FAILED: patch "[PATCH] net: dp83822: disable false carrier interrupt" failed to apply to 4.19-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From c96614eeab663646f57f67aa591e015abd8bd0ba Mon Sep 17 00:00:00 2001
From: Enguerrand de Ribaucourt <[email protected]>
Date: Thu, 23 Jun 2022 15:46:44 +0200
Subject: [PATCH] net: dp83822: disable false carrier interrupt
When unplugging an Ethernet cable, false carrier events were produced by the PHY at a very high rate. Once the false carrier counter full, an interrupt was triggered every few clock cycles until the cable was replugged. This resulted in approximately 10k/s interrupts.
Since the false carrier counter (FCSCR) is never used, we can safely disable this interrupt.
In addition to improving performance, this also solved MDIO read timeouts I was randomly encountering with an i.MX8 fec MAC because of the interrupt flood. The interrupt count and MDIO timeout fix were tested on a v5.4.110 kernel.
drivers/net/phy/dp83822.c +0 -1
@@ -230,7 +230,6 @@ static int dp83822_config_intr(struct phy_device *phydev)return misr_status; misr_status |= (DP83822_RX_ERR_HF_INT_EN | -DP83822_FALSE_CARRIER_HF_INT_EN |DP83822_LINK_STAT_INT_EN |DP83822_ENERGY_DET_INT_EN |DP83822_LINK_QUAL_INT_EN );