     Daniel Lezcano <[email protected]>
CommitterDate: Sat, 16 Jul 2022 00:38:50 +02:00

clocksource: Add Tegra186 timers support

Currently this only supports a single watchdog, which uses a timer in the background for countdown. Eventually the timers could be used for various time-keeping tasks, but by default the architected timer will already provide that functionality.

---
 drivers/clocksource/Kconfig          |   8 +-
 drivers/clocksource/Makefile         |   1 +-
 drivers/clocksource/timer-tegra186.c | 508 ++++++++++++++++++++++++++-
 3 files changed, 517 insertions(+)
 create mode 100644 drivers/clocksource/timer-tegra186.c
drivers/clocksource/Kconfig +8 -0
index 0367a1c..2dcdf02 100644
@@ -150,6 +150,14 @@ config TEGRA_TIMER
 	help
 	  Enables support for the Tegra driver.
 
+config TEGRA186_TIMER
+	tristate "NVIDIA Tegra186 timer driver"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on WATCHDOG && WATCHDOG_CORE
+	help
+	  Enables support for the timers and watchdogs found on NVIDIA
+	  Tegra186 and later SoCs.
+
 config VT8500_TIMER
 	bool "VT8500 timer driver" if COMPILE_TEST
 	depends on HAS_IOMEM
drivers/clocksource/Makefile +1 -0
index 9c85ee2..685430d 100644
@@ -36,6 +36,7 @@ obj-$(CONFIG_SUN4I_TIMER)	+= timer-sun4i.o
 obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
 obj-$(CONFIG_MESON6_TIMER)	+= timer-meson6.o
 obj-$(CONFIG_TEGRA_TIMER)	+= timer-tegra.o
+obj-$(CONFIG_TEGRA186_TIMER)	+= timer-tegra186.o
 obj-$(CONFIG_VT8500_TIMER)	+= timer-vt8500.o
 obj-$(CONFIG_NSPIRE_TIMER)	+= timer-zevio.o
 obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
drivers/clocksource/timer-tegra186.c new file +508 -0

508 lines not on this page · raw message

author
#7 lore raw

PATCH v3 3/6 clocksource/drivers/timer-tegra186: Add support for Tegra234 SoC

In reply to Kartik

The timer IP block present on Tegra234 SoC supports watchdog timer functionality that can be used to recover from system hangs. The watchdog timer uses a timer in the background for countdown.

---
 drivers/clocksource/timer-tegra186.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/clocksource/timer-tegra186.c +6 -0
index 4515517c87a5..ea742889ee06 100644
@@ -486,8 +486,14 @@ static const struct tegra186_timer_soc tegra186_timer = {
 	.num_wdts = 3,
 };
 
+static const struct tegra186_timer_soc tegra234_timer = {
+	.num_timers = 16,
+	.num_wdts = 3,
+};
+
 static const struct of_device_id tegra186_timer_of_match[] = {
 	{ .compatible = "nvidia,tegra186-timer", .data = &tegra186_timer },
+	{ .compatible = "nvidia,tegra234-timer", .data = &tegra234_timer },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tegra186_timer_of_match);
Signature · 1 line
2.17.1
Acked-by on v3 3/6
#8 lore raw

Re: [PATCH v3 3/6] clocksource/drivers/timer-tegra186: Add support for Tegra234 SoC

Quoted 8 lines · Kartik

The timer IP block present on Tegra234 SoC supports watchdog timer functionality that can be used to recover from system hangs. The watchdog timer uses a timer in the background for countdown.

---
 drivers/clocksource/timer-tegra186.c | 6 ++++++
 1 file changed, 6 insertions(+)
merge bot Applied
#9 lore raw

[tip: timers/core] clocksource/drivers/timer-tegra186: Add support for Tegra234 SoC

In reply to Kartik
The following commit has been merged into the timers/core branch of tip:

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     07385a6055a8649593052703b1bfd6aef49db02a
Gitweb:        https://git.kernel.org/tip/07385a6055a8649593052703b1bfd6aef49db02a
Author:        Kartik <[email protected]>
AuthorDate:    Mon, 04 Jul 2022 13:43:39 +05:30
Committer:     Daniel Lezcano <[email protected]>
CommitterDate: Sat, 16 Jul 2022 00:38:50 +02:00

clocksource/drivers/timer-tegra186: Add support for Tegra234 SoC

The timer IP block present on Tegra234 SoC supports watchdog timer functionality that can be used to recover from system hangs. The watchdog timer uses a timer in the background for countdown.

