Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3592
PATCH 1/1 Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3592
From: Max Chou <[email protected]>
Add the support ID(0x13D3, 0x3592) to usb_device_id table for Realtek RTL8852C.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3592 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -438,6 +438,8 @@ static const struct usb_device_id blacklist_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3586), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH },/* Realtek Bluetooth devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
Signature · 1 line
2.34.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=672002
---Test result---
Test Summary:
CheckPatch PASS 1.62 seconds GitLint PASS 0.98 seconds SubjectPrefix PASS 0.88 seconds BuildKernel PASS 34.04 seconds BuildKernel32 PASS 30.25 seconds Incremental Build with patchesPASS 42.85 seconds TestRunner: Setup PASS 498.43 seconds TestRunner: l2cap-tester PASS 17.88 seconds TestRunner: bnep-tester PASS 6.85 seconds TestRunner: mgmt-tester PASS 105.02 seconds TestRunner: rfcomm-tester PASS 10.23 seconds TestRunner: sco-tester PASS 10.05 seconds TestRunner: smp-tester PASS 10.06 seconds TestRunner: userchan-tester PASS 7.04 seconds
---
Regards,
Linux Bluetooth
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 8 lines · On Mon, 29 Aug 2022 19:45:07 +0800 you wrote:
From: Max Chou <[email protected]>
Add the support
ID(0x13D3, 0x3592)tousb_device_idtable for Realtek RTL8852C.The device info from
/sys/kernel/debug/usb/devicesas below.[...]
Here is the summary with links:
- [1/1] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3592
https://git.kernel.org/bluetooth/bluetooth-next/c/c4ba5800217b
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html