Introduce Microsoft Azure Network Adatper (MANA) PMD
Subsystems (2)
v3 cover Introduce Microsoft Azure Network Adatper (MANA) PMD
From: Long Li <[email protected]>
MANA is a network interface card to be used in the Azure cloud environment. MANA provides safe access to user memory through memory registration. It has IOMMU built into the hardware.
MANA uses IB verbs and RDMA layer to configure hardware resources. It requires the corresponding RDMA kernel-mode and user-mode drivers.
The MANA RDMA kernel-mode driver is being reviewed at:
https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
The MANA RDMA user-mode driver is being reviewed at:
https://github.com/linux-rdma/rdma-core/pull/1177
Long Li (17):
net/mana: add basic driver, build environment and doc net/mana: add device configuration and stop net/mana: add function to report support ptypes net/mana: add link update
net/mana: add function for device removal interrupts net/mana: add device info
net/mana: add function to configure RSS net/mana: add function to configure RX queues net/mana: add function to configure TX queues net/mana: implement memory registration net/mana: implement the hardware layer operations net/mana: add function to start/stop TX queues net/mana: add function to start/stop RX queues net/mana: add function to receive packets net/mana: add function to send packets net/mana: add function to start/stop device net/mana: add function to report queue stats
MAINTAINERS | 6 + doc/guides/nics/features/mana.ini | 20 + doc/guides/nics/index.rst | 1 + doc/guides/nics/mana.rst | 66 ++ drivers/net/mana/gdma.c | 284 ++++++ drivers/net/mana/mana.c | 1351 +++++++++++++++++++++++++++++ drivers/net/mana/mana.h | 544 ++++++++++++ drivers/net/mana/meson.build | 48 + drivers/net/mana/mp.c | 323 +++++++ drivers/net/mana/mr.c | 324 +++++++ drivers/net/mana/rx.c | 449 ++++++++++ drivers/net/mana/tx.c | 398 +++++++++ drivers/net/mana/version.map | 3 + drivers/net/meson.build | 1 + 14 files changed, 3818 insertions(+) create mode 100644 doc/guides/nics/features/mana.ini create mode 100644 doc/guides/nics/mana.rst create mode 100644 drivers/net/mana/gdma.c create mode 100644 drivers/net/mana/mana.c create mode 100644 drivers/net/mana/mana.h create mode 100644 drivers/net/mana/meson.build create mode 100644 drivers/net/mana/mp.c create mode 100644 drivers/net/mana/mr.c create mode 100644 drivers/net/mana/rx.c create mode 100644 drivers/net/mana/tx.c create mode 100644 drivers/net/mana/version.map
Signature · 1 line
2.17.1
PATCH v3 1/17 net/mana: add basic driver, build environment and doc
From: Long Li <[email protected]>
MANA is a PCI device. It uses IB verbs to access hardware through the kernel RDMA layer. This patch introduces build environment and basic device probe functions.
---
Change log:
v2:
Fix typos.
Make the driver build only on x86-64 and Linux.
Remove unused header files.
Change port definition to uint16_t or uint8_t (for IB).
Use getline() in place of fgets() to read and truncate a line. v3:
Add meson build check for required functions from RDMA direct verb header file
MAINTAINERS | 6 + doc/guides/nics/features/mana.ini | 10 + doc/guides/nics/index.rst | 1 + doc/guides/nics/mana.rst | 66 +++ drivers/net/mana/mana.c | 704 ++++++++++++++++++++++++++++++ drivers/net/mana/mana.h | 210 +++++++++ drivers/net/mana/meson.build | 44 ++ drivers/net/mana/mp.c | 235 ++++++++++ drivers/net/mana/version.map | 3 + drivers/net/meson.build | 1 + 10 files changed, 1280 insertions(+) create mode 100644 doc/guides/nics/features/mana.ini create mode 100644 doc/guides/nics/mana.rst create mode 100644 drivers/net/mana/mana.c create mode 100644 drivers/net/mana/mana.h create mode 100644 drivers/net/mana/meson.build create mode 100644 drivers/net/mana/mp.c create mode 100644 drivers/net/mana/version.map
MAINTAINERS +6 -0
@@ -837,6 +837,12 @@ F: buildtools/options-ibverbs-static.sh F: doc/guides/nics/mlx5.rst F: doc/guides/nics/features/mlx5.ini +Microsoft mana +M: Long Li <[email protected]> +F: drivers/net/mana +F: doc/guides/nics/mana.rst +F: doc/guides/nics/features/mana.ini + Microsoft vdev_netvsc - EXPERIMENTAL M: Matan Azrad <[email protected]> F: drivers/net/vdev_netvsc/
doc/guides/nics/features/mana.ini new file +10 -0
@@ -0,0 +1,10 @@ +; +; Supported features of the 'mana' network poll mode driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Linux = Y +Multiprocess aware = Y +Usage doc = Y +x86-64 = Y
doc/guides/nics/index.rst +1 -0
@@ -41,6 +41,7 @@ Network Interface Controller Drivers intel_vf kni liquidio + mana memif mlx4 mlx5
doc/guides/nics/mana.rst new file +66 -0
66 lines not on this page · raw message
drivers/net/mana/mana.c new file +704 -0
704 lines not on this page · raw message
drivers/net/mana/mana.h new file +210 -0
210 lines not on this page · raw message
drivers/net/mana/meson.build new file +44 -0
44 lines not on this page · raw message
drivers/net/mana/mp.c new file +235 -0
235 lines not on this page · raw message
drivers/net/mana/version.map new file +3 -0
@@ -0,0 +1,3 @@ +DPDK_22 { + local: *; +};
drivers/net/meson.build +1 -0
@@ -34,6 +34,7 @@ drivers = [ 'ixgbe', 'kni', 'liquidio', + 'mana', 'memif', 'mlx4', 'mlx5',
Signature · 1 line
2.17.1
Re: [Patch v3 01/17] net/mana: add basic driver, build environment and doc
drivers/net/mana/mana.c line 203
Quoted 1 line · On Thu, 7 Jul 2022 13:30:06 -0700 [email protected] wrote:
drivers/net/mana/mana.c new file +1
-0+ file =fopen (path,"rb" );
Minor nit, if you make any later changes.
"rb" is same as "r" on Linux. b means binary, and this is actually a text file.
RE: [Patch v3 01/17] net/mana: add basic driver, build environment and doc
Quoted 10 lines
Subject: Re: [Patch v3 01/17] net/mana: add basic driver, build environment and doc
drivers/net/mana/mana.c line 203
Quoted 1 line · On Thu, 7 Jul 2022 13:30:06 -0700 [email protected] wrote:
drivers/net/mana/mana.c new file +1
-0+ file =fopen (path,"rb" );Minor nit, if you make any later changes.
"rb" is same as "r" on Linux. b means binary, and this is actually a text file.
Will fix this.
