Skip to contentSkip to conversation

libsas and drivers: NCQ error handling

PATCH Applied John Garry 4 participants 17 messages Oct 17, 2022 – Oct 22, 2022

Subsystems (4)
lore
Share & tools
lore

John Garry

author
#0 lore raw

v6 cover libsas and drivers: NCQ error handling

As reported in [0], the pm8001 driver NCQ error handling more or less duplicates what libata does in link error handling, as follows:
- abort all commands
- do autopsy with read log ext 10 command
- reset the target to recover, if necessary

Indeed for the hisi_sas driver we want to add similar handling for NCQ errors.

This series add a new libsas API - sas_ata_device_link_abort() - to handle host NCQ errors, and fixes up pm8001 and hisi_sas drivers to use it.

A difference in the pm8001 driver NCQ error handling is that we send SATA_ABORT per-task prior to read log ext10, but I feel that this should not make a difference to the error handling.

Finally with these changes we can make the libsas task alloc/free APIs private, which they should always have been.

Based on v6.1-rc1

[0] https://lore.kernel.org/linux-scsi/[email protected]/

Changes since v5:
- Change to set ATA_DRDY in sata dev fis for sas_ata_device_link_abort() and sas_ata_task_done()
- Add Niklas' tags (thanks!)
- Rebase

Changes since v4:
- Add Jason's tags (thanks)
- Rebase

Changes since v3:
- Add Damien's tags (thanks)
- Modify hisi_sas processing as follows:
- use sas_task_abort() for rejected IO
- Modify abort task processing to issue softreset in certain circumstances
- rebase

Changes since v2:
- Stop sending SATA_ABORT all for pm8001 handling
- Make "reset" optional in sas_ata_device_link_abort()
- Drop Jack's ACK

John Garry (6):
scsi: libsas: Add sas_ata_device_link_abort()
scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()
scsi: pm8001: Modify task abort handling for SATA task
scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors
scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private
scsi: libsas: Update SATA dev FIS in sas_ata_task_done()

Xingui Yang (2):
scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw
scsi: hisi_sas: Modify v3 HW SATA disk error state completion
processing

 drivers/scsi/hisi_sas/hisi_sas.h       |   1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  26 +++-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |  53 ++++++-
 drivers/scsi/libsas/sas_ata.c          |  19 ++-
 drivers/scsi/libsas/sas_init.c         |   3 -
 drivers/scsi/libsas/sas_internal.h     |   4 +
 drivers/scsi/pm8001/pm8001_hwi.c       | 186 ++++---------------------
 drivers/scsi/pm8001/pm8001_sas.c       |  14 +-
 drivers/scsi/pm8001/pm8001_sas.h       |   5 -
 drivers/scsi/pm8001/pm80xx_hwi.c       | 177 +++--------------------
 include/scsi/libsas.h                  |   4 -
 include/scsi/sas_ata.h                 |   6 +
 12 files changed, 148 insertions(+), 350 deletions(-)
Signature · 1 line
2.35.3
author
#1 lore raw

PATCH v6 1/8 scsi: libsas: Add sas_ata_device_link_abort()

Similar to how AHCI handles NCQ errors in ahci_error_intr() -> ata_port_abort() -> ata_do_link_abort(), add an NCQ error handler for LLDDs to call to initiate a link abort.

This will mark all outstanding QCs as failed and kick-off EH.

Note:
A "force reset" argument is added for drivers which require the ATA error handling to always reset the device.

A driver may require this feature for when SATA device per-SCSI cmnd resources are only released during reset for ATA EH. As such, we need an option to force reset to be done, regardless of what any EH autopsy decides.

The SATA device FIS fields are set to indicate a device error from ata_eh_analyze_tf().

---
 drivers/scsi/libsas/sas_ata.c | 15 +++++++++++++++
 include/scsi/sas_ata.h        |  6 ++++++
 2 files changed, 21 insertions(+)
drivers/scsi/libsas/sas_ata.c +15 -0
index d35c9296f738..61f64d54e67d 100644
@@ -861,6 +861,21 @@ void sas_ata_wait_eh(struct domain_device *dev)
 	ata_port_wait_eh(ap);
 }
 
+void sas_ata_device_link_abort(struct domain_device *device, bool force_reset)
+{
+	struct ata_port *ap = device->sata_dev.ap;
+	struct ata_link *link = &ap->link;
+
+	device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY; /* tf status */
+	device->sata_dev.fis[3] = ATA_ABORTED; /* tf error */
+
+	link->eh_info.err_mask |= AC_ERR_DEV;
+	if (force_reset)
+		link->eh_info.action |= ATA_EH_RESET;
+	ata_link_abort(link);
+}
+EXPORT_SYMBOL_GPL(sas_ata_device_link_abort);
+
 int sas_execute_ata_cmd(struct domain_device *device, u8 *fis, int force_phy_id)
 {
 	struct sas_tmf_task tmf_task = {};
include/scsi/sas_ata.h +6 -0
index a1df4f9d57a3..e47f0aec0722 100644
@@ -32,6 +32,7 @@ void sas_probe_sata(struct asd_sas_port *port);
 void sas_suspend_sata(struct asd_sas_port *port);
 void sas_resume_sata(struct asd_sas_port *port);
 void sas_ata_end_eh(struct ata_port *ap);
+void sas_ata_device_link_abort(struct domain_device *dev, bool force_reset);
 int sas_execute_ata_cmd(struct domain_device *device, u8 *fis,
 			int force_phy_id);
 int sas_ata_wait_after_reset(struct domain_device *dev, unsigned long deadline);
@@ -87,6 +88,11 @@ static inline void sas_ata_end_eh(struct ata_port *ap)
 {
 }
 
+static inline void sas_ata_device_link_abort(struct domain_device *dev,
+					     bool force_reset)
+{
+}
+
 static inline int sas_execute_ata_cmd(struct domain_device *device, u8 *fis,
 				      int force_phy_id)
 {
Signature · 1 line
2.35.3
#2 lore raw

Re: [PATCH v6 1/8] scsi: libsas: Add sas_ata_device_link_abort()

Quoted 15 lines · John Garry

Similar to how AHCI handles NCQ errors in ahci_error_intr() -> ata_port_abort() -> ata_do_link_abort(), add an NCQ error handler for LLDDs to call to initiate a link abort.

This will mark all outstanding QCs as failed and kick-off EH.

Note:
A "force reset" argument is added for drivers which require the ATA error handling to always reset the device.

A driver may require this feature for when SATA device per-SCSI cmnd resources are only released during reset for ATA EH. As such, we need an option to force reset to be done, regardless of what any EH autopsy decides.

Quoted 5 lines

The SATA device FIS fields are set to indicate a device error from ata_eh_analyze_tf().

Nit: is this perhaps a typo?
(Since there is another Tested-by tag later in the list.)

Checkpatch doesn't complain, so I guess no biggie, but might be worth fixing if you decide to roll a v7.

Kind regards,
Niklas

Quoted 4 lines
author
#3 lore raw

Re: [PATCH v6 1/8] scsi: libsas: Add sas_ata_device_link_abort()

Quoted 6 lines · Niklas Cassel
Quoted 5 lines

The SATA device FIS fields are set to indicate a device error from ata_eh_analyze_tf().

Nit: is this perhaps a typo?

