Skip to contentSkip to conversation

Octeontx2 minor tc fixes

PATCH Applied Subbaraya Sundeep 3 participants 5 messages Jul 24, 2022 – Jul 26, 2022

Subsystems (3)
lore
Share & tools
lore

Subbaraya Sundeep

author maintainer
#0 lore raw

cover Octeontx2 minor tc fixes

This patch set fixes two problems found in tc code wrt to ratelimiting and when installing UDP/TCP filters.

Patch 1: CN10K has different register format compared to
CN9xx hence fixes that.
Patch 2: Check flow mask also before installing a src/dst
port filter, otherwise installing for one port installs for other one too.

Thanks,
Sundeep

Subbaraya Sundeep (1):
octeontx2-pf: Fix UDP/TCP src and dst port tc filters

Sunil Goutham (1):
octeontx2-pf: cn10k: Fix egress ratelimit configuration

 .../net/ethernet/marvell/octeontx2/nic/otx2_tc.c   | 106 ++++++++++++++-------
 1 file changed, 73 insertions(+), 33 deletions(-)
Signature · 1 line
2.7.4
author maintainer
#1 lore raw

PATCH 1/2 octeontx2-pf: cn10k: Fix egress ratelimit configuration

From: Sunil Goutham <[email protected]>

NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K.

Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64.

Fixes e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
---
 .../net/ethernet/marvell/octeontx2/nic/otx2_tc.c   | 76 ++++++++++++++++------
 1 file changed, 55 insertions(+), 21 deletions(-)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +55 -21
index 28b1994..fa83cf2 100644
@@ -28,6 +28,9 @@
 #define MAX_RATE_EXPONENT		0x0FULL
 #define MAX_RATE_MANTISSA		0xFFULL
 
+#define CN10K_MAX_BURST_MANTISSA	0x7FFFULL
+#define CN10K_MAX_BURST_SIZE		8453888ULL
+
 /* Bitfields in NIX_TLX_PIR register */
 #define TLX_RATE_MANTISSA		GENMASK_ULL(8, 1)
 #define TLX_RATE_EXPONENT		GENMASK_ULL(12, 9)
@@ -35,6 +38,9 @@
 #define TLX_BURST_MANTISSA		GENMASK_ULL(36, 29)
 #define TLX_BURST_EXPONENT		GENMASK_ULL(40, 37)
 
+#define CN10K_TLX_BURST_MANTISSA	GENMASK_ULL(43, 29)
+#define CN10K_TLX_BURST_EXPONENT	GENMASK_ULL(47, 44)
+
 struct otx2_tc_flow_stats {
 	u64 bytes;
 	u64 pkts;
@@ -77,33 +83,42 @@ int otx2_tc_alloc_ent_bitmap(struct otx2_nic *nic)
 }
 EXPORT_SYMBOL(otx2_tc_alloc_ent_bitmap);
 
-static void otx2_get_egress_burst_cfg(u32 burst, u32 *burst_exp,
-				      u32 *burst_mantissa)
+static void otx2_get_egress_burst_cfg(struct otx2_nic *nic, u32 burst,
+				      u32 *burst_exp, u32 *burst_mantissa)
 {
+	int max_burst, max_mantissa;
 	unsigned int tmp;
 
+	if (is_dev_otx2(nic->pdev)) {
+		max_burst = MAX_BURST_SIZE;
+		max_mantissa = MAX_BURST_MANTISSA;
+	} else {
+		max_burst = CN10K_MAX_BURST_SIZE;
+		max_mantissa = CN10K_MAX_BURST_MANTISSA;
+	}
+
 	/* Burst is calculated as
 	 * ((256 + BURST_MANTISSA) << (1 + BURST_EXPONENT)) / 256
 	 * Max supported burst size is 130,816 bytes.
 	 */
-	burst = min_t(u32, burst, MAX_BURST_SIZE);
+	burst = min_t(u32, burst, max_burst);
 	if (burst) {
 		*burst_exp = ilog2(burst) ? ilog2(burst) - 1 : 0;
 		tmp = burst - rounddown_pow_of_two(burst);
-		if (burst < MAX_BURST_MANTISSA)
+		if (burst < max_mantissa)
 			*burst_mantissa = tmp * 2;
 		else
 			*burst_mantissa = tmp / (1ULL << (*burst_exp - 7));
 	} else {
 		*burst_exp = MAX_BURST_EXPONENT;
-		*burst_mantissa = MAX_BURST_MANTISSA;
+		*burst_mantissa = max_mantissa;
 	}
 }
 