Re: [Patch v3 01/17] net/mana: add basic driver, build environment and doc
In reply to [email protected]Quoted 177 lines · On Thu, 7 Jul 2022 13:30:06 -0700 [email protected] wrote:
drivers/net/mana/mana.c new file +177
-0+static int mana_pci_probe_mac(struct rte_pci_driver *pci_drv __rte_unused, +struct rte_pci_device *pci_dev, +struct rte_ether_addr *mac_addr) +{ +struct ibv_device **ibv_list; +int ibv_idx; +struct ibv_context *ctx; +struct ibv_device_attr_ex dev_attr; +int num_devices; +int ret =0 ; +uint8_t port; +struct mana_priv *priv =NULL ; +struct rte_eth_dev *eth_dev =NULL ; +bool found_port; + + ibv_list =ibv_get_device_list (&num_devices); +for (ibv_idx =0 ; ibv_idx < num_devices; ibv_idx++) { +struct ibv_device *ibdev = ibv_list[ibv_idx]; +struct rte_pci_addr pci_addr; + +DRV_LOG (INFO ,"Probe device name %s dev_name %s ibdev_path %s" , + ibdev->name, ibdev->dev_name, ibdev->ibdev_path); + +if (mana_ibv_device_to_pci_addr (ibdev, &pci_addr)) +continue ; + +/* Ignore if this IB device is not this PCI device */ +if (pci_dev->addr.domain != pci_addr.domain || + pci_dev->addr.bus != pci_addr.bus || + pci_dev->addr.devid != pci_addr.devid || + pci_dev->addr.function != pci_addr.function) +continue ; + + ctx =ibv_open_device (ibdev); +if (!ctx) { +DRV_LOG (ERR ,"Failed to open IB device %s" , + ibdev->name); +continue ; + } + + ret =ibv_query_device_ex (ctx,NULL , &dev_attr); +DRV_LOG (INFO ,"dev_attr.orig_attr.phys_port_cnt %u" , + dev_attr.orig_attr.phys_port_cnt); + found_port = false; + +for (port =1 ; port <= dev_attr.orig_attr.phys_port_cnt; + port++) { +struct ibv_parent_domain_init_attr attr = {}; +struct rte_ether_addr addr; +char address[64 ]; +char name[RTE_ETH_NAME_MAX_LEN ]; + + ret =get_port_mac (ibdev, port, &addr); +if (ret) +continue ; + +if (mac_addr && !rte_is_same_ether_addr (&addr, mac_addr)) +continue ; + +rte_ether_format_addr (address,sizeof (address), &addr); +DRV_LOG (INFO ,"device located port %u address %s" , + port, address); + found_port = true; + + priv =rte_zmalloc_socket (NULL ,sizeof (*priv), +RTE_CACHE_LINE_SIZE , +SOCKET_ID_ANY ); +if (!priv) { + ret = -ENOMEM ; + goto failed; + } + +snprintf (name,sizeof (name),"%s_port%d" , + pci_dev->device.name, port); + +if (rte_eal_process_type () ==RTE_PROC_SECONDARY ) { +int fd; + + eth_dev =rte_eth_dev_attach_secondary (name); +if (!eth_dev) { +DRV_LOG (ERR ,"Can't attach to dev %s" , + name); + ret = -ENOMEM ; + goto failed; + } + + eth_dev->device = &pci_dev->device; + eth_dev->dev_ops = &mana_dev_sec_ops; + ret =mana_proc_priv_init (eth_dev); +if (ret) + goto failed; + priv->process_priv = eth_dev->process_private; + +/* Get the IB FD from the primary process */ + fd =mana_mp_req_verbs_cmd_fd (eth_dev); +if (fd <0 ) { +DRV_LOG (ERR ,"Failed to get FD %d" , fd); + ret = -ENODEV ; + goto failed; + } + + ret =mana_map_doorbell_secondary (eth_dev, fd); +if (ret) { +DRV_LOG (ERR ,"Failed secondary map %d" , + fd); + goto failed; + } + +/* fd is no not used after mapping doorbell */ +close (fd); + +rte_spinlock_lock (&mana_shared_data->lock); + mana_shared_data->secondary_cnt++; + mana_local_data.secondary_cnt++; +rte_spinlock_unlock (&mana_shared_data->lock); + +rte_eth_copy_pci_info (eth_dev, pci_dev); +rte_eth_dev_probing_finish (eth_dev); + +/* Impossible to have more than one port +* matching a MAC address +*/ +continue ; + } + + eth_dev =rte_eth_dev_allocate (name); +if (!eth_dev) { + ret = -ENOMEM ; + goto failed; + } + + eth_dev->data->mac_addrs = +rte_calloc ("mana_mac" ,1 , +sizeof (struct rte_ether_addr ),0 ); +if (!eth_dev->data->mac_addrs) { + ret = -ENOMEM ; + goto failed; + } + +rte_ether_addr_copy (&addr, eth_dev->data->mac_addrs); + + priv->ib_pd =ibv_alloc_pd (ctx); +if (!priv->ib_pd) { +DRV_LOG (ERR ,"ibv_alloc_pd failed port %d" , port); + ret = -ENOMEM ; + goto failed; + } + +/* Create a parent domain with the port number */ + attr.pd = priv->ib_pd; + attr.comp_mask =IBV_PARENT_DOMAIN_INIT_ATTR_PD_CONTEXT ; + attr.pd_context = (void *)(uint64_t )port; + priv->ib_parent_pd =ibv_alloc_parent_domain (ctx, &attr); +if (!priv->ib_parent_pd) { +DRV_LOG (ERR , +"ibv_alloc_parent_domain failed port %d" , + port); + ret = -ENOMEM ; + goto failed; + } + + priv->ib_ctx = ctx; + priv->port_id = eth_dev->data->port_id; + priv->dev_port = port; + eth_dev->data->dev_private = priv; + priv->dev_data = eth_dev->data; + + priv->max_rx_queues = dev_attr.orig_attr.max_qp; + priv->max_tx_queues = dev_attr.orig_attr.max_qp; + + priv->max_rx_desc = +RTE_MIN (dev_attr.orig_attr.max_qp_wr, + dev_attr.orig_attr.max_cqe); + priv->max_tx_desc = +RTE_MIN (dev_attr.orig_attr.max_qp_wr, + dev_attr.orig_attr.max_cqe); +
drivers/net/mana/mana.c line 537
Quoted 10 lines
drivers/net/mana/mana.c new file +10
-0+ priv->max_send_sge = dev_attr.orig_attr.max_sge; + priv->max_recv_sge = dev_attr.orig_attr.max_sge; + + priv->max_mr = dev_attr.orig_attr.max_mr; + priv->max_mr_size = dev_attr.orig_attr.max_mr_size; + +DRV_LOG (INFO ,"dev %s max queues %d desc %d sge %d\n" , + name, priv->max_rx_queues, priv->max_rx_desc, + priv->max_send_sge); +
Message will end up double spaced, since DRV_LOG already adds newline. You might also want to use %u rather than %d when the values are unsigned.
PATCH v3 2/17 net/mana: add device configuration and stop
In reply to [email protected]From: Long Li <[email protected]>
MANA defines its memory allocation functions to override IB layer default functions to allocate device queues. This patch adds the code for device configuration and stop.
---
Change log:
v2:
Removed validation for offload settings in mana_dev_configure().
drivers/net/mana/mana.c | 75 +++++++++++++++++++++++++++++++++++++++-- drivers/net/mana/mana.h | 3 ++ 2 files changed, 76 insertions(+), 2 deletions(-)
drivers/net/mana/mana.c +73 -2
@@ -40,7 +40,79 @@ static rte_spinlock_t mana_shared_data_lock = RTE_SPINLOCK_INITIALIZER;int mana_logtype_driver;int mana_logtype_init; +void *mana_alloc_verbs_buf (size_t size,void *data) +{ +void *ret; +size_t alignment =rte_mem_page_size (); +int socket = (int )(uintptr_t )data; + +DRV_LOG (DEBUG ,"size=%zu socket=%d" , size, socket); + +if (alignment == (size_t )-1 ) { +DRV_LOG (ERR ,"Failed to get mem page size" ); + rte_errno =ENOMEM ; +return NULL ; + } + + ret =rte_zmalloc_socket ("mana_verb_buf" , size, alignment, socket); +if (!ret && size) + rte_errno =ENOMEM ; +return ret; +} + +void mana_free_verbs_buf(void *ptr, void *data __rte_unused) +{ +rte_free (ptr); +} + +static int mana_dev_configure (struct rte_eth_dev *dev) +{ +struct mana_priv *priv = dev->data->dev_private; +struct rte_eth_conf *dev_conf = &dev->data->dev_conf; + +if (dev_conf->rxmode.mq_mode Ð_MQ_RX_RSS_FLAG ) + dev_conf->rxmode.offloads |=DEV_RX_OFFLOAD_RSS_HASH ; + +if (dev->data->nb_rx_queues != dev->data->nb_tx_queues) { +DRV_LOG (ERR ,"Only support equal number of rx/tx queues" ); +return -EINVAL ; + } + +if (!rte_is_power_of_2 (dev->data->nb_rx_queues)) { +DRV_LOG (ERR ,"number of TX/RX queues must be power of 2" ); +return -EINVAL ; + } + + priv->num_queues = dev->data->nb_rx_queues; + +manadv_set_context_attr (priv->ib_ctx,MANADV_CTX_ATTR_BUF_ALLOCATORS , + (void *)((uintptr_t )&(struct manadv_ctx_allocators ){ + .alloc = &mana_alloc_verbs_buf, + .free = &mana_free_verbs_buf, + .data =0 , + })); + +return 0 ; +} + +static int +mana_dev_close (struct rte_eth_dev *dev) +{ +struct mana_priv *priv = dev->data->dev_private; +int ret; + + ret =ibv_close_device (priv->ib_ctx); +if (ret) { + ret = errno; +return ret; + } + +return 0 ; +} +const struct eth_dev_ops mana_dev_ops = { + .dev_configure = mana_dev_configure, + .dev_close = mana_dev_close, };const struct eth_dev_ops mana_dev_sec_ops = {
@@ -627,8 +699,7 @@ static int mana_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,static int mana_dev_uninit (struct rte_eth_dev *dev) { -RTE_SET_USED (dev); -return 0 ; +return mana_dev_close (dev); }static int mana_pci_remove (struct rte_pci_device *pci_dev)
drivers/net/mana/mana.h +3 -0
@@ -207,4 +207,7 @@ int mana_mp_req_verbs_cmd_fd(struct rte_eth_dev *dev);void mana_mp_req_on_rxtx (struct rte_eth_dev *dev,enum mana_mp_req_type type); +void *mana_alloc_verbs_buf (size_t size,void *data); +void mana_free_verbs_buf(void *ptr, void *data __rte_unused); +#endif
Signature · 1 line
2.17.1
PATCH v3 3/17 net/mana: add function to report support ptypes
In reply to [email protected]From: Long Li <[email protected]>
Report supported protocol types.
