gpio: pca953x: Add mutex_lock for regcache sync in PM
PATCH 1/1 gpio: pca953x: Add mutex_lock for regcache sync in PM
From: Haibo Chen <[email protected]>
The regcache sync will set the cache_bypass = true, at that time, when there is regmap write operation, it will bypass the regmap cache, then the regcache sync will write back the value from cache to register, which is not as our expectation.
Though regmap already use its internal lock to avoid such issue, but this driver force disable the regmap internal lock in its regmap config: disable_locking = true
To avoid this issue, use the driver's own lock to do the protect in system PM.
--- drivers/gpio/gpio-pca953x.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/gpio/gpio-pca953x.c +7 -1
@@ -1168,7 +1168,9 @@ static int pca953x_suspend(struct device *dev) {struct pca953x_chip *chip =dev_get_drvdata (dev); +mutex_lock (&chip->i2c_lock);regcache_cache_only (chip->regmap, true); +mutex_unlock (&chip->i2c_lock);if (atomic_read (&chip->wakeup_path))device_set_wakeup_path (dev);
@@ -1191,13 +1193,17 @@ static int pca953x_resume(struct device *dev) } } +mutex_lock (&chip->i2c_lock);regcache_cache_only (chip->regmap, false);regcache_mark_dirty (chip->regmap); ret =pca953x_regcache_sync (dev); -if (ret) +if (ret) { +mutex_unlock (&chip->i2c_lock);return ret; + } ret =regcache_sync (chip->regmap); +mutex_unlock (&chip->i2c_lock);if (ret) {dev_err (dev,"Failed to restore register map: %d\n" , ret);return ret;
Signature · 1 line
2.34.1
Quoted 55 lines · On Wed, Aug 31, 2022 at 12:55 PM <[email protected]> wrote:
From: Haibo Chen <[email protected]>
The regcache sync will set the
cache_bypass= true, at that time, when there is regmap write operation, it will bypass the regmap cache, then the regcache sync will write back the value from cache to register, which is not as our expectation.Though regmap already use its internal lock to avoid such issue, but this driver force disable the regmap internal lock in its regmap config:
disable_locking= trueTo avoid this issue, use the driver's own lock to do the protect in system PM.
Fixes b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")Signed-off-by Haibo Chen <[email protected]>--- drivers/gpio/gpio-pca953x.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)drivers/gpio/gpio-pca953x.c +7
-2@@ -1168,7 +1168,9 @@ static int pca953x_suspend(struct device *dev) {struct pca953x_chip *chip =dev_get_drvdata (dev); +mutex_lock (&chip->i2c_lock);regcache_cache_only (chip->regmap, true); +mutex_unlock (&chip->i2c_lock);if (atomic_read (&chip->wakeup_path))device_set_wakeup_path (dev);@@ -1191,13 +1193,17 @@ static int pca953x_resume(struct device *dev) } } +mutex_lock (&chip->i2c_lock);regcache_cache_only (chip->regmap, false);regcache_mark_dirty (chip->regmap); ret =pca953x_regcache_sync (dev); -if (ret) +if (ret) { +mutex_unlock (&chip->i2c_lock);return ret; + } ret =regcache_sync (chip->regmap); +mutex_unlock (&chip->i2c_lock);if (ret) {dev_err (dev,"Failed to restore register map: %d\n" , ret);return ret; --
Quoted 2 lines
2.34.1
Good catch, applied for fixes, thanks!
Bart