spi: aspeed: Fix window offset of CE1
Subsystems (3)
Cédric Le Goater
maintainerPATCH 1/1 spi: aspeed: Fix window offset of CE1
The offset value of the mapping window in the kernel structure is calculated using the value of the previous window offset. This doesn't reflect how the HW is configured and can lead to erroneous setting of the second flash device (CE1).
--- drivers/spi/spi-aspeed-smc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-aspeed-smc.c +1 -1
@@ -398,7 +398,7 @@ static void aspeed_spi_get_windows(struct aspeed_spi *aspi, windows[cs].cs = cs; windows[cs].size = data->segment_end (aspi, reg_val) - data->segment_start (aspi, reg_val); - windows[cs].offset = cs ? windows[cs -1 ].offset + windows[cs -1 ].size :0 ; + windows[cs].offset = data->segment_start (aspi, reg_val) - aspi->ahb_base_phy;dev_vdbg (aspi->dev,"CE%d offset=0x%.8x size=0x%x\n" , cs, windows[cs].offset, windows[cs].size); }
Signature · 1 line
2.37.3
Quoted 5 lines · C?dric Le Goater
The offset value of the mapping window in the kernel structure is calculated using the value of the previous window offset. This doesn't reflect how the HW is configured and can lead to erroneous setting of the second flash device (CE1).
So .offset is expected to be the absolute address of the window, and this was okay for the 2400/2500 but was broken on the 2600?
Quoted 24 lines
Cc Chin-Ting Kuo <[email protected]>Fixes e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem")Signed-off-by C?dric Le Goater <[email protected]>--- drivers/spi/spi-aspeed-smc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/spi/spi-aspeed-smc.c +1
-2@@ -398,7 +398,7 @@ static void aspeed_spi_get_windows(struct aspeed_spi *aspi, windows[cs].cs = cs; windows[cs].size = data->segment_end (aspi, reg_val) - data->segment_start (aspi, reg_val); - windows[cs].offset = cs ? windows[cs -1 ].offset + windows[cs -1 ].size :0 ; + windows[cs].offset = data->segment_start (aspi, reg_val) - aspi->ahb_base_phy;dev_vdbg (aspi->dev,"CE%d offset=0x%.8x size=0x%x\n" , cs, windows[cs].offset, windows[cs].size); } --2.37.3
Cédric Le Goater
maintainerQuoted 9 lines · Joel Stanley
Quoted 5 lines · C?dric Le Goater
The offset value of the mapping window in the kernel structure is calculated using the value of the previous window offset. This doesn't reflect how the HW is configured and can lead to erroneous setting of the second flash device (CE1).
So .offset is expected to be the absolute address of the window, and this was okay for the 2400/2500 but was broken on the 2600?
the aspeed_spi_get_windows() routine collects in an array the window/decoding range setting for each CS, and the offset for CS1 and above is computed from the offset/size of the previous CS. But this makes an assumption on the fact ranges are contiguous, which is not necessarily how the HW is configured.
C.
Quoted 27 lines
Reviewed-by Joel Stanley <[email protected]>Quoted 24 lines
Cc Chin-Ting Kuo <[email protected]>Fixes e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem")Signed-off-by C?dric Le Goater <[email protected]>--- drivers/spi/spi-aspeed-smc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/spi/spi-aspeed-smc.c +1
-2@@ -398,7 +398,7 @@ static void aspeed_spi_get_windows(struct aspeed_spi *aspi, windows[cs].cs = cs; windows[cs].size = data->segment_end (aspi, reg_val) - data->segment_start (aspi, reg_val); - windows[cs].offset = cs ? windows[cs -1 ].offset + windows[cs -1 ].size :0 ; + windows[cs].offset = data->segment_start (aspi, reg_val) - aspi->ahb_base_phy;dev_vdbg (aspi->dev,"CE%d offset=0x%.8x size=0x%x\n" , cs, windows[cs].offset, windows[cs].size); } --2.37.3
Mark Brown
maintainerQuoted 6 lines · C?dric Le Goater
The offset value of the mapping window in the kernel structure is calculated using the value of the previous window offset. This doesn't reflect how the HW is configured and can lead to erroneous setting of the second flash device (CE1).
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: aspeed: Fix window offset of CE1
commit: f8aa6c895d482847c9b799dcdac8bbdb56cb8e04
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark