Mesh demon switched to using kernel Mesh MGMT
Subsystems (3)
cover Mesh demon switched to using kernel Mesh MGMT
This patchset enables the mesh daemon (bluetooth-meshd) to use the new MGMT mesh opcodes and events to send and receive Mesh packets. By default, the daemon attempts to enable the experimental mesh functionality, and query the kernel for active mesh support before then enumerating the available controllers and selecting ojne that works.
If no kernel support is found, it will continue to use a raw HCI socket for mesh support.
Brian Gix (4):
mgmt: Add support for Mesh in the kernel
lib: Add defines of new MGMT opcodes and events
mesh: Improve PB-ADV timing for reliability
mesh: Add new kernel MGMT based IO transport
Makefile.mesh | 9 +- doc/mgmt-api.txt | 192 +++++++++++++++++++++++++++++++++-------- lib/mgmt.h | 6 ++ mesh/main.c | 39 ++++++++- mesh/mesh-io-api.h | 11 ++- mesh/mesh-io-generic.c | 47 +++------- mesh/mesh-io-unit.c | 13 ++- mesh/mesh-io.c | 188 ++++++++++++++++++++++++++++++---------- mesh/mesh-io.h | 4 +- mesh/mesh-mgmt.c | 164 +++++++++++++++++++++++++++-------- mesh/mesh-mgmt.h | 12 ++- mesh/mesh.c | 6 +- mesh/mesh.h | 2 +- mesh/pb-adv.c | 9 +- 14 files changed, 523 insertions(+), 179 deletions(-)
Signature · 1 line
2.37.3
PATCH 1/4 mgmt: Add support for Mesh in the kernel
These commands and events allow User space apps to test for Mesh support, and request incoming mesh packets be delivered and request outbound mesh packets to be sent. This is the basis for sharing one controller between the legacy bluetoothd daemon and the mesh bluetooth-meshd daemon.
--- doc/mgmt-api.txt | 192 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 157 insertions(+), 35 deletions(-)
doc/mgmt-api.txt +157 -35
@@ -3861,45 +3861,132 @@ Add Advertisement Patterns Monitor With RSSI Threshold Command Invalid Parameters -Set Quality Report Command -========================== +Set Mesh Receiver Command +========================= Command Code: 0x0057 Controller Index: <controller id> - Command Parameters: Quality_Report (1 Octet) - Return Parameters: Current_Settings (4 Octets) + Command Parameters: Enable (1 Octets) + Window (2 Octets) + Period (2 Octets) + Num AD Types (1 Octets) + AD Types { } - This command is used to enable and disable the controller's quality - report feature. The allowed values for the Quality_Report command - parameter are 0x00 and 0x01. All other values will return Invalid - Parameters. + This command Enables or Disables Mesh Receiving. When enabled passive + scanning remains enabled for this controller. + + The Window/Period values are used to set the Scan Parameters when no + other scanning is being done. + + Num AD Types and AD Types parameter, filter Advertising and Scan + responses by AD type. Reponses that do not contain at least one of the + requested AD types will be ignored. Otherwise they will be delivered + with the Mesh Device Found event. + + Possible errors: Failed + No Resources + Invalid Parameters + + +Read Mesh Features Command +========================== + + Command Code: 0x0058 + Controller Index: <controller id> + Command Parameters: + Return Parameters: Index (2 Octets) + Max Handles (1 Octets) + Used Handles (1 Octets) + Handle { } - The value 0x00 disables the Quality Report, and the value 0x01 - enables the Quality Report feature. + This command is used to both verify that Outbound Mesh packet + support is enabled, and to indicate the number of packets that + can and are simultaneously queued. - This command is only available for the controllers that support - either AOSP Bluetooth quality report or Intel telemetry event. - It is supported if the supported_settings indicate support for it. + Index identifies the HCI Controller that this information is valid for. - This command requires to use a valid controller index. Otherwise, - an Invalid Index status will be returned. + Max Handles indicates the maximum number of packets that may be queued. - The command is sent to the controller to enable/disable the quality - report feature, and generates a Command Complete event on success. - If the controller failed to execute the action, a Failed status will - be returned. + Used Handles indicates the number of packets awaiting transmission. - The quality report state is maintained by the kernel over the adapter - power cycle. When the adapter is powered off, the quality report - feature is disabled by the kernel. When the adapter is powered on, it - is enabled again by the kernel if it was enabled before. + Handle is an array of the currently outstanding packets. Possible errors: Failed - Invalid Index + No Resources Invalid Parameters - Not Supported +Transmit Mesh Packet Command +============================ + + Command Code: 0x0059 + Controller Index: <controller id> + Command Parameters: Addr (6 octets) + Addr Type (1 Octets) + Instant (8 Octets) + Delay (2 Octets) + Count (1 Octets) + Data Length (1 Octets) + Data (variable) + + Return Parameters: Handle (1 Octets) + + This command sends a Mesh Packet as a NONCONN LE Advertisement. + + The Addr + Addr Type parameters specifify the address to use in the + outbound advertising packet. If BD_ADDR_ANY and LE_RANDOM is set, the + kernel will create a single use non-resolvable address. + + The Instant parameter is used in combination with the Delay + parameter, to finely time the sending of the Advertising packet. It + should be set to the Instant value tag of a received incoming + Mesh Device Found Event. It is only useful in POLL-RESPONSE situations + where a response must be sent within a negotiated time window. The value + of the Instant parameter should not be interpreted by the host, and + only has meaning to the controller. + + The Delay parameter, if 0x0000, will cause the packet to be sent + at the earliest opportunity. If non-Zero, and the controller supports + delayed delivery, the Instant and Delay parameters will be used + to delay the outbound packet. While the Instant is not defined, the + Delay is specified in milliseconds. + + The Count parameter must be sent to a non-Zero value indicating the + number of times this packet will be sent before transmission completes. + If the Delay parameter is non-Zero, then Count must be 1 only. + + The Data parameter is an octet array of the AD Type and Mesh Packet. + + This command will return immediately, and if it succeeds, will generate + a Mesh Packet Transmission Complete event when after the packet has been + sent. + + Possible errors: Failed + Busy + No Resources + Invalid Parameters + + +Cancel Transmit Mesh Packet Command +=================================== + + Command Code: 0x005A + Controller Index: <controller id> + Command Parameters: Handle (1 Octets) + + This command may be used to cancel an outbound transmission request. + + The Handle parameter is the returned handle from a successful Transmit + Mesh Packet request. If Zero is specified as the handle, all outstanding + send requests are canceled. + + For each mesh packet canceled, the Mesh Packet Transmission Complete + event will be generated, regardless of whether the packet was sent + successfully. + + Possible errors: Failed + Invalid Parameters + Command Complete Event ======================
@@ -5022,20 +5109,55 @@ Advertisement Monitor Device Lost Event This event will be sent to all management sockets. -Quality Report Event -==================== +Mesh Device Found Event +======================= Event code: 0x0031 Controller Index: <controller_id> - Event Parameters: Quality_Spec (1 Octet) - Report_Len (2 Octets) - Report (0-65535 Octets) + Event Parameters: Address (6 Octets) + Address_Type (1 Octet) + RSSI (1 Octet) + Instant (8 Octets) + Flags (4 Octets) + AD_Data_Length (2 Octets) + AD_Data (0-65535 Octets) - This event carries the Bluetooth quality report sent by the - controller. + This event indicates that the controller has received an Advertisement + or Scan Result containing an AD Type matching the Mesh scan set. + + The address of the sending device is returned, and must be a valid LE + Address_Type. + + Possible values for the Address_Type parameter: + 0 Reserved (not in use) + 1 LE Public + 2 LE Random + + The RSSI field is a signed octet, and is the RSSI reported by the + receiving controller. + + The Instant field is 64 bit value that represents the instant in time + the packet was received. It's value is not intended to be interpretted + by the host, and is only useful if the host wants to make a timed + response to the received packet. (i.e. a Poll/Response) + + AD_Length and AD_Data contains the Info structure of Advertising and + Scan rsults. To receive this event, AD filters must be requested with + the Set Mesh Receiver command command, specifying which AD Types to + return. All AD structures will be received in this event if any of the + filtered AD Types are present. + + This event will be sent to all management sockets. + + +Mesh Packet Transmit Complete Event +=================================== + + Event code: 0x0032 + Controller Index: <controller_id> + Event Parameters: Handle (1 Octets) - Possible values for the Quality_Spec parameter: - 0 AOSP Bluetooth Quality Report Event - 1 Intel Telemetry Event + This event indicates that a requested outbound Mesh packet has + completed and no longer occupies a transmit slot. This event will be sent to all management sockets.