Yeah, a copy and paste error.

Quoted 4 lines

(Since there is another Tested-by tag later in the list.)

Checkpatch doesn't complain, so I guess no biggie, but might be worth fixing if you decide to roll a v7.

Sure

Thanks,
John

author
#4 lore raw

PATCH v6 2/8 scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()

In reply to John Garry

Each branch currently defines a slot variable independently, and it is neater to move it to the function head.

---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/scsi/hisi_sas/hisi_sas_main.c +3 -5
index 699b07abb6b0..8303aa5eaf25 100644
@@ -1547,6 +1547,7 @@ static int hisi_sas_abort_task(struct sas_task *task)
 	struct hisi_sas_internal_abort_data internal_abort_data = { false };
 	struct domain_device *device = task->dev;
 	struct hisi_sas_device *sas_dev = device->lldd_dev;
+	struct hisi_sas_slot *slot = task->lldd_task;
 	struct hisi_hba *hisi_hba;
 	struct device *dev;
 	int rc = TMF_RESP_FUNC_FAILED;
@@ -1560,7 +1561,6 @@ static int hisi_sas_abort_task(struct sas_task *task)
 
 	spin_lock_irqsave(&task->task_state_lock, flags);
 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
-		struct hisi_sas_slot *slot = task->lldd_task;
 		struct hisi_sas_cq *cq;
 
 		if (slot) {
@@ -1578,8 +1578,7 @@ static int hisi_sas_abort_task(struct sas_task *task)
 	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
 
-	if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
-		struct hisi_sas_slot *slot = task->lldd_task;
+	if (slot && task->task_proto & SAS_PROTOCOL_SSP) {
 		u16 tag = slot->idx;
 		int rc2;
 
@@ -1613,9 +1612,8 @@ static int hisi_sas_abort_task(struct sas_task *task)
 			hisi_sas_dereg_device(hisi_hba, device);
 			rc = hisi_sas_softreset_ata_disk(device);
 		}
-	} else if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SMP) {
+	} else if (slot && task->task_proto & SAS_PROTOCOL_SMP) {
 		/* SMP */
-		struct hisi_sas_slot *slot = task->lldd_task;
 		u32 tag = slot->idx;
 		struct hisi_sas_cq *cq = &hisi_hba->cq[slot->dlvry_queue];
 
Signature · 1 line
2.35.3
author
#5 lore raw

PATCH v6 3/8 scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw

In reply to John Garry

From: Xingui Yang <[email protected]>

When CQ header dw3 SATA_DISK_ERR is set it means this SATA disk is in error state and the current IPTT is invalid. An invalid IPTT does not correspond to any slot.

In this scenario, new I/Os that delivered to disk will be rejected by the controller and all I/Os remaining in the disk should be aborted, which we add here with the sas_ata_device_link_abort() call.

In hisi_sas_abort_task() we don't want to issue a softreset as it may cause info to be lost in the target disk for the ATA EH autopsy. In this case, just release resources - the disk won't return other I/Os normally after NCQ Error, so this is safe.

---
 drivers/scsi/hisi_sas/hisi_sas.h       |  1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 18 +++++++++-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 48 ++++++++++++++++++++++++--
 3 files changed, 64 insertions(+), 3 deletions(-)
drivers/scsi/hisi_sas/hisi_sas.h +1 -0
index 9aebf4a26b13..6f8a52a1b808 100644
@@ -104,6 +104,7 @@ enum {
 enum dev_status {
 	HISI_SAS_DEV_INIT,
 	HISI_SAS_DEV_NORMAL,
+	HISI_SAS_DEV_NCQ_ERR,
 };
 
 enum {
drivers/scsi/hisi_sas/hisi_sas_main.c +17 -1
index 8303aa5eaf25..4c37ae9eb6b6 100644
@@ -1604,13 +1604,26 @@ static int hisi_sas_abort_task(struct sas_task *task)
 	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
 		task->task_proto & SAS_PROTOCOL_STP) {
 		if (task->dev->dev_type == SAS_SATA_DEV) {
+			struct ata_queued_cmd *qc = task->uldd_task;
+
 			rc = hisi_sas_internal_task_abort_dev(sas_dev, false);
 			if (rc < 0) {
 				dev_err(dev, "abort task: internal abort failed\n");
 				goto out;
 			}
 			hisi_sas_dereg_device(hisi_hba, device);
-			rc = hisi_sas_softreset_ata_disk(device);
+
+			/*
+			 * If an ATA internal command times out in ATA EH, it
+			 * need to execute soft reset, so check the scsicmd
+			 */
+			if ((sas_dev->dev_status == HISI_SAS_DEV_NCQ_ERR) &&
+			    qc && qc->scsicmd) {
+				hisi_sas_do_release_task(hisi_hba, task, slot);
+				rc = TMF_RESP_FUNC_COMPLETE;
+			} else {
+				rc = hisi_sas_softreset_ata_disk(device);
+			}
 		}
 	} else if (slot && task->task_proto & SAS_PROTOCOL_SMP) {
 		/* SMP */
@@ -1727,6 +1740,9 @@ static int hisi_sas_I_T_nexus_reset(struct domain_device *device)
 	struct device *dev = hisi_hba->dev;
 	int rc;
 
+	if (sas_dev->dev_status == HISI_SAS_DEV_NCQ_ERR)
+		sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+
 	rc = hisi_sas_internal_task_abort_dev(sas_dev, false);
 	if (rc < 0) {
 		dev_err(dev, "I_T nexus reset: internal abort (%d)\n", rc);
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +46 -2

80 lines not on this page · raw message

Signature · 1 line
2.35.3
author
#6 lore raw

PATCH v6 4/8 scsi: hisi_sas: Modify v3 HW SATA disk error state completion processing

In reply to John Garry

From: Xingui Yang <[email protected]>

When an NCQ error occurs, the controller will abnormally complete the I/Os that are newly delivered to disk, and bit8 in CQ dw3 will be set which indicates that the SATA disk is in error state. The current processing flow is to set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will set FIS stat to ATA_ERR. After analyzing the IO by ata_eh_analyze_tf(), err_mask will set to AC_ERR_HSM. If media error occurs for four times within 10 minutes and the chip rejects new I/Os for four times, NCQ will be disabled due to excessive errors, which is undesirable.

Therefore, use sas_task_abort() to handle abnormally completed I/Os when SATA disk is in error state, as these abnormally completed I/Os are already processed by sas_ata_device_link_abort() and qc->flag are set to ATA_QCFLAG_FAILED. If sas_task_abort() is used, qc->err_mask will not be modified in EH. Unlike the current process flow, it will not increase the count of ECAT_TOUT_HSM and not turn off NCQ. Like other I/Os on the disk that do not have an error but do not return after the NCQ error, they are retried after the EH.