-static void otx2_get_egress_rate_cfg(u32 maxrate, u32 *exp,
+static void otx2_get_egress_rate_cfg(u64 maxrate, u32 *exp,
 				     u32 *mantissa, u32 *div_exp)
 {
-	unsigned int tmp;
+	u64 tmp;
 
 	/* Rate calculation by hardware
 	 *
@@ -132,21 +147,44 @@ static void otx2_get_egress_rate_cfg(u32 maxrate, u32 *exp,
 	}
 }
 
-static int otx2_set_matchall_egress_rate(struct otx2_nic *nic, u32 burst, u32 maxrate)
+static u64 otx2_get_txschq_rate_regval(struct otx2_nic *nic,
+				       u64 maxrate, u32 burst)
 {
-	struct otx2_hw *hw = &nic->hw;
-	struct nix_txschq_config *req;
 	u32 burst_exp, burst_mantissa;
 	u32 exp, mantissa, div_exp;
+	u64 regval = 0;
+
+	/* Get exponent and mantissa values from the desired rate */
+	otx2_get_egress_burst_cfg(nic, burst, &burst_exp, &burst_mantissa);
+	otx2_get_egress_rate_cfg(maxrate, &exp, &mantissa, &div_exp);
+
+	if (is_dev_otx2(nic->pdev)) {
+		regval = FIELD_PREP(TLX_BURST_EXPONENT, (u64)burst_exp) |
+				FIELD_PREP(TLX_BURST_MANTISSA, (u64)burst_mantissa) |
+				FIELD_PREP(TLX_RATE_DIVIDER_EXPONENT, div_exp) |
+				FIELD_PREP(TLX_RATE_EXPONENT, exp) |
+				FIELD_PREP(TLX_RATE_MANTISSA, mantissa) | BIT_ULL(0);
+	} else {
+		regval = FIELD_PREP(CN10K_TLX_BURST_EXPONENT, (u64)burst_exp) |
+				FIELD_PREP(CN10K_TLX_BURST_MANTISSA, (u64)burst_mantissa) |
+				FIELD_PREP(TLX_RATE_DIVIDER_EXPONENT, div_exp) |
+				FIELD_PREP(TLX_RATE_EXPONENT, exp) |
+				FIELD_PREP(TLX_RATE_MANTISSA, mantissa) | BIT_ULL(0);
+	}
+
+	return regval;
+}
+
+static int otx2_set_matchall_egress_rate(struct otx2_nic *nic,
+					 u32 burst, u64 maxrate)
+{
+	struct otx2_hw *hw = &nic->hw;
+	struct nix_txschq_config *req;
 	int txschq, err;
 
 	/* All SQs share the same TL4, so pick the first scheduler */
 	txschq = hw->txschq_list[NIX_TXSCH_LVL_TL4][0];
 
-	/* Get exponent and mantissa values from the desired rate */
-	otx2_get_egress_burst_cfg(burst, &burst_exp, &burst_mantissa);
-	otx2_get_egress_rate_cfg(maxrate, &exp, &mantissa, &div_exp);
-
 	mutex_lock(&nic->mbox.lock);
 	req = otx2_mbox_alloc_msg_nix_txschq_cfg(&nic->mbox);
 	if (!req) {
@@ -157,11 +195,7 @@ static int otx2_set_matchall_egress_rate(struct otx2_nic *nic, u32 burst, u32 ma
 	req->lvl = NIX_TXSCH_LVL_TL4;
 	req->num_regs = 1;
 	req->reg[0] = NIX_AF_TL4X_PIR(txschq);
-	req->regval[0] = FIELD_PREP(TLX_BURST_EXPONENT, burst_exp) |
-			 FIELD_PREP(TLX_BURST_MANTISSA, burst_mantissa) |
-			 FIELD_PREP(TLX_RATE_DIVIDER_EXPONENT, div_exp) |
-			 FIELD_PREP(TLX_RATE_EXPONENT, exp) |
-			 FIELD_PREP(TLX_RATE_MANTISSA, mantissa) | BIT_ULL(0);
+	req->regval[0] = otx2_get_txschq_rate_regval(nic, maxrate, burst);
 
 	err = otx2_sync_mbox_msg(&nic->mbox);
 	mutex_unlock(&nic->mbox.lock);
@@ -230,7 +264,7 @@ static int otx2_tc_egress_matchall_install(struct otx2_nic *nic,
 	struct netlink_ext_ack *extack = cls->common.extack;
 	struct flow_action *actions = &cls->rule->action;
 	struct flow_action_entry *entry;
-	u32 rate;
+	u64 rate;
 	int err;
 
 	err = otx2_tc_validate_flow(nic, actions, extack);
@@ -256,7 +290,7 @@ static int otx2_tc_egress_matchall_install(struct otx2_nic *nic,
 		}
 		/* Convert bytes per second to Mbps */
 		rate = entry->police.rate_bytes_ps * 8;
-		rate = max_t(u32, rate / 1000000, 1);
+		rate = max_t(u64, rate / 1000000, 1);
 		err = otx2_set_matchall_egress_rate(nic, entry->police.burst, rate);
 		if (err)
 			return err;
Signature · 1 line
2.7.4
maintainer
#2 lore raw