--- drivers/net/mana/mana.c | 16 ++++++++++++++++ drivers/net/mana/mana.h | 2 -- 2 files changed, 16 insertions(+), 2 deletions(-)
drivers/net/mana/mana.c +16 -0
@@ -110,9 +110,25 @@ mana_dev_close(struct rte_eth_dev *dev)return 0 ; } +static const uint32_t *mana_supported_ptypes(struct rte_eth_dev *dev __rte_unused) +{ +static const uint32_t ptypes[] = { +RTE_PTYPE_L2_ETHER , +RTE_PTYPE_L3_IPV4_EXT_UNKNOWN , +RTE_PTYPE_L3_IPV6_EXT_UNKNOWN , +RTE_PTYPE_L4_FRAG , +RTE_PTYPE_L4_TCP , +RTE_PTYPE_L4_UDP , +RTE_PTYPE_UNKNOWN + }; + +return ptypes; +} +const struct eth_dev_ops mana_dev_ops = { .dev_configure = mana_dev_configure, .dev_close = mana_dev_close, + .dev_supported_ptypes_get = mana_supported_ptypes, };const struct eth_dev_ops mana_dev_sec_ops = {
drivers/net/mana/mana.h +0 -2
@@ -168,8 +168,6 @@ extern int mana_logtype_init;#define PMD_INIT_FUNC_TRACE () PMD_INIT_LOG(DEBUG, " >>") -const uint32_t *mana_supported_ptypes (struct rte_eth_dev *dev); -uint16_t mana_rx_burst_removed (void *dpdk_rxq,struct rte_mbuf **pkts,uint16_t pkts_n);
Signature · 1 line
2.17.1
PATCH v3 4/17 net/mana: add link update
In reply to [email protected]From: Long Li <[email protected]>
The carrier state is managed by the Azure host. MANA runs as a VF and always reports "up".
--- doc/guides/nics/features/mana.ini | 1 + drivers/net/mana/mana.c | 17 +++++++++++++++++ 2 files changed, 18 insertions(+)
doc/guides/nics/features/mana.ini +1 -0
@@ -4,6 +4,7 @@ ; Refer to default.ini for the full list of available PMD features. ; [Features] +Link status = P Linux = Y Multiprocess aware = Y Usage doc = Y
drivers/net/mana/mana.c +17 -0
@@ -125,10 +125,27 @@ static const uint32_t *mana_supported_ptypes(struct rte_eth_dev *dev __rte_unusereturn ptypes; } +static int mana_dev_link_update (struct rte_eth_dev *dev, + int wait_to_complete __rte_unused) +{ +struct rte_eth_link link; + +/* MANA has no concept of carrier state, always reporting UP */ + link = (struct rte_eth_link ) { + .link_duplex =RTE_ETH_LINK_FULL_DUPLEX , + .link_autoneg =RTE_ETH_LINK_SPEED_FIXED , + .link_speed =RTE_ETH_SPEED_NUM_200G , + .link_status =RTE_ETH_LINK_UP , + }; + +return rte_eth_linkstatus_set (dev, &link); +} +const struct eth_dev_ops mana_dev_ops = { .dev_configure = mana_dev_configure, .dev_close = mana_dev_close, .dev_supported_ptypes_get = mana_supported_ptypes, + .link_update = mana_dev_link_update, };const struct eth_dev_ops mana_dev_sec_ops = {
Signature · 1 line
2.17.1
PATCH v3 5/17 net/mana: add function for device removal interrupts
In reply to [email protected]From: Long Li <[email protected]>
MANA supports PCI hot plug events. Add this interrupt to DPDK core so its parent PMD can detect device removal during Azure servicing or live migration.
--- doc/guides/nics/features/mana.ini | 1 + drivers/net/mana/mana.c | 97 +++++++++++++++++++++++++++++++ drivers/net/mana/mana.h | 1 + 3 files changed, 99 insertions(+)
doc/guides/nics/features/mana.ini +1 -0
@@ -7,5 +7,6 @@ Link status = P Linux = Y Multiprocess aware = Y +Removal event = Y Usage doc = Y x86-64 = Y
drivers/net/mana/mana.c +97 -0
121 lines not on this page · raw message
drivers/net/mana/mana.h +1 -0
@@ -72,6 +72,7 @@ struct mana_priv {uint8_t ind_table_key[40 ];struct ibv_qp *rwq_qp;void *db_page; +struct rte_intr_handle *intr_handle;int max_rx_queues;int max_tx_queues;int max_rx_desc;
Signature · 1 line
2.17.1
PATCH v3 6/17 net/mana: add device info
In reply to [email protected]From: Long Li <[email protected]>
Add the function to get device info.
--- doc/guides/nics/features/mana.ini | 1 + drivers/net/mana/mana.c | 82 +++++++++++++++++++++++++++++++ 2 files changed, 83 insertions(+)
doc/guides/nics/features/mana.ini +1 -0
@@ -8,5 +8,6 @@ Link status = P Linux = Y Multiprocess aware = Y Removal event = Y +Speed capabilities = P Usage doc = Y x86-64 = Y
drivers/net/mana/mana.c +82 -0
99 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v3 7/17 net/mana: add function to configure RSS
In reply to [email protected]From: Long Li <[email protected]>
Currently this PMD supports RSS configuration when the device is stopped. Configuring RSS in running state will be supported in the future.
--- doc/guides/nics/features/mana.ini | 1 + drivers/net/mana/mana.c | 61 +++++++++++++++++++++++++++++++ drivers/net/mana/mana.h | 1 + 3 files changed, 63 insertions(+)
doc/guides/nics/features/mana.ini +1 -0
@@ -8,6 +8,7 @@ Link status = P Linux = Y Multiprocess aware = Y Removal event = Y +RSS hash = Y Speed capabilities = P Usage doc = Y x86-64 = Y
drivers/net/mana/mana.c +61 -0
73 lines not on this page · raw message
drivers/net/mana/mana.h +1 -0
@@ -72,6 +72,7 @@ struct mana_priv {uint8_t ind_table_key[40 ];struct ibv_qp *rwq_qp;void *db_page; +struct rte_eth_rss_conf rss_conf;struct rte_intr_handle *intr_handle;int max_rx_queues;int max_tx_queues;
Signature · 1 line
2.17.1
PATCH v3 8/17 net/mana: add function to configure RX queues
In reply to [email protected]From: Long Li <[email protected]>
RX hardware queue is allocated when starting the queue. This function is for queue configuration pre starting.