---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +4 -1
index 0ae8a60aaf93..0c3fcb807806 100644
@@ -428,6 +428,8 @@
 #define CMPLT_HDR_DEV_ID_OFF		16
 #define CMPLT_HDR_DEV_ID_MSK		(0xffff << CMPLT_HDR_DEV_ID_OFF)
 /* dw3 */
+#define SATA_DISK_IN_ERROR_STATUS_OFF	8
+#define SATA_DISK_IN_ERROR_STATUS_MSK	(0x1 << SATA_DISK_IN_ERROR_STATUS_OFF)
 #define CMPLT_HDR_SATA_DISK_ERR_OFF	16
 #define CMPLT_HDR_SATA_DISK_ERR_MSK	(0x1 << CMPLT_HDR_SATA_DISK_ERR_OFF)
 #define CMPLT_HDR_IO_IN_TARGET_OFF	17
@@ -2219,7 +2221,8 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 		} else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
 			ts->residual = trans_tx_fail_type;
 			ts->stat = SAS_DATA_UNDERRUN;
-		} else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
+		} else if ((dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) ||
+			   (dw3 & SATA_DISK_IN_ERROR_STATUS_MSK)) {
 			ts->stat = SAS_PHY_DOWN;
 			slot->abort = 1;
 		} else {
Signature · 1 line
2.35.3
#7 lore raw

Re: [PATCH v6 4/8] scsi: hisi_sas: Modify v3 HW SATA disk error state completion processing

Quoted 10 lines · John Garry

From: Xingui Yang <[email protected]>

When an NCQ error occurs, the controller will abnormally complete the I/Os that are newly delivered to disk, and bit8 in CQ dw3 will be set which indicates that the SATA disk is in error state. The current processing flow is to set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will set FIS stat to ATA_ERR. After analyzing the IO by ata_eh_analyze_tf(), err_mask will set to AC_ERR_HSM. If media error occurs for four times within 10 minutes and the chip rejects new I/Os for four times, NCQ will be disabled due to excessive errors, which is undesirable.

With patch 8/8 in this series, will it still set err_mask to AC_ERR_HSM? If not, is this patch still needed with patch 8/8?

Kind regards,
Niklas

Quoted 42 lines

Therefore, use sas_task_abort() to handle abnormally completed I/Os when SATA disk is in error state, as these abnormally completed I/Os are already processed by sas_ata_device_link_abort() and qc->flag are set to ATA_QCFLAG_FAILED. If sas_task_abort() is used, qc->err_mask will not be modified in EH. Unlike the current process flow, it will not increase the count of ECAT_TOUT_HSM and not turn off NCQ. Like other I/Os on the disk that do not have an error but do not return after the NCQ error, they are retried after the EH.

---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +4 -1
index 0ae8a60aaf93..0c3fcb807806 100644
@@ -428,6 +428,8 @@
 #define CMPLT_HDR_DEV_ID_OFF		16
 #define CMPLT_HDR_DEV_ID_MSK		(0xffff << CMPLT_HDR_DEV_ID_OFF)
 /* dw3 */
+#define SATA_DISK_IN_ERROR_STATUS_OFF	8
+#define SATA_DISK_IN_ERROR_STATUS_MSK	(0x1 << SATA_DISK_IN_ERROR_STATUS_OFF)
 #define CMPLT_HDR_SATA_DISK_ERR_OFF	16
 #define CMPLT_HDR_SATA_DISK_ERR_MSK	(0x1 << CMPLT_HDR_SATA_DISK_ERR_OFF)
 #define CMPLT_HDR_IO_IN_TARGET_OFF	17
@@ -2219,7 +2221,8 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 		} else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
 			ts->residual = trans_tx_fail_type;
 			ts->stat = SAS_DATA_UNDERRUN;
-		} else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
+		} else if ((dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) ||
+			   (dw3 & SATA_DISK_IN_ERROR_STATUS_MSK)) {
 			ts->stat = SAS_PHY_DOWN;
 			slot->abort = 1;
 		} else {
Signature · 1 line
2.35.3
author
#8 lore raw

Re: [PATCH v6 4/8] scsi: hisi_sas: Modify v3 HW SATA disk error state completion processing

Quoted 11 lines · Niklas Cassel
Quoted 10 lines · John Garry

From: Xingui Yang<[email protected]>

When an NCQ error occurs, the controller will abnormally complete the I/Os that are newly delivered to disk, and bit8 in CQ dw3 will be set which indicates that the SATA disk is in error state. The current processing flow is to set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will set FIS stat to ATA_ERR. After analyzing the IO by ata_eh_analyze_tf(), err_mask will set to AC_ERR_HSM. If media error occurs for four times within 10 minutes and the chip rejects new I/Os for four times, NCQ will be disabled due to excessive errors, which is undesirable.

Quoted 3 lines

With patch 8/8 in this series, will it still set err_mask to AC_ERR_HSM? If not, is this patch still needed with patch 8/8?

I spoke to colleague Xingui Yang and he does not think that it is still required. But I was leaving it in as it still looked like a sensible change. I suppose I can drop it.

Thanks,
John

author
#9 lore raw

PATCH v6 5/8 scsi: pm8001: Modify task abort handling for SATA task

In reply to John Garry

When we try to abort a SATA task, the CCB of the task which we are trying to avoid may still complete. In this case, we should not touch the task associated with that CCB as we can race with libsas freeing the last later in sas_eh_handle_sas_errors() -> sas_eh_finish_cmd() for when TASK_IS_ABORTED is returned from sas_scsi_find_task()

---
 drivers/scsi/pm8001/pm8001_hwi.c | 15 +++++++++++++--
 drivers/scsi/pm8001/pm8001_sas.c |  8 ++++++++
 drivers/scsi/pm8001/pm80xx_hwi.c | 14 ++++++++++----
 3 files changed, 31 insertions(+), 6 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +13 -2
index 628b08ba6770..c0adc3a9d196 100644
@@ -2295,7 +2295,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		if (t->dev && (t->dev->lldd_dev))
 			pm8001_dev = t->dev->lldd_dev;
 	} else {
-		pm8001_dbg(pm8001_ha, FAIL, "task null\n");
+		pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+			   ccb->ccb_tag);
+		pm8001_ccb_free(pm8001_ha, ccb);
 		return;
 	}
 
@@ -2675,8 +2677,17 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	pm8001_dev = ccb->device;
 	if (event)
 		pm8001_dbg(pm8001_ha, FAIL, "sata IO status 0x%x\n", event);
-	if (unlikely(!t || !t->lldd_task || !t->dev))
+
+	if (unlikely(!t)) {
+		pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+			   ccb->ccb_tag);
+		pm8001_ccb_free(pm8001_ha, ccb);
 		return;
+	}
+
+	if (unlikely(!t->lldd_task || !t->dev))
+		return;
+
 	ts = &t->task_status;
 	pm8001_dbg(pm8001_ha, DEVIO,
 		   "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
drivers/scsi/pm8001/pm8001_sas.c +8 -0
index 8e3f2f9ddaac..d5ec29f69be3 100644
@@ -983,6 +983,7 @@ int pm8001_query_task(struct sas_task *task)
 /*  mandatory SAM-3, still need free task/ccb info, abort the specified task */
 int pm8001_abort_task(struct sas_task *task)
 {
+	struct pm8001_ccb_info *ccb = task->lldd_task;
 	unsigned long flags;
 	u32 tag;
 	struct domain_device *dev ;
@@ -1113,6 +1114,13 @@ int pm8001_abort_task(struct sas_task *task)
 				pm8001_dev, DS_OPERATIONAL);
 			wait_for_completion(&completion);
 		} else {
+			/*
+			 * Ensure that if we see a completion for the ccb
+			 * associated with the task which we are trying to
+			 * abort then we should not touch the sas_task as it
+			 * may race with libsas freeing it when return here.
+			 */
+			ccb->task = NULL;
 			ret = sas_execute_internal_abort_single(dev, tag, 0, NULL);
 		}
 		rc = TMF_RESP_FUNC_COMPLETE;
drivers/scsi/pm8001/pm80xx_hwi.c +10 -4
index f8b8624458f7..dd0e06983cd3 100644
@@ -2396,7 +2396,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
 		if (t->dev && (t->dev->lldd_dev))
 			pm8001_dev = t->dev->lldd_dev;
 	} else {
-		pm8001_dbg(pm8001_ha, FAIL, "task null\n");
+		pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+			   ccb->ccb_tag);
+		pm8001_ccb_free(pm8001_ha, ccb);
 		return;
 	}
 