---
 drivers/clocksource/timer-tegra186.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/clocksource/timer-tegra186.c +6 -0
index 4515517..ea74288 100644
@@ -486,8 +486,14 @@ static const struct tegra186_timer_soc tegra186_timer = {
 	.num_wdts = 3,
 };
 
+static const struct tegra186_timer_soc tegra234_timer = {
+	.num_timers = 16,
+	.num_wdts = 3,
+};
+
 static const struct of_device_id tegra186_timer_of_match[] = {
 	{ .compatible = "nvidia,tegra186-timer", .data = &tegra186_timer },
+	{ .compatible = "nvidia,tegra234-timer", .data = &tegra234_timer },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tegra186_timer_of_match);
author
#10 lore raw

PATCH v3 4/6 arm64: tegra: Enable native timers on Tegra186

In reply to Kartik

Enable the native timers on Tegra186 chips to allow using the watchdog functionality to recover from system hangs.

---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra186.dtsi +1 -1
index a87b52434939..a07acdaf345f 100644
@@ -599,7 +599,7 @@
 			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
+		status = "okay";
 	};
 
 	uarta: serial@3100000 {
Signature · 1 line
2.17.1
author
#11 lore raw

PATCH v3 5/6 arm64: tegra: Enable native timers on Tegra194

In reply to Kartik

From: Thierry Reding <[email protected]>

The native timers IP block found on NVIDIA Tegra SoCs implements a watchdog timer that can be used to recover from system hangs. Add and enable the device tree node on Tegra194.

---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/nvidia/tegra194.dtsi +16 -0
index 9566c6388ed9..4b37aec69448 100644
@@ -698,6 +698,22 @@
 			};
 		};
 
+		timer@3010000 {
+			compatible = "nvidia,tegra186-timer";
+			reg = <0x03010000 0x000e0000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
 		uarta: serial@3100000 {
 			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
 			reg = <0x03100000 0x40>;
Signature · 1 line
2.17.1
author
#12 lore raw

PATCH v3 6/6 arm64: tegra: Enable native timers on Tegra234

In reply to Kartik

The native timers IP block found on NVIDIA Tegra SoCs implements a watchdog timer that can be used to recover from system hangs. Add and enable the device tree node on Tegra234.

---
 arch/arm64/boot/dts/nvidia/tegra234.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
arch/arm64/boot/dts/nvidia/tegra234.dtsi +22 -0
index cf611eff7f6b..aa8ceb3c329b 100644
@@ -519,6 +519,28 @@
 			status = "okay";
 		};
 
+		timer@2080000 {
+			compatible = "nvidia,tegra234-timer";
+			reg = <0x02080000 0x00121000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
 		gpio: gpio@2200000 {
 			compatible = "nvidia,tegra234-gpio";
 			reg-names = "security", "gpio";
Signature · 1 line
2.17.1
#13 lore raw
In reply to Kartik
Quoted 18 lines · Kartik

The native timers IP block found on Tegra SoCs implements a watchdog timer that can be used to recover from system hangs. This series of patches adds support for watchdog timers available on Tegra186, Tegra194 and Tegra234 SOC's.

To keep the history intact, I added Tegra234 driver change as separate. The original patchset is an old one authored by Thierry.

Kartik (4):
dt-bindings: timer: Add Tegra186 & Tegra234 Timer clocksource/drivers/timer-tegra186: Add support for Tegra234 SoC
arm64: tegra: Enable native timers on Tegra186
arm64: tegra: Enable native timers on Tegra234

Thierry Reding (2):
clocksource: Add Tegra186 timers support
arm64: tegra: Enable native timers on Tegra194

Quoted 10 lines
 .../bindings/timer/nvidia,tegra186-timer.yaml | 109 ++++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi      |   2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |  16 +
 arch/arm64/boot/dts/nvidia/tegra234.dtsi      |  22 +
 drivers/clocksource/Kconfig                   |   8 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-tegra186.c          | 514 ++++++++++++++++++
 7 files changed, 671 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
 create mode 100644 drivers/clocksource/timer-tegra186.c

Applied patches 1 and 4-6 to the Tegra tree, thanks.

Thierry