--- drivers/net/mana/mana.c | 68 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+)
drivers/net/mana/mana.c +68 -0
@@ -196,6 +196,16 @@ static int mana_dev_info_get(struct rte_eth_dev *dev,return 0 ; } +static void mana_dev_rx_queue_info (struct rte_eth_dev *dev,uint16_t queue_id, +struct rte_eth_rxq_info *qinfo) +{ +struct mana_rxq *rxq = dev->data->rx_queues[queue_id]; + + qinfo->mp = rxq->mp; + qinfo->nb_desc = rxq->num_desc; + qinfo->conf.offloads = dev->data->dev_conf.rxmode.offloads; +} + static const uint32_t *mana_supported_ptypes(struct rte_eth_dev *dev __rte_unused) {static const uint32_t ptypes[] = {
@@ -270,6 +280,61 @@ static int mana_rss_hash_conf_get(struct rte_eth_dev *dev,return 0 ; } +static int mana_dev_rx_queue_setup (struct rte_eth_dev *dev, +uint16_t queue_idx,uint16_t nb_desc, +unsigned int socket_id, + const struct rte_eth_rxconf *rx_conf __rte_unused, +struct rte_mempool *mp) +{ +struct mana_priv *priv = dev->data->dev_private; +struct mana_rxq *rxq; +int ret; + + rxq =rte_zmalloc_socket ("mana_rxq" ,sizeof (*rxq),0 , socket_id); +if (!rxq) { +DRV_LOG (ERR ,"failed to allocate rxq" ); +return -ENOMEM ; + } + +DRV_LOG (DEBUG ,"idx %u nb_desc %u socket %u" , + queue_idx, nb_desc, socket_id); + + rxq->socket = socket_id; + + rxq->desc_ring =rte_zmalloc_socket ("mana_rx_mbuf_ring" , +sizeof (struct mana_rxq_desc ) * + nb_desc, +RTE_CACHE_LINE_SIZE , socket_id); + +if (!rxq->desc_ring) { +DRV_LOG (ERR ,"failed to allocate rxq desc_ring" ); + ret = -ENOMEM ; + goto fail; + } + + rxq->num_desc = nb_desc; + + rxq->priv = priv; + rxq->num_desc = nb_desc; + rxq->mp = mp; + dev->data->rx_queues[queue_idx] = rxq; + +return 0 ; + +fail: +rte_free (rxq->desc_ring); +rte_free (rxq); +return ret; +} + +static void mana_dev_rx_queue_release (struct rte_eth_dev *dev,uint16_t qid) +{ +struct mana_rxq *rxq = dev->data->rx_queues[qid]; + +rte_free (rxq->desc_ring); +rte_free (rxq); +} +static int mana_dev_link_update (struct rte_eth_dev *dev, int wait_to_complete __rte_unused) {
@@ -290,9 +355,12 @@ const struct eth_dev_ops mana_dev_ops = { .dev_configure = mana_dev_configure, .dev_close = mana_dev_close, .dev_infos_get = mana_dev_info_get, + .rxq_info_get = mana_dev_rx_queue_info, .dev_supported_ptypes_get = mana_supported_ptypes, .rss_hash_update = mana_rss_hash_update, .rss_hash_conf_get = mana_rss_hash_conf_get, + .rx_queue_setup = mana_dev_rx_queue_setup, + .rx_queue_release = mana_dev_rx_queue_release, .link_update = mana_dev_link_update, };
Signature · 1 line
2.17.1
PATCH v3 9/17 net/mana: add function to configure TX queues
In reply to [email protected]From: Long Li <[email protected]>
TX hardware queue is allocated when starting the queue, this is for pre configuration.
--- drivers/net/mana/mana.c | 65 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+)
drivers/net/mana/mana.c +65 -0
@@ -196,6 +196,15 @@ static int mana_dev_info_get(struct rte_eth_dev *dev,return 0 ; } +static void mana_dev_tx_queue_info (struct rte_eth_dev *dev,uint16_t queue_id, +struct rte_eth_txq_info *qinfo) +{ +struct mana_txq *txq = dev->data->tx_queues[queue_id]; + + qinfo->conf.offloads = dev->data->dev_conf.txmode.offloads; + qinfo->nb_desc = txq->num_desc; +} +static void mana_dev_rx_queue_info (struct rte_eth_dev *dev,uint16_t queue_id,struct rte_eth_rxq_info *qinfo) {
@@ -280,6 +289,59 @@ static int mana_rss_hash_conf_get(struct rte_eth_dev *dev,return 0 ; } +static int mana_dev_tx_queue_setup (struct rte_eth_dev *dev, +uint16_t queue_idx,uint16_t nb_desc, +unsigned int socket_id, + const struct rte_eth_txconf *tx_conf __rte_unused) + +{ +struct mana_priv *priv = dev->data->dev_private; +struct mana_txq *txq; +int ret; + + txq =rte_zmalloc_socket ("mana_txq" ,sizeof (*txq),0 , socket_id); +if (!txq) { +DRV_LOG (ERR ,"failed to allocate txq" ); +return -ENOMEM ; + } + + txq->socket = socket_id; + + txq->desc_ring =rte_malloc_socket ("mana_tx_desc_ring" , +sizeof (struct mana_txq_desc ) * + nb_desc, +RTE_CACHE_LINE_SIZE , socket_id); +if (!txq->desc_ring) { +DRV_LOG (ERR ,"failed to allocate txq desc_ring" ); + ret = -ENOMEM ; + goto fail; + } + +DRV_LOG (DEBUG ,"idx %u nb_desc %u socket %u txq->desc_ring %p" , + queue_idx, nb_desc, socket_id, txq->desc_ring); + + txq->desc_ring_head =0 ; + txq->desc_ring_tail =0 ; + txq->priv = priv; + txq->num_desc = nb_desc; + dev->data->tx_queues[queue_idx] = txq; + +return 0 ; + +fail: +rte_free (txq->desc_ring); +rte_free (txq); +return ret; +} + +static void mana_dev_tx_queue_release (struct rte_eth_dev *dev,uint16_t qid) +{ +struct mana_txq *txq = dev->data->tx_queues[qid]; + +rte_free (txq->desc_ring); +rte_free (txq); +} + static int mana_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx, uint16_t nb_desc, unsigned int socket_id,
@@ -355,10 +417,13 @@ const struct eth_dev_ops mana_dev_ops = { .dev_configure = mana_dev_configure, .dev_close = mana_dev_close, .dev_infos_get = mana_dev_info_get, + .txq_info_get = mana_dev_tx_queue_info, .rxq_info_get = mana_dev_rx_queue_info, .dev_supported_ptypes_get = mana_supported_ptypes, .rss_hash_update = mana_rss_hash_update, .rss_hash_conf_get = mana_rss_hash_conf_get, + .tx_queue_setup = mana_dev_tx_queue_setup, + .tx_queue_release = mana_dev_tx_queue_release, .rx_queue_setup = mana_dev_rx_queue_setup, .rx_queue_release = mana_dev_rx_queue_release, .link_update = mana_dev_link_update,
Signature · 1 line
2.17.1
PATCH v3 10/17 net/mana: implement memory registration
In reply to [email protected]From: Long Li <[email protected]>
MANA hardware has iommu built-in, that provides hardware safe access to user memory through memory registration. Since memory registration is an expensive operation, this patch implements a two level memory registration cache mechanisum for each queue and for each port.