@@ -2813,12 +2815,16 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
 	ccb = &pm8001_ha->ccb_info[tag];
 	t = ccb->task;
 	pm8001_dev = ccb->device;
-
-	if (unlikely(!t || !t->lldd_task || !t->dev)) {
-		pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
+	if (unlikely(!t)) {
+		pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+			   ccb->ccb_tag);
+		pm8001_ccb_free(pm8001_ha, ccb);
 		return;
 	}
 
+	if (unlikely(!t->lldd_task || !t->dev))
+		return;
+
 	ts = &t->task_status;
 	pm8001_dbg(pm8001_ha, IOERR, "port_id:0x%x, tag:0x%x, event:0x%x\n",
 		   port_id, tag, event);
Signature · 1 line
2.35.3
author
#10 lore raw

PATCH v6 6/8 scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors

In reply to John Garry

In commit c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") the driver had support added to handle NCQ errors but much of what is done in this handling is duplicated from the libata EH.

In that named commit we handle in 2x main steps:
a. Issue read log ext10 to examine and clear the errors b. Issue SATA_ABORT all command

Indeed, in libata EH, we do similar to above:
a. ata_do_eh() -> ata_eh_autopsy() -> ata_eh_link_autopsy() ->
ata_eh_analyze_ncq_error() -> ata_eh_read_log_10h()
b. ata_do_eh() -> ata_eh_recover() which will issue a device soft reset
or hard reset

Since there is so much duplication, use sas_ata_device_link_abort() which will abort all pending IOs and kick of ATA EH which will do the steps, above.

However we will not follow the advisory to send the SATA_ABORT all command after the autopsy in read log ext10. Indeed, in libsas EH, we already send a per-task SATA_ABORT command, and this is prior to the ATA EH kicking in and issuing the read log ext10 in the recovery process. I judge that this is ok as the SATA_ABORT command does not actually send any protocol on the link to abort IO on the other side, so would not change any state on the disk (for the read log ext10 command).

---
 drivers/scsi/pm8001/pm8001_hwi.c | 171 +++----------------------------
 drivers/scsi/pm8001/pm8001_sas.c |   6 --
 drivers/scsi/pm8001/pm8001_sas.h |   5 -
 drivers/scsi/pm8001/pm80xx_hwi.c | 163 ++---------------------------
 4 files changed, 19 insertions(+), 326 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +13 -158
index c0adc3a9d196..ec1a9ab61814 100644
@@ -1724,7 +1724,14 @@ void pm8001_work_fn(struct work_struct *work)
 				pm8001_free_dev(pm8001_dev);
 			}
 		}
-	}	break;
+	}
+	break;
+	case IO_XFER_ERROR_ABORTED_NCQ_MODE:
+	{
+		dev = pm8001_dev->sas_device;
+		sas_ata_device_link_abort(dev, false);
+	}
+	break;
 	}
 	kfree(pw);
 }
@@ -1748,110 +1755,6 @@ int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
 	return ret;
 }
 
-static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
-		struct pm8001_device *pm8001_ha_dev)
-{
-	struct pm8001_ccb_info *ccb;
-	struct sas_task *task;
-	struct task_abort_req task_abort;
-	u32 opc = OPC_INB_SATA_ABORT;
-	int ret;
-
-	pm8001_ha_dev->id |= NCQ_ABORT_ALL_FLAG;
-	pm8001_ha_dev->id &= ~NCQ_READ_LOG_FLAG;
-
-	task = sas_alloc_slow_task(GFP_ATOMIC);
-	if (!task) {
-		pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
-		return;
-	}
-
-	task->task_done = pm8001_task_done;
-
-	ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-	if (!ccb) {
-		sas_free_task(task);
-		return;
-	}
-
-	memset(&task_abort, 0, sizeof(task_abort));
-	task_abort.abort_all = cpu_to_le32(1);
-	task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	task_abort.tag = cpu_to_le32(ccb->ccb_tag);
-
-	ret = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &task_abort,
-				   sizeof(task_abort), 0);
-	if (ret) {
-		sas_free_task(task);
-		pm8001_ccb_free(pm8001_ha, ccb);
-	}
-}
-
-static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
-		struct pm8001_device *pm8001_ha_dev)
-{
-	struct sata_start_req sata_cmd;
-	int res;
-	struct pm8001_ccb_info *ccb;
-	struct sas_task *task = NULL;
-	struct host_to_dev_fis fis;
-	struct domain_device *dev;
-	u32 opc = OPC_INB_SATA_HOST_OPSTART;
-
-	task = sas_alloc_slow_task(GFP_ATOMIC);
-	if (!task) {
-		pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
-		return;
-	}
-	task->task_done = pm8001_task_done;
-
-	/*
-	 * Allocate domain device by ourselves as libsas is not going to
-	 * provide any.
-	 */
-	dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
-	if (!dev) {
-		sas_free_task(task);
-		pm8001_dbg(pm8001_ha, FAIL,
-			   "Domain device cannot be allocated\n");
-		return;
-	}
-	task->dev = dev;
-	task->dev->lldd_dev = pm8001_ha_dev;
-
-	ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-	if (!ccb) {
-		sas_free_task(task);
-		kfree(dev);
-		return;
-	}
-
-	pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
-	pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
-
-	/* construct read log FIS */
-	memset(&fis, 0, sizeof(struct host_to_dev_fis));
-	fis.fis_type = 0x27;
-	fis.flags = 0x80;
-	fis.command = ATA_CMD_READ_LOG_EXT;
-	fis.lbal = 0x10;
-	fis.sector_count = 0x1;
-
-	memset(&sata_cmd, 0, sizeof(sata_cmd));
-	sata_cmd.tag = cpu_to_le32(ccb->ccb_tag);
-	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	sata_cmd.ncqtag_atap_dir_m = cpu_to_le32((0x1 << 7) | (0x5 << 9));
-	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
-
-	res = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
-				   sizeof(sata_cmd), 0);
-	if (res) {
-		sas_free_task(task);
-		pm8001_ccb_free(pm8001_ha, ccb);
-		kfree(dev);
-	}
-}
-
 /**
  * mpi_ssp_completion- process the event that FW response to the SSP request.
  * @pm8001_ha: our hba card information
@@ -2301,8 +2204,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		return;
 	}
 