Re: [net PATCH 1/2] octeontx2-pf: cn10k: Fix egress ratelimit configuration

Hello,

Quoted 6 lines · Subbaraya Sundeep

From: Sunil Goutham <[email protected]>

NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K.

Quoted 6 lines

Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64.

Fixes e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")

I wrongly applied this series to net-next due to PEBKAC here. I'm going to rever it and apply to net.

I'm sorry for the confusion,

Paolo

author maintainer
#3 lore raw

PATCH 2/2 octeontx2-pf: Fix UDP/TCP src and dst port tc filters

In reply to Subbaraya Sundeep

Check the mask for non-zero value before installing tc filters for L4 source and destination ports. Otherwise installing a filter for source port installs destination port too and vice-versa.

Fixes 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
---
 .../net/ethernet/marvell/octeontx2/nic/otx2_tc.c   | 30 +++++++++++++---------
 1 file changed, 18 insertions(+), 12 deletions(-)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +18 -12
index fa83cf2..e64318c 100644
@@ -648,21 +648,27 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
 
 		flow_spec->dport = match.key->dst;
 		flow_mask->dport = match.mask->dst;
-		if (ip_proto == IPPROTO_UDP)
-			req->features |= BIT_ULL(NPC_DPORT_UDP);
-		else if (ip_proto == IPPROTO_TCP)
-			req->features |= BIT_ULL(NPC_DPORT_TCP);
-		else if (ip_proto == IPPROTO_SCTP)
-			req->features |= BIT_ULL(NPC_DPORT_SCTP);
+
+		if (flow_mask->dport) {
+			if (ip_proto == IPPROTO_UDP)
+				req->features |= BIT_ULL(NPC_DPORT_UDP);
+			else if (ip_proto == IPPROTO_TCP)
+				req->features |= BIT_ULL(NPC_DPORT_TCP);
+			else if (ip_proto == IPPROTO_SCTP)
+				req->features |= BIT_ULL(NPC_DPORT_SCTP);
+		}
 
 		flow_spec->sport = match.key->src;
 		flow_mask->sport = match.mask->src;
-		if (ip_proto == IPPROTO_UDP)
-			req->features |= BIT_ULL(NPC_SPORT_UDP);
-		else if (ip_proto == IPPROTO_TCP)
-			req->features |= BIT_ULL(NPC_SPORT_TCP);
-		else if (ip_proto == IPPROTO_SCTP)
-			req->features |= BIT_ULL(NPC_SPORT_SCTP);
+
+		if (flow_mask->sport) {
+			if (ip_proto == IPPROTO_UDP)
+				req->features |= BIT_ULL(NPC_SPORT_UDP);
+			else if (ip_proto == IPPROTO_TCP)
+				req->features |= BIT_ULL(NPC_SPORT_TCP);
+			else if (ip_proto == IPPROTO_SCTP)
+				req->features |= BIT_ULL(NPC_SPORT_SCTP);
+		}
 	}
 
 	return otx2_tc_parse_actions(nic, &rule->action, req, f, node);
Signature · 1 line
2.7.4
#4 lore raw
In reply to Subbaraya Sundeep
This series was applied to netdev/net-next.git (master) by Paolo Abeni <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (master) by Paolo Abeni <[email protected]>:

Quoted 9 lines · On Sun, 24 Jul 2022 13:51:12 +0530 you wrote:

This patch set fixes two problems found in tc code wrt to ratelimiting and when installing UDP/TCP filters.

Patch 1: CN10K has different register format compared to
CN9xx hence fixes that.
Patch 2: Check flow mask also before installing a src/dst
port filter, otherwise installing for one port installs for other one too.

[...]

Here is the summary with links:
- [net,1/2] octeontx2-pf: cn10k: Fix egress ratelimit configuration

    https://git.kernel.org/netdev/net-next/c/5ec9c514d4a0
  - [net,2/2] octeontx2-pf: Fix UDP/TCP src and dst port tc filters
    https://git.kernel.org/netdev/net-next/c/d351c90ce248

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html