---
Change log:
v2:
Change all header file functions to start with mana_. Use spinlock in place of rwlock to memory cache access. Remove unused header files.
drivers/net/mana/mana.c | 20 +++ drivers/net/mana/mana.h | 39 +++++ drivers/net/mana/meson.build | 1 + drivers/net/mana/mp.c | 85 +++++++++ drivers/net/mana/mr.c | 324 +++++++++++++++++++++++++++++++++++ 5 files changed, 469 insertions(+) create mode 100644 drivers/net/mana/mr.c
drivers/net/mana/mana.c +20 -0
@@ -103,6 +103,8 @@ mana_dev_close(struct rte_eth_dev *dev)struct mana_priv *priv = dev->data->dev_private;int ret; +mana_remove_all_mr (priv); + ret =mana_intr_uninstall (priv);if (ret)return ret;
@@ -317,6 +319,13 @@ static int mana_dev_tx_queue_setup(struct rte_eth_dev *dev, goto fail; } + ret =mana_mr_btree_init (&txq->mr_btree, +MANA_MR_BTREE_PER_QUEUE_N , socket_id); +if (ret) { +DRV_LOG (ERR ,"Failed to init TXQ MR btree" ); + goto fail; + } +DRV_LOG (DEBUG ,"idx %u nb_desc %u socket %u txq->desc_ring %p" , queue_idx, nb_desc, socket_id, txq->desc_ring);
@@ -338,6 +347,8 @@ static void mana_dev_tx_queue_release(struct rte_eth_dev *dev, uint16_t qid) {struct mana_txq *txq = dev->data->tx_queues[qid]; +mana_mr_btree_free (&txq->mr_btree); +rte_free (txq->desc_ring);rte_free (txq); }
@@ -374,6 +385,13 @@ static int mana_dev_rx_queue_setup(struct rte_eth_dev *dev, goto fail; } + ret =mana_mr_btree_init (&rxq->mr_btree, +MANA_MR_BTREE_PER_QUEUE_N , socket_id); +if (ret) { +DRV_LOG (ERR ,"Failed to init RXQ MR btree" ); + goto fail; + } + rxq->num_desc = nb_desc; rxq->priv = priv;
@@ -393,6 +411,8 @@ static void mana_dev_rx_queue_release(struct rte_eth_dev *dev, uint16_t qid) {struct mana_rxq *rxq = dev->data->rx_queues[qid]; +mana_mr_btree_free (&rxq->mr_btree); +rte_free (rxq->desc_ring);rte_free (rxq); }
drivers/net/mana/mana.h +39 -0
@@ -50,6 +50,22 @@ struct mana_shared_data {#define MAX_RECEIVE_BUFFERS_PER_QUEUE 256#define MAX_SEND_BUFFERS_PER_QUEUE 256 +struct mana_mr_cache { +uint32_t lkey; +uintptr_t addr; +size_t len; +void *verb_obj; +}; + +#define MANA_MR_BTREE_CACHE_N 512 +struct mana_mr_btree { +uint16_t len;/* Used entries */ +uint16_t size;/* Total entries */ +int overflow; +int socket; +struct mana_mr_cache *table; +}; +struct mana_process_priv {void *db_page; };
@@ -82,6 +98,8 @@ struct mana_priv {int max_recv_sge;int max_mr;uint64_t max_mr_size; +struct mana_mr_btree mr_btree; +rte_spinlock_t mr_btree_lock; };struct mana_txq_desc {
@@ -131,6 +149,7 @@ struct mana_txq {uint32_t desc_ring_head, desc_ring_tail;struct mana_stats stats; +struct mana_mr_btree mr_btree;unsigned int socket; };
@@ -153,6 +172,7 @@ struct mana_rxq {struct mana_gdma_queue gdma_cq;struct mana_stats stats; +struct mana_mr_btree mr_btree;unsigned int socket; };
@@ -176,6 +196,24 @@ uint16_t mana_rx_burst_removed(void *dpdk_rxq, struct rte_mbuf **pkts,uint16_t mana_tx_burst_removed (void *dpdk_rxq,struct rte_mbuf **pkts,uint16_t pkts_n); +struct mana_mr_cache *mana_find_pmd_mr (struct mana_mr_btree *local_tree, +struct mana_priv *priv, +struct rte_mbuf *mbuf); +int mana_new_pmd_mr (struct mana_mr_btree *local_tree,struct mana_priv *priv, +struct rte_mempool *pool); +void mana_remove_all_mr (struct mana_priv *priv); +void mana_del_pmd_mr (struct mana_mr_cache *mr); + +void mana_mempool_chunk_cb (struct rte_mempool *mp,void *opaque, +struct rte_mempool_memhdr *memhdr,unsigned int idx); + +struct mana_mr_cache *mana_mr_btree_lookup (struct mana_mr_btree *bt, +uint16_t *idx, +uintptr_t addr,size_t len); +int mana_mr_btree_insert (struct mana_mr_btree *bt,struct mana_mr_cache *entry); +int mana_mr_btree_init (struct mana_mr_btree *bt,int n,int socket); +void mana_mr_btree_free (struct mana_mr_btree *bt); +/** Request timeout for IPC. */ #define MANA_MP_REQ_TIMEOUT_SEC 5
@@ -204,6 +242,7 @@ int mana_mp_init_secondary(void);void mana_mp_uninit_primary (void );void mana_mp_uninit_secondary (void );int mana_mp_req_verbs_cmd_fd (struct rte_eth_dev *dev); +int mana_mp_req_mr_create (struct mana_priv *priv,uintptr_t addr,uint32_t len);void mana_mp_req_on_rxtx (struct rte_eth_dev *dev,enum mana_mp_req_type type);
drivers/net/mana/meson.build +1 -0
@@ -11,6 +11,7 @@ deps += ['pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mana.c', + 'mr.c', 'mp.c', )
drivers/net/mana/mp.c +85 -0
103 lines not on this page · raw message
drivers/net/mana/mr.c new file +324 -0
324 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [Patch v3 10/17] net/mana: implement memory registration
Quoted 6 lines · On Thu, 7 Jul 2022 13:30:15 -0700 [email protected] wrote:
drivers/net/mana/mr.c new file +6
-0+int mana_new_pmd_mr (struct mana_mr_btree *local_tree,struct mana_priv *priv, +struct rte_mempool *pool) +{ +struct ibv_mr *ibv_mr; +struct mana_range ranges[pool->nb_mem_chunks]; +uint32_t i;
drivers/net/mana/mr.c line 47
Quoted 10 lines
drivers/net/mana/mr.c new file +10
-0+struct mana_mr_cache *mr; +int ret; + +rte_mempool_mem_iter (pool, mana_mempool_chunk_cb, ranges); + +for (i =0 ; i < pool->nb_mem_chunks; i++) { +if (ranges[i].len > priv->max_mr_size) { +DRV_LOG (ERR ,"memory chunk size %u exceeding max MR\n" , + ranges[i].len); +return -ENOMEM ;
Did a quick search for extra newlines.
Looks like this message will end up double spaced in log. DRV_LOG already adds a newline.
RE: [Patch v3 10/17] net/mana: implement memory registration
Quoted 21 lines
Subject: Re: [Patch v3 10/17] net/mana: implement memory registration
Quoted 1 line · On Thu, 7 Jul 2022 13:30:15 -0700 [email protected] wrote:
+int mana_new_pmd_mr(struct
mana_mr_btree*local_tree, structmana_priv*priv,
drivers/net/mana/mr.c
Quoted 13 lines
drivers/net/mana/mr.c new file +13
-0+ struct rte_mempool *pool) +{ +struct ibv_mr *ibv_mr; +struct mana_range ranges[pool->nb_mem_chunks]; +uint32_t i; +struct mana_mr_cache *mr; +int ret; + +rte_mempool_mem_iter (pool, mana_mempool_chunk_cb, ranges); + +for (i =0 ; i < pool->nb_mem_chunks; i++) { +if (ranges[i].len > priv->max_mr_size) { + DRV_LOG(ERR, "memory chunk size %u exceeding maxMR\n",
Quoted 6 lines
drivers/net/mana/mr.c line 47
Quoted 2 lines
drivers/net/mana/mr.c new file +2
-0+ ranges[i].len); +return -ENOMEM ;Did a quick search for extra newlines.
Looks like this message will end up double spaced in log.DRV_LOGalready adds a newline.
Yes, I will remove all extra spaces in other places as well.
PATCH v3 11/17 net/mana: implement the hardware layer operations
In reply to [email protected]From: Long Li <[email protected]>
The hardware layer of MANA understands the device queue and doorbell formats. Those functions are implemented for use by packet RX/TX code.
---
Change log:
v2:
Remove unused header files.