-	if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
-		&& unlikely(!t || !t->lldd_task || !t->dev)) {
+	if (pm8001_dev && unlikely(!t || !t->lldd_task || !t->dev)) {
 		pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
 		return;
 	}
@@ -2360,15 +2262,6 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		if (param == 0) {
 			ts->resp = SAS_TASK_COMPLETE;
 			ts->stat = SAS_SAM_STAT_GOOD;
-			/* check if response is for SEND READ LOG */
-			if (pm8001_dev &&
-			    (pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
-				pm8001_send_abort_all(pm8001_ha, pm8001_dev);
-				/* Free the tag */
-				pm8001_tag_free(pm8001_ha, tag);
-				sas_free_task(t);
-				return;
-			}
 		} else {
 			u8 len;
 			ts->resp = SAS_TASK_COMPLETE;
@@ -2666,9 +2559,10 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
 		/* find device using device id */
 		pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
-		/* send read log extension */
 		if (pm8001_dev)
-			pm8001_send_read_log(pm8001_ha, pm8001_dev);
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_XFER_ERROR_ABORTED_NCQ_MODE);
 		return;
 	}
 
@@ -3649,12 +3543,7 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	pm8001_ccb_task_free(pm8001_ha, ccb);
 	mb();
 
-	if (pm8001_dev->id & NCQ_ABORT_ALL_FLAG) {
-		sas_free_task(t);
-		pm8001_dev->id &= ~NCQ_ABORT_ALL_FLAG;
-	} else {
-		t->task_done(t);
-	}
+	t->task_done(t);
 
 	return 0;
 }
@@ -4206,7 +4095,6 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	u64 phys_addr;
 	u32 ATAP = 0x0;
 	u32 dir;
-	unsigned long flags;
 	u32  opc = OPC_INB_SATA_HOST_OPSTART;
 
 	memset(&sata_cmd, 0, sizeof(sata_cmd));
@@ -4261,39 +4149,6 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 		sata_cmd.esgl = 0;
 	}
 
-	/* Check for read log for failed drive and return */
-	if (sata_cmd.sata_fis.command == 0x2f) {
-		if (((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
-			(pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
-			(pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
-			struct task_status_struct *ts;
-
-			pm8001_ha_dev->id &= 0xDFFFFFFF;
-			ts = &task->task_status;
-
-			spin_lock_irqsave(&task->task_state_lock, flags);
-			ts->resp = SAS_TASK_COMPLETE;
-			ts->stat = SAS_SAM_STAT_GOOD;
-			task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-			task->task_state_flags |= SAS_TASK_STATE_DONE;
-			if (unlikely((task->task_state_flags &
-					SAS_TASK_STATE_ABORTED))) {
-				spin_unlock_irqrestore(&task->task_state_lock,
-							flags);
-				pm8001_dbg(pm8001_ha, FAIL,
-					   "task 0x%p resp 0x%x  stat 0x%x but aborted by upper layer\n",
-					   task, ts->resp,
-					   ts->stat);
-				pm8001_ccb_task_free(pm8001_ha, ccb);
-			} else {
-				spin_unlock_irqrestore(&task->task_state_lock,
-							flags);
-				pm8001_ccb_task_free_done(pm8001_ha, ccb);
-				return 0;
-			}
-		}
-	}
-
 	return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
 				    sizeof(sata_cmd), 0);
 }
drivers/scsi/pm8001/pm8001_sas.c +0 -6
index d5ec29f69be3..2d84ae95a1f9 100644
@@ -687,12 +687,6 @@ int pm8001_dev_found(struct domain_device *dev)
 	return pm8001_dev_found_notify(dev);
 }
 
-void pm8001_task_done(struct sas_task *task)
-{
-	del_timer(&task->slow_task->timer);
-	complete(&task->slow_task->completion);
-}
-
 #define PM8001_TASK_TIMEOUT 20
 
 /**
drivers/scsi/pm8001/pm8001_sas.h +0 -5
index b08f52673889..16a753d5e8a7 100644
@@ -579,10 +579,6 @@ struct pm8001_fw_image_header {
 #define FLASH_UPDATE_DNLD_NOT_SUPPORTED		0x10
 #define FLASH_UPDATE_DISABLED			0x11
 
-#define	NCQ_READ_LOG_FLAG			0x80000000
-#define	NCQ_ABORT_ALL_FLAG			0x40000000
-#define	NCQ_2ND_RLE_FLAG			0x20000000
-
 /* Device states */
 #define DS_OPERATIONAL				0x01
 #define DS_PORT_IN_RESET			0x02
@@ -709,7 +705,6 @@ int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
 int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha, void *piomb);
 int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
 struct sas_task *pm8001_alloc_task(void);
-void pm8001_task_done(struct sas_task *task);
 void pm8001_free_task(struct sas_task *task);
 void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag);
 struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
drivers/scsi/pm8001/pm80xx_hwi.c +6 -157

201 lines not on this page · raw message

Signature · 1 line
2.35.3
Acked-by on v6 6/8
#11 lore raw

Re: [PATCH v6 6/8] scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors

Quoted 27 lines · John Garry

In commit c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") the driver had support added to handle NCQ errors but much of what is done in this handling is duplicated from the libata EH.

In that named commit we handle in 2x main steps:
a. Issue read log ext10 to examine and clear the errors b. Issue SATA_ABORT all command

Indeed, in libata EH, we do similar to above:
a. ata_do_eh() -> ata_eh_autopsy() -> ata_eh_link_autopsy() ->
ata_eh_analyze_ncq_error() -> ata_eh_read_log_10h()
b. ata_do_eh() -> ata_eh_recover() which will issue a device soft reset
or hard reset

Since there is so much duplication, use sas_ata_device_link_abort() which will abort all pending IOs and kick of ATA EH which will do the steps, above.

However we will not follow the advisory to send the SATA_ABORT all command after the autopsy in read log ext10. Indeed, in libsas EH, we already send a per-task SATA_ABORT command, and this is prior to the ATA EH kicking in and issuing the read log ext10 in the recovery process. I judge that this is ok as the SATA_ABORT command does not actually send any protocol on the link to abort IO on the other side, so would not change any state on the disk (for the read log ext10 command).

Quoted 3 lines

Reuse ata helper is nice.

Quoted 493 lines
---
 drivers/scsi/pm8001/pm8001_hwi.c | 171 +++----------------------------
 drivers/scsi/pm8001/pm8001_sas.c |   6 --
 drivers/scsi/pm8001/pm8001_sas.h |   5 -
 drivers/scsi/pm8001/pm80xx_hwi.c | 163 ++---------------------------
 4 files changed, 19 insertions(+), 326 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +13 -158
index c0adc3a9d196..ec1a9ab61814 100644
@@ -1724,7 +1724,14 @@ void pm8001_work_fn(struct work_struct *work)
                                pm8001_free_dev(pm8001_dev);
                        }
                }
-       }       break;
+       }
+       break;
+       case IO_XFER_ERROR_ABORTED_NCQ_MODE:
+       {
+               dev = pm8001_dev->sas_device;
+               sas_ata_device_link_abort(dev, false);
+       }
+       break;
        }
        kfree(pw);
 }
@@ -1748,110 +1755,6 @@ int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
        return ret;
 }
 