Signature · 1 line
2.37.3
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=679601
---Test result---
Test Summary:
CheckPatch FAIL 6.13 seconds GitLint PASS 3.99 seconds Prep - Setup ELL PASS 27.65 seconds Build - Prep PASS 0.86 seconds Build - Configure PASS 9.01 seconds Build - Make FAIL 111.00 seconds Make Check FAIL 1136.95 seconds Make Check w/Valgrind FAIL 85.66 seconds Make Distcheck FAIL 11.62 seconds Build w/ext ELL - Configure PASS 8.98 seconds Build w/ext ELL - Make FAIL 39.83 seconds Incremental Build w/ patches FAIL 354.58 seconds Scan Build FAIL 633.10 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script with rule in .checkpatch.conf Output:
[BlueZ,1/4] mgmt: Add support for Mesh in the kernel WARNING:REPEATED_WORD: Possible repeated word: 'command' #282: FILE: doc/mgmt-api.txt:5146:
+ the Set Mesh Receiver command command, specifying which AD Types to
/github/workspace/src/12985789.patch total: 0 errors, 1 warnings, 222 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/12985789.patch has style problems, please review.
NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
[BlueZ,3/4] mesh: Improve PB-ADV timing for reliability WARNING:TYPO_SPELLING: 'dependant' may be misspelled - perhaps 'dependent'? #66:
Because provisioning is not speed dependant, Timing on outbound PB-ADV
^^^^^^^^^
/github/workspace/src/12985788.patch total: 0 errors, 1 warnings, 33 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/12985788.patch has style problems, please review.
NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
[BlueZ,4/4] mesh: Add new kernel MGMT based IO transport WARNING:LEADING_SPACE: please, no spaces at the start of a line #698: FILE: mesh/mesh-mgmt.c:36:
+ 0x76, 0x6e, 0xf3, 0xe8, 0x24, 0x5f, 0x05, 0xbf, /* UUID - Mesh */$
WARNING:LEADING_SPACE: please, no spaces at the start of a line #699: FILE: mesh/mesh-mgmt.c:37:
+ 0x8d, 0x4d, 0x03, 0x7a, 0xd7, 0x63, 0xe4, 0x2c,$
WARNING:LEADING_SPACE: please, no spaces at the start of a line #700: FILE: mesh/mesh-mgmt.c:38:
+ 0x01, /* Action - enable */$
/github/workspace/src/12985790.patch total: 0 errors, 3 warnings, 806 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/12985790.patch has style problems, please review.
NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: Build - Make - FAIL
Desc: Build the BlueZ source tree
Output:tools/mgmt-tester.c: In function ‘main’:tools/mgmt-tester.c:12470:5: note: variable tracking size limit exceeded with ‘-fvar-tracking-assignments’, retrying without 12470 | int main(int argc, char *argv[])
| ^~~~
mesh/mesh-io.c:27:10: fatal error: mesh/mesh-io-mgmt.h: No such file or directory
27 | #include "mesh/mesh-io-mgmt.h"
| ^~~~~~~~~~~~~~~~~~~~~compilation terminated.
make[1]: *** [Makefile:7491: mesh/mesh-io.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:4451: all] Error 2
##############################
Test: Make Check - FAIL
Desc: Run 'make check'
Output:unit/test-avdtp.c: In function ‘main’:unit/test-avdtp.c:766:5: note: variable tracking size limit exceeded with ‘-fvar-tracking-assignments’, retrying without
766 | int main(int argc, char *argv[])
| ^~~~
unit/test-avrcp.c: In function ‘main’:
unit/test-avrcp.c:989:5: note: variable tracking size limit exceeded with ‘-fvar-tracking-assignments’, retrying without
989 | int main(int argc, char *argv[])
| ^~~~
mesh/mesh-io.c:27:10: fatal error: mesh/mesh-io-mgmt.h: No such file or directory
27 | #include "mesh/mesh-io-mgmt.h"
| ^~~~~~~~~~~~~~~~~~~~~compilation terminated.
make[1]: *** [Makefile:7491: mesh/mesh-io.o] Error 1
make: *** [Makefile:11588: check] Error 2
##############################
Test: Make Check w/Valgrind - FAIL
Desc: Run 'make check' with Valgrind
Output:tools/mgmt-tester.c: In function ‘main’:tools/mgmt-tester.c:12470:5: note: variable tracking size limit exceeded with ‘-fvar-tracking-assignments’, retrying without 12470 | int main(int argc, char *argv[])
| ^~~~
mesh/mesh-io.c:27:10: fatal error: mesh/mesh-io-mgmt.h: No such file or directory
27 | #include "mesh/mesh-io-mgmt.h"
| ^~~~~~~~~~~~~~~~~~~~~compilation terminated.
make[1]: *** [Makefile:7491: mesh/mesh-io.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:4451: all] Error 2
##############################
Test: Make Distcheck - FAIL
Desc: Run distcheck to check the distribution
Output:
make[2]: *** No rule to make target 'mesh/mesh-io-mgmt.h', needed by 'distdir-am'. Stop. make[1]: *** [Makefile:11421: distdir] Error 2
make: *** [Makefile:11497: dist] Error 2
##############################
Test: Build w/ext ELL - Make - FAIL
Desc: Build BlueZ source with '--enable-external-ell' configuration Output:mesh/mesh-io.c:27:10: fatal error: mesh/mesh-io-mgmt.h: No such file or directory
27 | #include "mesh/mesh-io-mgmt.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [Makefile:7491: mesh/mesh-io.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:4451: all] Error 2
##############################
Test: Incremental Build w/ patches - FAIL
Desc: Incremental build per patch in the series
Output:mesh/mesh-io.c:27:10: fatal error: mesh/mesh-io-mgmt.h: No such file or directory
27 | #include "mesh/mesh-io-mgmt.h"
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [Makefile:7491: mesh/mesh-io.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:4451: all] Error 2
##############################
Test: Scan Build - FAIL
Desc: Run Scan Build with patches
Output:tools/btpclient.c:2494:3: warning: Value stored to 'reply' is never read
reply = l_dbus_message_new_error(ag.pending_req,
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
In file included from unit/test-mesh-crypto.c:20:
In file included from ./mesh/crypto.c:18:
In file included from ./ell/ell.h:1:./ell/util.h:187:9: warning: 1st function call argument is an uninitialized value
return L_BE32_TO_CPU(L_GET_UNALIGNED((const uint32_t *) ptr));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./ell/util.h:89:28: note: expanded from macro 'L_BE32_TO_CPU'
#define L_BE32_TO_CPU(val) bswap_32(val)
^~~~~~~~~~~~~
/usr/include/byteswap.h:34:21: note: expanded from macro 'bswap_32'
#define bswap_32(x) __bswap_32 (x)
^~~~~~~~~~~~~~
unit/test-mesh-crypto.c:965:11: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage
key_aid |= KEY_ID_AKF;
~~~~~~~ ^
unit/test-mesh-crypto.c:1008:2: warning: 4th function call argument is an uninitialized value
verify_uint8("NID", 0, keys->net_nid, nid);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
unit/test-mesh-crypto.c:1289:6: warning: Branch condition evaluates to a garbage value
if (ctl) {
^~~
unit/test-mesh-crypto.c:1509:7: warning: Branch condition evaluates to a garbage value
if (net_ctl) {
^~~~~~~
unit/test-mesh-crypto.c:1763:2: warning: 1st function call argument is an uninitialized value
l_put_be64(cmac_tmp, cmac);
^~~~~~~~~~~~~~~~~~~~~~~~~~
6 warnings generated.
src/advertising.c:898:2: warning: Null pointer passed to 2nd parameter expecting 'nonnull'
memcpy(cp->data + adv_data_len, scan_rsp, scan_rsp_len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
mesh/mesh-io.c:27:10: fatal error: mesh/mesh-io-mgmt.h: No such file or directory
27 | #include "mesh/mesh-io-mgmt.h"
| ^~~~~~~~~~~~~~~~~~~~~compilation terminated.
make[1]: *** [Makefile:7491: mesh/mesh-io.o] Error 1
make: *** [Makefile:4451: all] Error 2
---
Regards,
Linux Bluetooth
PATCH 2/4 lib: Add defines of new MGMT opcodes and events
In reply to Brian GixPopulated new opcodes and events into static mgmt_ev and mgmt_op string arrays.