Rename a camel case.
drivers/net/mana/gdma.c | 284 +++++++++++++++++++++++++++++++++++ drivers/net/mana/mana.h | 183 ++++++++++++++++++++++ drivers/net/mana/meson.build | 1 + 3 files changed, 468 insertions(+) create mode 100644 drivers/net/mana/gdma.c
drivers/net/mana/gdma.c new file +284 -0
@@ -0,0 +1,284 @@ +/* SPDX-License-Identifier: BSD-3-Clause +* Copyright 2022 Microsoft Corporation +*/ + +#include <ethdev_driver.h> +#include <rte_io.h> + +#include "mana.h" + +uint8_t *gdma_get_wqe_pointer (struct mana_gdma_queue *queue) +{ +uint32_t offset_in_bytes = + (queue->head *GDMA_WQE_ALIGNMENT_UNIT_SIZE ) & + (queue->size -1 ); + +DRV_LOG (DEBUG ,"txq sq_head %u sq_size %u offset_in_bytes %u" , + queue->head, queue->size, offset_in_bytes); + +if (offset_in_bytes +GDMA_WQE_ALIGNMENT_UNIT_SIZE > queue->size) +DRV_LOG (ERR ,"fatal error: offset_in_bytes %u too big" , + offset_in_bytes); + +return ((uint8_t *)queue->buffer) + offset_in_bytes; +} + +static uint32_t +write_dma_client_oob (uint8_t *work_queue_buffer_pointer, +const struct gdma_work_request *work_request, +uint32_t client_oob_size) +{ +uint8_t *p = work_queue_buffer_pointer; + +struct gdma_wqe_dma_oob *header = (struct gdma_wqe_dma_oob *)p; + +memset (header,0 ,sizeof (struct gdma_wqe_dma_oob )); + header->num_sgl_entries = work_request->num_sgl_elements; + header->inline_client_oob_size_in_dwords = + client_oob_size /sizeof (uint32_t ); + header->client_data_unit = work_request->client_data_unit; + +DRV_LOG (DEBUG ,"queue buf %p sgl %u oob_h %u du %u oob_buf %p oob_b %u" , + work_queue_buffer_pointer, header->num_sgl_entries, + header->inline_client_oob_size_in_dwords, + header->client_data_unit, work_request->inline_oob_data, + work_request->inline_oob_size_in_bytes); + + p +=sizeof (struct gdma_wqe_dma_oob ); +if (work_request->inline_oob_data && + work_request->inline_oob_size_in_bytes >0 ) { +memcpy (p, work_request->inline_oob_data, + work_request->inline_oob_size_in_bytes); +if (client_oob_size > work_request->inline_oob_size_in_bytes) +memset (p + work_request->inline_oob_size_in_bytes,0 , + client_oob_size - + work_request->inline_oob_size_in_bytes); + } + +return sizeof (struct gdma_wqe_dma_oob ) + client_oob_size; +} + +static uint32_t +write_scatter_gather_list (uint8_t *work_queue_head_pointer, +uint8_t *work_queue_end_pointer, +uint8_t *work_queue_cur_pointer, +struct gdma_work_request *work_request) +{ +struct gdma_sgl_element *sge_list; +struct gdma_sgl_element dummy_sgl[1 ]; +uint8_t *address; +uint32_t size; +uint32_t num_sge; +uint32_t size_to_queue_end; +uint32_t sge_list_size; + +DRV_LOG (DEBUG ,"work_queue_cur_pointer %p work_request->flags %x" , + work_queue_cur_pointer, work_request->flags); + + num_sge = work_request->num_sgl_elements; + sge_list = work_request->sgl; + size_to_queue_end = (uint32_t )(work_queue_end_pointer - + work_queue_cur_pointer); + +if (num_sge ==0 ) { +/* Per spec, the case of an empty SGL should be handled as +* follows to avoid corrupted WQE errors: +* Write one dummy SGL entry +* Set the address to 1, leave the rest as 0 +*/ + dummy_sgl[num_sge].address =1 ; + dummy_sgl[num_sge].size =0 ; + dummy_sgl[num_sge].memory_key =0 ; + num_sge++; + sge_list = dummy_sgl; + } + + sge_list_size =0 ; + { + address = (uint8_t *)sge_list; + size =sizeof (struct gdma_sgl_element ) * num_sge; +if (size_to_queue_end < size) { +memcpy (work_queue_cur_pointer, address, + size_to_queue_end); + work_queue_cur_pointer = work_queue_head_pointer; + address += size_to_queue_end; + size -= size_to_queue_end; + } + +memcpy (work_queue_cur_pointer, address, size); + sge_list_size = size; + } + +DRV_LOG (DEBUG ,"sge %u address 0x%" PRIx64" size %u key %u list_s %u" , + num_sge, sge_list->address, sge_list->size, + sge_list->memory_key, sge_list_size); + +return sge_list_size; +} + +int gdma_post_work_request (struct mana_gdma_queue *queue, +struct gdma_work_request *work_req, +struct gdma_posted_wqe_info *wqe_info) +{ +uint32_t client_oob_size = + work_req->inline_oob_size_in_bytes > +INLINE_OOB_SMALL_SIZE_IN_BYTES ? +INLINE_OOB_LARGE_SIZE_IN_BYTES : +INLINE_OOB_SMALL_SIZE_IN_BYTES ; + +uint32_t sgl_data_size =sizeof (struct gdma_sgl_element ) * +RTE_MAX ((uint32_t )1 , work_req->num_sgl_elements); +uint32_t wqe_size = +RTE_ALIGN (sizeof (struct gdma_wqe_dma_oob ) + + client_oob_size + sgl_data_size, +GDMA_WQE_ALIGNMENT_UNIT_SIZE ); +uint8_t *wq_buffer_pointer; +uint32_t queue_free_units = queue->count - (queue->head - queue->tail); + +if (wqe_size /GDMA_WQE_ALIGNMENT_UNIT_SIZE > queue_free_units) { +DRV_LOG (DEBUG ,"WQE size %u queue count %u head %u tail %u" , + wqe_size, queue->count, queue->head, queue->tail); +return -EBUSY ; + } + +DRV_LOG (DEBUG ,"client_oob_size %u sgl_data_size %u wqe_size %u" , + client_oob_size, sgl_data_size, wqe_size); + +if (wqe_info) { + wqe_info->wqe_index = + ((queue->head *GDMA_WQE_ALIGNMENT_UNIT_SIZE ) & + (queue->size -1 )) /GDMA_WQE_ALIGNMENT_UNIT_SIZE ; + wqe_info->unmasked_queue_offset = queue->head; + wqe_info->wqe_size_in_bu = + wqe_size /GDMA_WQE_ALIGNMENT_UNIT_SIZE ; + } + + wq_buffer_pointer =gdma_get_wqe_pointer (queue); + wq_buffer_pointer +=write_dma_client_oob (wq_buffer_pointer, work_req, + client_oob_size); +if (wq_buffer_pointer >= ((uint8_t *)queue->buffer) + queue->size) + wq_buffer_pointer -= queue->size; + +write_scatter_gather_list ((uint8_t *)queue->buffer, + (uint8_t *)queue->buffer + queue->size, + wq_buffer_pointer, work_req); + + queue->head += wqe_size /GDMA_WQE_ALIGNMENT_UNIT_SIZE ; + +return 0 ; +} + +union gdma_doorbell_entry { +uint64_t as_uint64; + +struct { +uint64_t id :24 ; +uint64_t reserved :8 ; +uint64_t tail_ptr :31 ; +uint64_t arm :1 ; + } cq; + +struct { +uint64_t id :24 ; +uint64_t wqe_cnt :8 ; +uint64_t tail_ptr :32 ; + } rq; + +struct { +uint64_t id :24 ; +uint64_t reserved :8 ; +uint64_t tail_ptr :32 ; + } sq; + +struct { +uint64_t id :16 ; +uint64_t reserved :16 ; +uint64_t tail_ptr :31 ; +uint64_t arm :1 ; + } eq; +};/* HW DATA */ + +#define DOORBELL_OFFSET_SQ 0x0 +#define DOORBELL_OFFSET_RQ 0x400 +#define DOORBELL_OFFSET_CQ 0x800 +#define DOORBELL_OFFSET_EQ 0xFF8 + +int mana_ring_doorbell (void *db_page,enum gdma_queue_types queue_type, +uint32_t queue_id,uint32_t tail) +{ +uint8_t *addr = db_page; +union gdma_doorbell_entry e = {}; + +switch (queue_type) { +case gdma_queue_send: + e.sq.id = queue_id; + e.sq.tail_ptr = tail; + addr +=DOORBELL_OFFSET_SQ ; +break ; + +case gdma_queue_receive: + e.rq.id = queue_id; + e.rq.tail_ptr = tail; + e.rq.wqe_cnt =1 ; + addr +=DOORBELL_OFFSET_RQ ; +break ; + +case gdma_queue_completion: + e.cq.id = queue_id; + e.cq.tail_ptr = tail; + e.cq.arm =1 ; + addr +=DOORBELL_OFFSET_CQ ; +break ; + +default : +DRV_LOG (ERR ,"Unsupported queue type %d" , queue_type); +return -1 ; + } + +rte_wmb (); +DRV_LOG (DEBUG ,"db_page %p addr %p queue_id %u type %u tail %u" , + db_page, addr, queue_id, queue_type, tail); + +rte_write64 (e.as_uint64, addr); +return 0 ; +} + +int gdma_poll_completion_queue (struct mana_gdma_queue *cq, +struct gdma_comp *comp) +{ +struct gdma_hardware_completion_entry *cqe; +uint32_t head = cq->head % cq->count; +uint32_t new_owner_bits, old_owner_bits; +uint32_t cqe_owner_bits; +struct gdma_hardware_completion_entry *buffer = cq->buffer; + + cqe = &buffer[head]; + new_owner_bits = (cq->head / cq->count) &COMPLETION_QUEUE_OWNER_MASK ; + old_owner_bits = (cq->head / cq->count -1 ) & +COMPLETION_QUEUE_OWNER_MASK ; + cqe_owner_bits = cqe->owner_bits; + +DRV_LOG (DEBUG ,"comp cqe bits 0x%x owner bits 0x%x" , + cqe_owner_bits, old_owner_bits); + +if (cqe_owner_bits == old_owner_bits) +return 0 ;/* No new entry */ + +if (cqe_owner_bits != new_owner_bits) { +DRV_LOG (ERR ,"CQ overflowed, ID %u cqe 0x%x new 0x%x" , + cq->id, cqe_owner_bits, new_owner_bits); +return -1 ; + } + + comp->work_queue_number = cqe->wq_num; + comp->send_work_queue = cqe->is_sq; + +memcpy (comp->completion_data, cqe->dma_client_data,GDMA_COMP_DATA_SIZE ); + + cq->head++; + +DRV_LOG (DEBUG ,"comp new 0x%x old 0x%x cqe 0x%x wq %u sq %u head %u" , + new_owner_bits, old_owner_bits, cqe_owner_bits, + comp->work_queue_number, comp->send_work_queue, cq->head); +return 1 ; +}
drivers/net/mana/mana.h +183 -0
201 lines not on this page · raw message
drivers/net/mana/meson.build +1 -0
@@ -12,6 +12,7 @@ deps += ['pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mana.c', 'mr.c', + 'gdma.c', 'mp.c', )
Signature · 1 line
2.17.1
PATCH v3 12/17 net/mana: add function to start/stop TX queues
In reply to [email protected]From: Long Li <[email protected]>
MANA allocate device queues through the IB layer when starting TX queues. When device is stopped all the queues are unmapped and freed.
---
Change log:
v2:
Add prefix mana_ to all function names.
Remove unused header files.
doc/guides/nics/features/mana.ini | 1 + drivers/net/mana/mana.h | 4 + drivers/net/mana/meson.build | 1 + drivers/net/mana/tx.c | 157 ++++++++++++++++++++++++++++++ 4 files changed, 163 insertions(+) create mode 100644 drivers/net/mana/tx.c
doc/guides/nics/features/mana.ini +1 -0
@@ -7,6 +7,7 @@ Link status = P Linux = Y Multiprocess aware = Y +Queue start/stop = Y Removal event = Y RSS hash = Y Speed capabilities = P
drivers/net/mana/mana.h +4 -0
@@ -379,6 +379,10 @@ uint16_t mana_tx_burst_removed(void *dpdk_rxq, struct rte_mbuf **pkts,int gdma_poll_completion_queue (struct mana_gdma_queue *cq,struct gdma_comp *comp); +int mana_start_tx_queues (struct rte_eth_dev *dev); + +int mana_stop_tx_queues (struct rte_eth_dev *dev); +struct mana_mr_cache *mana_find_pmd_mr (struct mana_mr_btree *local_tree,struct mana_priv *priv,struct rte_mbuf *mbuf);
drivers/net/mana/meson.build +1 -0
@@ -11,6 +11,7 @@ deps += ['pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mana.c', + 'tx.c', 'mr.c', 'gdma.c', 'mp.c',
drivers/net/mana/tx.c new file +157 -0
157 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v3 13/17 net/mana: add function to start/stop RX queues
In reply to [email protected]From: Long Li <[email protected]>
MANA allocates device queues through the IB layer when starting RX queues. When device is stopped all the queues are unmapped and freed.
---
Change log:
v2:
Add prefix mana_ to all function names.
Remove unused header files.
drivers/net/mana/mana.h | 3 + drivers/net/mana/meson.build | 1 + drivers/net/mana/rx.c | 345 +++++++++++++++++++++++++++++++++++ 3 files changed, 349 insertions(+) create mode 100644 drivers/net/mana/rx.c
drivers/net/mana/mana.h +3 -0
@@ -364,6 +364,7 @@ extern int mana_logtype_init;int mana_ring_doorbell (void *db_page,enum gdma_queue_types queue_type,uint32_t queue_id,uint32_t tail); +int mana_rq_ring_doorbell (struct mana_rxq *rxq); int gdma_post_work_request(struct mana_gdma_queue *queue, struct gdma_work_request *work_req,
@@ -379,8 +380,10 @@ uint16_t mana_tx_burst_removed(void *dpdk_rxq, struct rte_mbuf **pkts,int gdma_poll_completion_queue (struct mana_gdma_queue *cq,struct gdma_comp *comp); +int mana_start_rx_queues (struct rte_eth_dev *dev);int mana_start_tx_queues (struct rte_eth_dev *dev); +int mana_stop_rx_queues (struct rte_eth_dev *dev);int mana_stop_tx_queues (struct rte_eth_dev *dev); struct mana_mr_cache *mana_find_pmd_mr(struct mana_mr_btree *local_tree,
drivers/net/mana/meson.build +1 -0
@@ -11,6 +11,7 @@ deps += ['pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mana.c', + 'rx.c', 'tx.c', 'mr.c', 'gdma.c',
drivers/net/mana/rx.c new file +345 -0
345 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v3 14/17 net/mana: add function to receive packets
In reply to [email protected]From: Long Li <[email protected]>
With all the RX queues created, MANA can use those queues to receive packets.
---
Change log:
v2:
Add mana_ to all function names.
Rename a camel case.