-static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
-               struct pm8001_device *pm8001_ha_dev)
-{
-       struct pm8001_ccb_info *ccb;
-       struct sas_task *task;
-       struct task_abort_req task_abort;
-       u32 opc = OPC_INB_SATA_ABORT;
-       int ret;
-
-       pm8001_ha_dev->id |= NCQ_ABORT_ALL_FLAG;
-       pm8001_ha_dev->id &= ~NCQ_READ_LOG_FLAG;
-
-       task = sas_alloc_slow_task(GFP_ATOMIC);
-       if (!task) {
-               pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
-               return;
-       }
-
-       task->task_done = pm8001_task_done;
-
-       ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-       if (!ccb) {
-               sas_free_task(task);
-               return;
-       }
-
-       memset(&task_abort, 0, sizeof(task_abort));
-       task_abort.abort_all = cpu_to_le32(1);
-       task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-       task_abort.tag = cpu_to_le32(ccb->ccb_tag);
-
-       ret = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &task_abort,
-                                  sizeof(task_abort), 0);
-       if (ret) {
-               sas_free_task(task);
-               pm8001_ccb_free(pm8001_ha, ccb);
-       }
-}
-
-static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
-               struct pm8001_device *pm8001_ha_dev)
-{
-       struct sata_start_req sata_cmd;
-       int res;
-       struct pm8001_ccb_info *ccb;
-       struct sas_task *task = NULL;
-       struct host_to_dev_fis fis;
-       struct domain_device *dev;
-       u32 opc = OPC_INB_SATA_HOST_OPSTART;
-
-       task = sas_alloc_slow_task(GFP_ATOMIC);
-       if (!task) {
-               pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
-               return;
-       }
-       task->task_done = pm8001_task_done;
-
-       /*
-        * Allocate domain device by ourselves as libsas is not going to
-        * provide any.
-        */
-       dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
-       if (!dev) {
-               sas_free_task(task);
-               pm8001_dbg(pm8001_ha, FAIL,
-                          "Domain device cannot be allocated\n");
-               return;
-       }
-       task->dev = dev;
-       task->dev->lldd_dev = pm8001_ha_dev;
-
-       ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-       if (!ccb) {
-               sas_free_task(task);
-               kfree(dev);
-               return;
-       }
-
-       pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
-       pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
-
-       /* construct read log FIS */
-       memset(&fis, 0, sizeof(struct host_to_dev_fis));
-       fis.fis_type = 0x27;
-       fis.flags = 0x80;
-       fis.command = ATA_CMD_READ_LOG_EXT;
-       fis.lbal = 0x10;
-       fis.sector_count = 0x1;
-
-       memset(&sata_cmd, 0, sizeof(sata_cmd));
-       sata_cmd.tag = cpu_to_le32(ccb->ccb_tag);
-       sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-       sata_cmd.ncqtag_atap_dir_m = cpu_to_le32((0x1 << 7) | (0x5 << 9));
-       memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
-
-       res = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
-                                  sizeof(sata_cmd), 0);
-       if (res) {
-               sas_free_task(task);
-               pm8001_ccb_free(pm8001_ha, ccb);
-               kfree(dev);
-       }
-}
-
 /**
  * mpi_ssp_completion- process the event that FW response to the SSP request.
  * @pm8001_ha: our hba card information
@@ -2301,8 +2204,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
                return;
        }
 
-       if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
-               && unlikely(!t || !t->lldd_task || !t->dev)) {
+       if (pm8001_dev && unlikely(!t || !t->lldd_task || !t->dev)) {
                pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
                return;
        }
@@ -2360,15 +2262,6 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
                if (param == 0) {
                        ts->resp = SAS_TASK_COMPLETE;
                        ts->stat = SAS_SAM_STAT_GOOD;
-                       /* check if response is for SEND READ LOG */
-                       if (pm8001_dev &&
-                           (pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
-                               pm8001_send_abort_all(pm8001_ha, pm8001_dev);
-                               /* Free the tag */
-                               pm8001_tag_free(pm8001_ha, tag);
-                               sas_free_task(t);
-                               return;
-                       }
                } else {
                        u8 len;
                        ts->resp = SAS_TASK_COMPLETE;
@@ -2666,9 +2559,10 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
        if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
                /* find device using device id */
                pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
-               /* send read log extension */
                if (pm8001_dev)
-                       pm8001_send_read_log(pm8001_ha, pm8001_dev);
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_XFER_ERROR_ABORTED_NCQ_MODE);
                return;
        }
 
@@ -3649,12 +3543,7 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
        pm8001_ccb_task_free(pm8001_ha, ccb);
        mb();
 
-       if (pm8001_dev->id & NCQ_ABORT_ALL_FLAG) {
-               sas_free_task(t);
-               pm8001_dev->id &= ~NCQ_ABORT_ALL_FLAG;
-       } else {
-               t->task_done(t);
-       }
+       t->task_done(t);
 
        return 0;
 }
@@ -4206,7 +4095,6 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
        u64 phys_addr;
        u32 ATAP = 0x0;
        u32 dir;
-       unsigned long flags;
        u32  opc = OPC_INB_SATA_HOST_OPSTART;
 
        memset(&sata_cmd, 0, sizeof(sata_cmd));
@@ -4261,39 +4149,6 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
                sata_cmd.esgl = 0;
        }
 
-       /* Check for read log for failed drive and return */
-       if (sata_cmd.sata_fis.command == 0x2f) {
-               if (((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
-                       (pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
-                       (pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
-                       struct task_status_struct *ts;
-
-                       pm8001_ha_dev->id &= 0xDFFFFFFF;
-                       ts = &task->task_status;
-
-                       spin_lock_irqsave(&task->task_state_lock, flags);
-                       ts->resp = SAS_TASK_COMPLETE;
-                       ts->stat = SAS_SAM_STAT_GOOD;
-                       task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-                       task->task_state_flags |= SAS_TASK_STATE_DONE;
-                       if (unlikely((task->task_state_flags &
-                                       SAS_TASK_STATE_ABORTED))) {
-                               spin_unlock_irqrestore(&task->task_state_lock,
-                                                       flags);
-                               pm8001_dbg(pm8001_ha, FAIL,
-                                          "task 0x%p resp 0x%x  stat 0x%x but aborted by upper layer\n",
-                                          task, ts->resp,
-                                          ts->stat);
-                               pm8001_ccb_task_free(pm8001_ha, ccb);
-                       } else {
-                               spin_unlock_irqrestore(&task->task_state_lock,
-                                                       flags);
-                               pm8001_ccb_task_free_done(pm8001_ha, ccb);
-                               return 0;
-                       }
-               }
-       }
-
        return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
                                    sizeof(sata_cmd), 0);
 }
drivers/scsi/pm8001/pm8001_sas.c +0 -6
index d5ec29f69be3..2d84ae95a1f9 100644
@@ -687,12 +687,6 @@ int pm8001_dev_found(struct domain_device *dev)
        return pm8001_dev_found_notify(dev);
 }
 
-void pm8001_task_done(struct sas_task *task)
-{
-       del_timer(&task->slow_task->timer);
-       complete(&task->slow_task->completion);
-}
-
 #define PM8001_TASK_TIMEOUT 20
 
 /**
drivers/scsi/pm8001/pm8001_sas.h +0 -5
index b08f52673889..16a753d5e8a7 100644
@@ -579,10 +579,6 @@ struct pm8001_fw_image_header {
 #define FLASH_UPDATE_DNLD_NOT_SUPPORTED                0x10
 #define FLASH_UPDATE_DISABLED                  0x11
 
