FAILED: patch "[PATCH] USB: serial: ch341: fix lost character on LCR updates" failed to apply to 5.10-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 8e83622ae7ca481c76c8fd9579877f6abae64ca2 Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Wed, 31 Aug 2022 10:15:24 +0200
Subject: [PATCH] USB: serial: ch341: fix lost character on LCR updates
Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost.
Note that updating LCR using the INIT command has no effect on these devices either.
drivers/usb/serial/ch341.c +9 -1
@@ -97,7 +97,10 @@ struct ch341_private {u8 mcr;u8 msr;u8 lcr; +unsigned long quirks; +u8 version; +unsigned long break_end; };
@@ -265,6 +268,9 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev,* (stop bits, parity and word length). Version 0x30 and above use * CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero. */ +if (priv->version <0x30 ) +return 0 ; + r =ch341_control_out (dev,CH341_REQ_WRITE_REG ,CH341_REG_LCR2 <<8 |CH341_REG_LCR , lcr);if (r)
@@ -308,7 +314,9 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) r =ch341_control_in (dev,CH341_REQ_READ_VERSION ,0 ,0 , buffer, size);if (r)return r; -dev_dbg (&dev->dev,"Chip version: 0x%02x\n" , buffer[0 ]); + + priv->version = buffer[0 ]; +dev_dbg (&dev->dev,"Chip version: 0x%02x\n" , priv->version); r =ch341_control_out (dev,CH341_REQ_SERIAL_INIT ,0 ,0 );if (r <0 )