doc/guides/nics/features/mana.ini | 2 + drivers/net/mana/mana.c | 2 + drivers/net/mana/mana.h | 37 +++++++++++ drivers/net/mana/mp.c | 2 + drivers/net/mana/rx.c | 104 ++++++++++++++++++++++++++++++ 5 files changed, 147 insertions(+)
doc/guides/nics/features/mana.ini +2 -0
@@ -6,6 +6,8 @@ [Features] Link status = P Linux = Y +L3 checksum offload = Y +L4 checksum offload = Y Multiprocess aware = Y Queue start/stop = Y Removal event = Y
drivers/net/mana/mana.c +2 -0
@@ -950,6 +950,8 @@ static int mana_pci_probe_mac(struct rte_pci_driver *pci_drv __rte_unused,/* fd is no not used after mapping doorbell */ close (fd); + eth_dev->rx_pkt_burst = mana_rx_burst; +rte_spinlock_lock (&mana_shared_data->lock); mana_shared_data->secondary_cnt++; mana_local_data.secondary_cnt++;
drivers/net/mana/mana.h +37 -0
@@ -178,6 +178,11 @@ struct gdma_work_request {enum mana_cqe_type {CQE_INVALID =0 , + +CQE_RX_OKAY =1 , +CQE_RX_COALESCED_4 =2 , +CQE_RX_OBJECT_FENCE =3 , +CQE_RX_TRUNCATED =4 , };struct mana_cqe_header {
@@ -203,6 +208,35 @@ struct mana_cqe_header { (NDIS_HASH_TCP_IPV4 |NDIS_HASH_UDP_IPV4 |NDIS_HASH_TCP_IPV6 | \ NDIS_HASH_UDP_IPV6 | NDIS_HASH_TCP_IPV6_EX | NDIS_HASH_UDP_IPV6_EX) +struct mana_rx_comp_per_packet_info { +uint32_t packet_length :16 ; +uint32_t reserved0 :16 ; +uint32_t reserved1; +uint32_t packet_hash; +};/* HW DATA */ +#define RX_COM_OOB_NUM_PACKETINFO_SEGMENTS 4 + +struct mana_rx_comp_oob { +struct mana_cqe_header cqe_hdr; + +uint32_t rx_vlan_id :12 ; +uint32_t rx_vlan_tag_present :1 ; +uint32_t rx_outer_ip_header_checksum_succeeded :1 ; +uint32_t rx_outer_ip_header_checksum_failed :1 ; +uint32_t reserved :1 ; +uint32_t rx_hash_type :9 ; +uint32_t rx_ip_header_checksum_succeeded :1 ; +uint32_t rx_ip_header_checksum_failed :1 ; +uint32_t rx_tcp_checksum_succeeded :1 ; +uint32_t rx_tcp_checksum_failed :1 ; +uint32_t rx_udp_checksum_succeeded :1 ; +uint32_t rx_udp_checksum_failed :1 ; +uint32_t reserved1 :1 ; +struct mana_rx_comp_per_packet_info + packet_info[RX_COM_OOB_NUM_PACKETINFO_SEGMENTS ]; +uint32_t received_wqe_offset; +};/* HW DATA */ +struct gdma_wqe_dma_oob {uint32_t reserved:24 ;uint32_t last_v_bytes:8 ;
@@ -371,6 +405,9 @@ int gdma_post_work_request(struct mana_gdma_queue *queue, struct gdma_posted_wqe_info *wqe_info);uint8_t *gdma_get_wqe_pointer (struct mana_gdma_queue *queue); +uint16_t mana_rx_burst (void *dpdk_rxq,struct rte_mbuf **rx_pkts, +uint16_t pkts_n); +uint16_t mana_rx_burst_removed (void *dpdk_rxq,struct rte_mbuf **pkts,uint16_t pkts_n);
drivers/net/mana/mp.c +2 -0
@@ -138,6 +138,8 @@ static int mana_mp_secondary_handle(const struct rte_mp_msg *mp_msg,case MANA_MP_REQ_START_RXTX :DRV_LOG (INFO ,"Port %u starting datapath" , dev->data->port_id); + dev->rx_pkt_burst = mana_rx_burst; +rte_mb (); res->result =0 ;
drivers/net/mana/rx.c +104 -0
107 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v3 15/17 net/mana: add function to send packets
In reply to [email protected]From: Long Li <[email protected]>
With all the TX queues created, MANA can send packets over those queues.
---
Change log:
v2:
Rename all camel cases.
doc/guides/nics/features/mana.ini | 1 + drivers/net/mana/mana.c | 1 + drivers/net/mana/mana.h | 65 ++++++++ drivers/net/mana/mp.c | 1 + drivers/net/mana/tx.c | 241 ++++++++++++++++++++++++++++++ 5 files changed, 309 insertions(+)
doc/guides/nics/features/mana.ini +1 -0
@@ -4,6 +4,7 @@ ; Refer to default.ini for the full list of available PMD features. ; [Features] +Free Tx mbuf on demand = Y Link status = P Linux = Y L3 checksum offload = Y
drivers/net/mana/mana.c +1 -0
@@ -950,6 +950,7 @@ static int mana_pci_probe_mac(struct rte_pci_driver *pci_drv __rte_unused,/* fd is no not used after mapping doorbell */ close (fd); + eth_dev->tx_pkt_burst = mana_tx_burst; eth_dev->rx_pkt_burst = mana_rx_burst;rte_spinlock_lock (&mana_shared_data->lock);
drivers/net/mana/mana.h +65 -0
89 lines not on this page · raw message
drivers/net/mana/mp.c +1 -0
@@ -138,6 +138,7 @@ static int mana_mp_secondary_handle(const struct rte_mp_msg *mp_msg,case MANA_MP_REQ_START_RXTX :DRV_LOG (INFO ,"Port %u starting datapath" , dev->data->port_id); + dev->tx_pkt_burst = mana_tx_burst; dev->rx_pkt_burst = mana_rx_burst;rte_mb ();
drivers/net/mana/tx.c +241 -0
244 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v3 16/17 net/mana: add function to start/stop device
In reply to [email protected]From: Long Li <[email protected]>
Add support for starting/stopping the device.
---
Change log:
v2:
Use spinlock for memory registration cache.
Add prefix mana_ to all function names.
drivers/net/mana/mana.c | 70 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+)
drivers/net/mana/mana.c +70 -0
@@ -97,6 +97,74 @@ static int mana_dev_configure(struct rte_eth_dev *dev)static int mana_intr_uninstall (struct mana_priv *priv); +static int +mana_dev_start (struct rte_eth_dev *dev) +{ +int ret; +struct mana_priv *priv = dev->data->dev_private; + +rte_spinlock_init (&priv->mr_btree_lock); + ret =mana_mr_btree_init (&priv->mr_btree,MANA_MR_BTREE_CACHE_N , + dev->device->numa_node); +if (ret) { +DRV_LOG (ERR ,"Failed to init device MR btree %d" , ret); +return ret; + } + + ret =mana_start_tx_queues (dev); +if (ret) { +DRV_LOG (ERR ,"failed to start tx queues %d" , ret); +return ret; + } + + ret =mana_start_rx_queues (dev); +if (ret) { +DRV_LOG (ERR ,"failed to start rx queues %d" , ret); +mana_stop_tx_queues (dev); +return ret; + } + +rte_wmb (); + + dev->tx_pkt_burst = mana_tx_burst; + dev->rx_pkt_burst = mana_rx_burst; + +DRV_LOG (INFO ,"TX/RX queues have started" ); + +/* Enable datapath for secondary processes */ +mana_mp_req_on_rxtx (dev,MANA_MP_REQ_START_RXTX ); + +return 0 ; +} + +static int +mana_dev_stop(struct rte_eth_dev *dev __rte_unused) +{ +int ret; + + dev->tx_pkt_burst = mana_tx_burst_removed; + dev->rx_pkt_burst = mana_rx_burst_removed; + +/* Stop datapath on secondary processes */ +mana_mp_req_on_rxtx (dev,MANA_MP_REQ_STOP_RXTX ); + +rte_wmb (); + + ret =mana_stop_tx_queues (dev); +if (ret) { +DRV_LOG (ERR ,"failed to stop tx queues" ); +return ret; + } + + ret =mana_stop_rx_queues (dev); +if (ret) { +DRV_LOG (ERR ,"failed to stop tx queues" ); +return ret; + } + +return 0 ; +} +static int mana_dev_close (struct rte_eth_dev *dev) {
@@ -435,6 +503,8 @@ static int mana_dev_link_update(struct rte_eth_dev *dev,const struct eth_dev_ops mana_dev_ops = { .dev_configure = mana_dev_configure, + .dev_start = mana_dev_start, + .dev_stop = mana_dev_stop, .dev_close = mana_dev_close, .dev_infos_get = mana_dev_info_get, .txq_info_get = mana_dev_tx_queue_info,
Signature · 1 line
2.17.1
PATCH v3 17/17 net/mana: add function to report queue stats
In reply to [email protected]From: Long Li <[email protected]>
Report packet statistics.
--- doc/guides/nics/features/mana.ini | 2 + drivers/net/mana/mana.c | 77 +++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+)
doc/guides/nics/features/mana.ini +2 -0
@@ -4,6 +4,7 @@ ; Refer to default.ini for the full list of available PMD features. ; [Features] +Basic stats = Y Free Tx mbuf on demand = Y Link status = P Linux = Y
@@ -14,5 +15,6 @@ Queue start/stop = Y Removal event = Y RSS hash = Y Speed capabilities = P +Stats per queue = Y Usage doc = Y x86-64 = Y
drivers/net/mana/mana.c +77 -0
92 lines not on this page · raw message
Signature · 1 line
2.17.1