-#define        NCQ_READ_LOG_FLAG                       0x80000000
-#define        NCQ_ABORT_ALL_FLAG                      0x40000000
-#define        NCQ_2ND_RLE_FLAG                        0x20000000
-
 /* Device states */
 #define DS_OPERATIONAL                         0x01
 #define DS_PORT_IN_RESET                       0x02
@@ -709,7 +705,6 @@ int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
 int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha, void *piomb);
 int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
 struct sas_task *pm8001_alloc_task(void);
-void pm8001_task_done(struct sas_task *task);
 void pm8001_free_task(struct sas_task *task);
 void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag);
 struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
drivers/scsi/pm8001/pm80xx_hwi.c +6 -158
index dd0e06983cd3..4484c498bcb6 100644
@@ -1778,113 +1778,6 @@ pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
        pm80xx_chip_intx_interrupt_disable(pm8001_ha);
 }
 
-static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
-               struct pm8001_device *pm8001_ha_dev)
-{
-       struct pm8001_ccb_info *ccb;
-       struct sas_task *task;
-       struct task_abort_req task_abort;
-       u32 opc = OPC_INB_SATA_ABORT;
-       int ret;
-
-       pm8001_ha_dev->id |= NCQ_ABORT_ALL_FLAG;
-       pm8001_ha_dev->id &= ~NCQ_READ_LOG_FLAG;
-
-       task = sas_alloc_slow_task(GFP_ATOMIC);
-       if (!task) {
-               pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
-               return;
-       }
-       task->task_done = pm8001_task_done;
-
-       ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-       if (!ccb) {
-               sas_free_task(task);
-               return;
-       }
-
-       memset(&task_abort, 0, sizeof(task_abort));
-       task_abort.abort_all = cpu_to_le32(1);
-       task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-       task_abort.tag = cpu_to_le32(ccb->ccb_tag);
-
-       ret = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &task_abort,
-                                  sizeof(task_abort), 0);
-       pm8001_dbg(pm8001_ha, FAIL, "Executing abort task end\n");
-       if (ret) {
-               sas_free_task(task);
-               pm8001_ccb_free(pm8001_ha, ccb);
-       }
-}
-
-static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
-               struct pm8001_device *pm8001_ha_dev)
-{
-       struct sata_start_req sata_cmd;
-       int res;
-       struct pm8001_ccb_info *ccb;
-       struct sas_task *task = NULL;
-       struct host_to_dev_fis fis;
-       struct domain_device *dev;
-       u32 opc = OPC_INB_SATA_HOST_OPSTART;
-
-       task = sas_alloc_slow_task(GFP_ATOMIC);
-       if (!task) {
-               pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
-               return;
-       }
-       task->task_done = pm8001_task_done;
-
-       /*
-        * Allocate domain device by ourselves as libsas is not going to
-        * provide any.
-        */
-       dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
-       if (!dev) {
-               sas_free_task(task);
-               pm8001_dbg(pm8001_ha, FAIL,
-                          "Domain device cannot be allocated\n");
-               return;
-       }
-
-       task->dev = dev;
-       task->dev->lldd_dev = pm8001_ha_dev;
-
-       ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-       if (!ccb) {
-               sas_free_task(task);
-               kfree(dev);
-               return;
-       }
-
-       pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
-       pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
-
-       memset(&sata_cmd, 0, sizeof(sata_cmd));
-
-       /* construct read log FIS */
-       memset(&fis, 0, sizeof(struct host_to_dev_fis));
-       fis.fis_type = 0x27;
-       fis.flags = 0x80;
-       fis.command = ATA_CMD_READ_LOG_EXT;
-       fis.lbal = 0x10;
-       fis.sector_count = 0x1;
-
-       sata_cmd.tag = cpu_to_le32(ccb->ccb_tag);
-       sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-       sata_cmd.ncqtag_atap_dir_m_dad = cpu_to_le32(((0x1 << 7) | (0x5 << 9)));
-       memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
-
-       res = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
-                                  sizeof(sata_cmd), 0);
-       pm8001_dbg(pm8001_ha, FAIL, "Executing read log end\n");
-       if (res) {
-               sas_free_task(task);
-               pm8001_ccb_free(pm8001_ha, ccb);
-               kfree(dev);
-       }
-}
-
 /**
  * mpi_ssp_completion - process the event that FW response to the SSP request.
  * @pm8001_ha: our hba card information
@@ -2402,11 +2295,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
                return;
        }
 
-       if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
-               && unlikely(!t || !t->lldd_task || !t->dev)) {
-               pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
+
+       if (pm8001_dev && unlikely(!t->lldd_task || !t->dev))
                return;
-       }
 
        ts = &t->task_status;
 
@@ -2463,15 +2354,6 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
                if (param == 0) {
                        ts->resp = SAS_TASK_COMPLETE;
                        ts->stat = SAS_SAM_STAT_GOOD;
-                       /* check if response is for SEND READ LOG */
-                       if (pm8001_dev &&
-                           (pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
-                               pm80xx_send_abort_all(pm8001_ha, pm8001_dev);
-                               /* Free the tag */
-                               pm8001_tag_free(pm8001_ha, tag);
-                               sas_free_task(t);
-                               return;
-                       }
                } else {
                        u8 len;
                        ts->resp = SAS_TASK_COMPLETE;
@@ -2806,9 +2688,11 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
        if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
                /* find device using device id */
                pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
-               /* send read log extension */
+               /* send read log extension by aborting the link - libata does what we want */
                if (pm8001_dev)
-                       pm80xx_send_read_log(pm8001_ha, pm8001_dev);
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_XFER_ERROR_ABORTED_NCQ_MODE);
                return;
        }
 
@@ -4556,7 +4440,6 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
        u32 end_addr_high, end_addr_low;
        u32 ATAP = 0x0;
        u32 dir;
-       unsigned long flags;
        u32 opc = OPC_INB_SATA_HOST_OPSTART;
        memset(&sata_cmd, 0, sizeof(sata_cmd));
 
@@ -4735,40 +4618,6 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
                                     (task->ata_task.atapi_packet[15] << 24)));
        }
 
-       /* Check for read log for failed drive and return */
-       if (sata_cmd.sata_fis.command == 0x2f) {
-               if (pm8001_ha_dev && ((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
-                       (pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
-                       (pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
-                       struct task_status_struct *ts;
-
-                       pm8001_ha_dev->id &= 0xDFFFFFFF;
-                       ts = &task->task_status;
-
-                       spin_lock_irqsave(&task->task_state_lock, flags);
-                       ts->resp = SAS_TASK_COMPLETE;
-                       ts->stat = SAS_SAM_STAT_GOOD;
-                       task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-                       task->task_state_flags |= SAS_TASK_STATE_DONE;
-                       if (unlikely((task->task_state_flags &
-                                       SAS_TASK_STATE_ABORTED))) {
-                               spin_unlock_irqrestore(&task->task_state_lock,
-                                                       flags);
-                               pm8001_dbg(pm8001_ha, FAIL,
-                                          "task 0x%p resp 0x%x  stat 0x%x but aborted by upper layer\n",
-                                          task, ts->resp,
-                                          ts->stat);
-                               pm8001_ccb_task_free(pm8001_ha, ccb);
-                               return 0;
-                       } else {
-                               spin_unlock_irqrestore(&task->task_state_lock,
-                                                       flags);
-                               pm8001_ccb_task_free_done(pm8001_ha, ccb);
-                               atomic_dec(&pm8001_ha_dev->running_req);
-                               return 0;
-                       }
-               }
-       }
        trace_pm80xx_request_issue(pm8001_ha->id,
                                ccb->device ? ccb->device->attached_phy : PM8001_MAX_PHYS,
                                ccb->ccb_tag, opc,
--

2.35.3

author
#12 lore raw

PATCH v6 7/8 scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private

In reply to John Garry

We have no users outside libsas any longer, so make sas_alloc_task(), sas_alloc_slow_task(), and sas_free_task() private.