--- lib/mgmt.h | 6 ++++++ 1 file changed, 6 insertions(+)
lib/mgmt.h +6 -0
@@ -1170,6 +1170,10 @@ static const char *mgmt_op[] = {"Add Extended Advertisement Parameters" ,/* 0x0054 */ "Add Extended Advertisement Data" ,"Add Advertisement Patterns Monitor RSSI" , +"Set Mesh Receiver" , +"Read Mesh Features" , +"Mesh Send" , + "Mesh Send Cancel", }; static const char *mgmt_ev[] = {
@@ -1222,6 +1226,8 @@ static const char *mgmt_ev[] = {"Controller Resume" ,"Advertisement Monitor Device Found" ,/* 0x002f */ "Advertisement Monitor Device Lost" , +"Mesh Packet Found" , + "Mesh Packet Complete", }; static const char *mgmt_status[] = {
Signature · 1 line
2.37.3
PATCH 3/4 mesh: Improve PB-ADV timing for reliability
In reply to Brian GixBecause provisioning is not speed dependant, Timing on outbound PB-ADV packets have been modified to be less likely missed by remote controlers with looser timing capabilities.
--- mesh/pb-adv.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
mesh/pb-adv.c +6 -3
@@ -23,6 +23,8 @@#include "mesh/provision.h" #include "mesh/pb-adv.h" +#include "mesh/util.h" +struct pb_adv_session {mesh_prov_open_func_t open_cb;
@@ -158,7 +160,7 @@ static void send_adv_segs(struct pb_adv_session *session, const uint8_t *data,l_debug ("max_seg: %2.2x" , max_seg);l_debug ("size: %2.2x, CRC: %2.2x" , size, buf[9 ]); -pb_adv_send (session,MESH_IO_TX_COUNT_UNLIMITED ,200 , +pb_adv_send (session,MESH_IO_TX_COUNT_UNLIMITED ,500 , buf, init_size +10 ); consumed = init_size;
@@ -174,7 +176,7 @@ static void send_adv_segs(struct pb_adv_session *session, const uint8_t *data, buf[6 ] = (i <<2 ) |0x02 ;memcpy (buf +7 , data + consumed, seg_size); -pb_adv_send (session,MESH_IO_TX_COUNT_UNLIMITED ,200 , +pb_adv_send (session,MESH_IO_TX_COUNT_UNLIMITED ,500 , buf, seg_size +7 ); consumed += seg_size;
@@ -270,7 +272,8 @@ static void send_ack(struct pb_adv_session *session, uint8_t trans_num) ack.trans_num = trans_num; ack.opcode =PB_ADV_ACK ; -pb_adv_send (session,1 ,100 , &ack,sizeof (ack)); +pb_adv_send (session,MESH_IO_TX_COUNT_UNLIMITED ,500 , + &ack,sizeof (ack)); }static void send_close_ind (struct pb_adv_session *session,uint8_t reason)
Signature · 1 line
2.37.3
PATCH 4/4 mesh: Add new kernel MGMT based IO transport
In reply to Brian Gix1. Re-structures MGMT handling such that it is used to detect kernel support of the mesh MGMT opcodes and events before selecting between using MGMT or the legacy raw HCI socket method.
2. Re-structures main() to allow command line to prefer MGMT over HCI or visa versa, plus optionally pass an explicte controller.
3. Adds mesh-io-mgmt as a transport.
--- Makefile.mesh | 9 +- mesh/main.c | 39 ++++++++- mesh/mesh-io-api.h | 11 ++- mesh/mesh-io-generic.c | 47 +++-------- mesh/mesh-io-unit.c | 13 ++- mesh/mesh-io.c | 188 ++++++++++++++++++++++++++++++----------- mesh/mesh-io.h | 4 +- mesh/mesh-mgmt.c | 164 +++++++++++++++++++++++++++-------- mesh/mesh-mgmt.h | 12 ++- mesh/mesh.c | 6 +- mesh/mesh.h | 2 +- 11 files changed, 354 insertions(+), 141 deletions(-)
Makefile.mesh +4 -5
@@ -13,12 +13,11 @@ endif mesh_sources = mesh/mesh.h mesh/mesh.c \ mesh/net-keys.h mesh/net-keys.c \ mesh/mesh-io.h mesh/mesh-io.c \ - mesh/mesh-mgmt.c mesh/mesh-mgmt.h \ + mesh/mesh-mgmt.h mesh/mesh-mgmt.c \ mesh/error.h mesh/mesh-io-api.h \ - mesh/mesh-io-generic.h \ - mesh/mesh-io-generic.c \ - mesh/mesh-io-unit.h \ - mesh/mesh-io-unit.c \ + mesh/mesh-io-unit.h mesh/mesh-io-unit.c \ + mesh/mesh-io-mgmt.h mesh/mesh-io-mgmt.c \ + mesh/mesh-io-generic.h mesh/mesh-io-generic.c \ mesh/net.h mesh/net.c \ mesh/crypto.h mesh/crypto.c \ mesh/friend.h mesh/friend.c \
mesh/main.c +35 -4
@@ -123,6 +123,12 @@ static void disconnect_callback(void *user_data)l_main_quit (); } +static void kill_to (struct l_timeout *timeout,void *user_data) +{ +l_timeout_remove (timeout); +l_main_quit (); +} +static void signal_handler (uint32_t signo,void *user_data) {static bool terminated;
@@ -131,13 +137,38 @@ static void signal_handler(uint32_t signo, void *user_data)return ;l_info ("Terminating" ); -l_main_quit (); +mesh_cleanup (true); +l_timeout_create (1 , kill_to,NULL ,NULL ); terminated = true; }static bool parse_io (const char *optarg,enum mesh_io_type *type,void **opts) { -if (strstr (optarg,"generic" ) == optarg) { +if (strstr (optarg,"auto" ) == optarg) { +int *index =l_new (int,1 ); + + *type =MESH_IO_TYPE_AUTO ; + *opts = index; + + optarg +=strlen ("auto" ); +if (!*optarg) { + *index =MGMT_INDEX_NONE ; +return true; + } + +if (*optarg !=':' ) +return false; + + optarg++; + +if (sscanf (optarg,"hci%d" , index) ==1 ) +return true; + +if (sscanf (optarg,"%d" , index) ==1 ) +return true; + +return false; + }else if (strstr (optarg,"generic" ) == optarg) {int *index =l_new (int,1 ); *type =MESH_IO_TYPE_GENERIC ;
@@ -251,7 +282,7 @@ int main(int argc, char *argv[]) }if (!io) - io =l_strdup_printf ("generic" ); + io =l_strdup_printf ("auto" );if (!parse_io (io, &io_type, &io_opts)) {l_error ("Invalid io: %s" , io);
@@ -295,7 +326,7 @@ done:l_free (io);l_free (io_opts); -mesh_cleanup (); +mesh_cleanup (false);l_dbus_destroy (dbus);l_main_exit ();
mesh/mesh-io-api.h +7 -4
@@ -10,8 +10,7 @@struct mesh_io_private ; -typedef bool (*mesh_io_init_t )(struct mesh_io *io,void *opts, -mesh_io_ready_func_t cb,void *user_data); +typedef bool (*mesh_io_init_t )(struct mesh_io *io,void *opts,void *user_data);typedef bool (*mesh_io_destroy_t )(struct mesh_io *io);typedef bool (*mesh_io_caps_t )(struct mesh_io *io,struct mesh_io_caps *caps); typedef bool (*mesh_io_send_t)(struct mesh_io *io,
@@ -36,9 +35,13 @@ struct mesh_io_api { };struct mesh_io { -enum mesh_io_type type; -const struct mesh_io_api *api; +int index; +int favored_index; +mesh_io_ready_func_t ready; +struct l_queue *rx_regs;struct mesh_io_private *pvt; +void *user_data; +const struct mesh_io_api *api; };struct mesh_io_table {
mesh/mesh-io-generic.c +11 -36
94 lines not on this page · raw message
mesh/mesh-io-unit.c +6 -7
@@ -25,13 +25,13 @@#include "mesh/dbus.h" #include "mesh/mesh-io.h" #include "mesh/mesh-io-api.h" -#include "mesh/mesh-io-generic.h" +#include "mesh/mesh-io-unit.h" struct mesh_io_private { +struct mesh_io *io;struct l_io *sio;void *user_data;char *unique_name; -mesh_io_ready_func_t ready_callback;struct l_timeout *tx_timeout;struct l_queue *rx_regs;struct l_queue *tx_pkts;
@@ -203,14 +203,13 @@ static void unit_up(void *user_data)l_debug ("Started io-unit" ); -if (pvt->ready_callback) - pvt->ready_callback (pvt->user_data, true); +if (pvt->io && pvt->io->ready) + pvt->io->ready (pvt->user_data, true);l_timeout_create_ms (1 , get_name, pvt,NULL ); } -static bool unit_init (struct mesh_io *io,void *opt, -mesh_io_ready_func_t cb,void *user_data) +static bool unit_init (struct mesh_io *io,void *opt,void *user_data) {struct mesh_io_private *pvt;char *sk_path;
@@ -247,7 +246,7 @@ static bool unit_init(struct mesh_io *io, void *opt, pvt->rx_regs =l_queue_new (); pvt->tx_pkts =l_queue_new (); - pvt->ready_callback = cb; + pvt->io = io; pvt->user_data = user_data; io->pvt = pvt;
mesh/mesh-io.c +141 -47
270 lines not on this page · raw message
mesh/mesh-io.h +3 -1
@@ -14,8 +14,10 @@ struct mesh_io;enum mesh_io_type {MESH_IO_TYPE_NONE =0 , +MESH_IO_TYPE_UNIT_TEST , +MESH_IO_TYPE_AUTO ,/* If MGMT required, add after here */ +MESH_IO_TYPE_MGMT ,MESH_IO_TYPE_GENERIC , -MESH_IO_TYPE_UNIT_TEST };enum mesh_io_timing_type {
mesh/mesh-mgmt.c +130 -34
242 lines not on this page · raw message
mesh/mesh-mgmt.h +11 -1
@@ -9,6 +9,16 @@*/ #include <stdbool.h> -typedef void (*mesh_mgmt_read_info_func_t )(int index,void *user_data); +typedef void (*mesh_mgmt_read_info_func_t )(int index,bool added,bool powered, +bool mesh,void *user_data);bool mesh_mgmt_list (mesh_mgmt_read_info_func_t cb,void *user_data); +unsigned int mesh_mgmt_send (uint16_t opcode,uint16_t index, +uint16_t length,const void *param, +mgmt_request_func_t callback, +void *user_data,mgmt_destroy_func_t destroy); +unsigned int mesh_mgmt_register (uint16_t event,uint16_t index, +mgmt_notify_func_t callback, +void *user_data,mgmt_destroy_func_t destroy); +bool mesh_mgmt_unregister (unsigned int id); +void mesh_mgmt_destroy (void );
mesh/mesh.c +5 -1
@@ -324,11 +324,15 @@ static void free_pending_join_call(bool failed) join_pending =NULL ; } -void mesh_cleanup (void ) +void mesh_cleanup (bool signaled) {struct l_dbus_message *reply;mesh_io_destroy (mesh.io); + mesh.io =NULL ; + +if (signaled) +return ;if (join_pending) {
mesh/mesh.h +1 -1
@@ -28,7 +28,7 @@ typedef void (*prov_rx_cb_t)(void *user_data, const uint8_t *data,bool mesh_init (const char *config_dir,const char *mesh_conf_fname,enum mesh_io_type type,void *opts,mesh_ready_func_t cb,void *user_data); -void mesh_cleanup (void ); +void mesh_cleanup (bool signaled);bool mesh_dbus_init (struct l_dbus *dbus);const char *mesh_status_str (uint8_t err);
Signature · 1 line
2.37.3
This series was applied to bluetooth/bluez.git (master) by Brian Gix <[email protected]>:
Hello:
This series was applied to bluetooth/bluez.git (master) by Brian Gix <[email protected]>:
Quoted 10 lines · On Thu, 22 Sep 2022 13:38:48 -0700 you wrote:
This patchset enables the mesh daemon (bluetooth-meshd) to use the new MGMT mesh opcodes and events to send and receive Mesh packets. By default, the daemon attempts to enable the experimental mesh functionality, and query the kernel for active mesh support before then enumerating the available controllers and selecting ojne that works.
If no kernel support is found, it will continue to use a raw HCI socket for mesh support.
[...]
Here is the summary with links:
- [BlueZ,1/4] mgmt: Add support for Mesh in the kernel
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=0454e2d09570 - [BlueZ,2/4] lib: Add defines of new MGMT opcodes and events https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=721d5a8ae86d
- [BlueZ,3/4] mesh: Improve PB-ADV timing for reliability (no matching commit)
- [BlueZ,4/4] mesh: Add new kernel MGMT based IO transport (no matching commit)
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html