---
 drivers/scsi/libsas/sas_init.c     | 3 ---
 drivers/scsi/libsas/sas_internal.h | 4 ++++
 include/scsi/libsas.h              | 4 ----
 3 files changed, 4 insertions(+), 7 deletions(-)
drivers/scsi/libsas/sas_init.c +0 -3
index e4f77072a58d..f2c05ebeb72f 100644
@@ -35,7 +35,6 @@ struct sas_task *sas_alloc_task(gfp_t flags)
 
 	return task;
 }
-EXPORT_SYMBOL_GPL(sas_alloc_task);
 
 struct sas_task *sas_alloc_slow_task(gfp_t flags)
 {
@@ -56,7 +55,6 @@ struct sas_task *sas_alloc_slow_task(gfp_t flags)
 
 	return task;
 }
-EXPORT_SYMBOL_GPL(sas_alloc_slow_task);
 
 void sas_free_task(struct sas_task *task)
 {
@@ -65,7 +63,6 @@ void sas_free_task(struct sas_task *task)
 		kmem_cache_free(sas_task_cache, task);
 	}
 }
-EXPORT_SYMBOL_GPL(sas_free_task);
 
 /*------------ SAS addr hash -----------*/
 void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
drivers/scsi/libsas/sas_internal.h +4 -0
index 8d0ad3abc7b5..b54bcf3c9a9d 100644
@@ -52,6 +52,10 @@ void sas_unregister_phys(struct sas_ha_struct *sas_ha);
 struct asd_sas_event *sas_alloc_event(struct asd_sas_phy *phy, gfp_t gfp_flags);
 void sas_free_event(struct asd_sas_event *event);
 
+struct sas_task *sas_alloc_task(gfp_t flags);
+struct sas_task *sas_alloc_slow_task(gfp_t flags);
+void sas_free_task(struct sas_task *task);
+
 int  sas_register_ports(struct sas_ha_struct *sas_ha);
 void sas_unregister_ports(struct sas_ha_struct *sas_ha);
 
include/scsi/libsas.h +0 -4
index 2dbead74a2af..f86b56bf7833 100644
@@ -639,10 +639,6 @@ struct sas_task_slow {
 #define SAS_TASK_STATE_ABORTED      4
 #define SAS_TASK_NEED_DEV_RESET     8
 
-extern struct sas_task *sas_alloc_task(gfp_t flags);
-extern struct sas_task *sas_alloc_slow_task(gfp_t flags);
-extern void sas_free_task(struct sas_task *task);
-
 static inline bool sas_is_internal_abort(struct sas_task *task)
 {
 	return task->task_proto == SAS_PROTOCOL_INTERNAL_ABORT;
Signature · 1 line
2.35.3
author
#13 lore raw

PATCH v6 8/8 scsi: libsas: Update SATA dev FIS in sas_ata_task_done()

In reply to John Garry

In sas_ata_task_done(), for commands which complete with error we set the SATA dev FIS status field with ATA_ERR. In ata_eh_analyze_tf() this would be interpreted as a HSM error. Set ATA_DRDY, which will lead libata to judge as a device error, which is a safer bet.

---
 drivers/scsi/libsas/sas_ata.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/libsas/sas_ata.c +2 -2
index 61f64d54e67d..78e6046fb55a 100644
@@ -139,8 +139,8 @@ static void sas_ata_task_done(struct sas_task *task)
 				qc->flags |= ATA_QCFLAG_FAILED;
 			}
 
-			dev->sata_dev.fis[3] = 0x04; /* status err */
-			dev->sata_dev.fis[2] = ATA_ERR;
+			dev->sata_dev.fis[2] = ATA_ERR | ATA_DRDY; /* tf status */
+			dev->sata_dev.fis[3] = ATA_ABORTED; /* tf error */
 		}
 	}
 
Signature · 1 line
2.35.3
Reviewed-by on v6 8/8
#14 lore raw

Re: [PATCH v6 8/8] scsi: libsas: Update SATA dev FIS in sas_ata_task_done()

Quoted 28 lines · John Garry

In sas_ata_task_done(), for commands which complete with error we set the SATA dev FIS status field with ATA_ERR. In ata_eh_analyze_tf() this would be interpreted as a HSM error. Set ATA_DRDY, which will lead libata to judge as a device error, which is a safer bet.

---
 drivers/scsi/libsas/sas_ata.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/libsas/sas_ata.c +2 -2
index 61f64d54e67d..78e6046fb55a 100644
@@ -139,8 +139,8 @@ static void sas_ata_task_done(struct sas_task *task)
 				qc->flags |= ATA_QCFLAG_FAILED;
 			}
 
-			dev->sata_dev.fis[3] = 0x04; /* status err */
-			dev->sata_dev.fis[2] = ATA_ERR;
+			dev->sata_dev.fis[2] = ATA_ERR | ATA_DRDY; /* tf status */
+			dev->sata_dev.fis[3] = ATA_ABORTED; /* tf error */
 		}
 	}
 
Signature · 1 line
2.35.3
#15 lore raw
In reply to John Garry

John,

Quoted 5 lines

As reported in [0], the pm8001 driver NCQ error handling more or less duplicates what libata does in link error handling, as follows:
- abort all commands
- do autopsy with read log ext 10 command
- reset the target to recover, if necessary

Applied to 6.2/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#16 lore raw
In reply to John Garry
Quoted 10 lines · John Garry

As reported in [0], the pm8001 driver NCQ error handling more or less duplicates what libata does in link error handling, as follows:
- abort all commands
- do autopsy with read log ext 10 command
- reset the target to recover, if necessary

Indeed for the hisi_sas driver we want to add similar handling for NCQ errors.

[...]

Applied to 6.2/scsi-queue, thanks!

[1/8] scsi: libsas: Add sas_ata_device_link_abort()

      https://git.kernel.org/mkp/scsi/c/44112922674b
[2/8] scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()
      https://git.kernel.org/mkp/scsi/c/4b329abc9180
[3/8] scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw
      https://git.kernel.org/mkp/scsi/c/930d97dabdd5
[4/8] scsi: hisi_sas: Modify v3 HW SATA disk error state completion processing
      https://git.kernel.org/mkp/scsi/c/4ef4f1a61555
[5/8] scsi: pm8001: Modify task abort handling for SATA task
      https://git.kernel.org/mkp/scsi/c/0b639decf651
[6/8] scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors
      https://git.kernel.org/mkp/scsi/c/811be570a9a8
[7/8] scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private
      https://git.kernel.org/mkp/scsi/c/8e8d43642f2f
[8/8] scsi: libsas: Update SATA dev FIS in sas_ata_task_done()
      https://git.kernel.org/mkp/scsi/c/cc22efbec011
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering