Skip to contentSkip to conversation

Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED

PATCH Applied Luiz Augusto von Dentz 3 participants 3 messages Oct 27, 2022 – Oct 28, 2022

Subsystems (2)
lore
Share & tools
lore

Luiz Augusto von Dentz

author maintainer
#0 lore raw

PATCH 1/1 Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED

From: Luiz Augusto von Dentz <[email protected]>

This adds CONFIG_BT_LE_L2CAP_ECRED which can be used to enable L2CAP Enhanced Credit Flow Control Mode by default, previously it was only possible to set it via module parameter (e.g. bluetooth.enable_ecred=1).

Since L2CAP ECRED mode is required by the likes of EATT which is recommended for LE Audio this enables it by default.

---
 net/bluetooth/Kconfig      | 11 +++++++++++
 net/bluetooth/l2cap_core.c |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)
net/bluetooth/Kconfig +11 -0
index ae3bdc6dfc92..da7cac0a1b71 100644
@@ -78,6 +78,17 @@ config BT_LE
 	  Bluetooth Low Energy includes support low-energy physical
 	  layer available with Bluetooth version 4.0 or later.
 
+config BT_LE_L2CAP_ECRED
+	bool "Bluetooth L2CAP Enhanced Credit Flow Control"
+	depends on BT_LE
+	default y
+	help
+	  Bluetooth Low Energy L2CAP Enhanced Credit Flow Control available with
+	  Bluetooth version 5.2 or later.
+
+	  This can be overridden by passing bluetooth.enable_ecred=[1|0]
+	  on the kernel commandline.
+
 config BT_6LOWPAN
 	tristate "Bluetooth 6LoWPAN support"
 	depends on BT_LE && 6LOWPAN
net/bluetooth/l2cap_core.c +1 -1
index 1fbe087d6ae4..ef725ed41303 100644
@@ -45,7 +45,7 @@
 #define LE_FLOWCTL_MAX_CREDITS 65535
 
 bool disable_ertm;
-bool enable_ecred;
+bool enable_ecred = IS_ENABLED(CONFIG_BT_LE_L2CAP_ECRED);
 
 static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN | L2CAP_FEAT_UCD;
 
Signature · 1 line
2.37.3
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=689611

---Test result---

Test Summary:

CheckPatch                    PASS      1.83 seconds
GitLint                       PASS      1.05 seconds
SubjectPrefix                 PASS      0.88 seconds
BuildKernel                   PASS      34.27 seconds
BuildKernel32                 PASS      31.02 seconds
Incremental Build with patchesPASS      46.58 seconds
TestRunner: Setup             PASS      514.95 seconds
TestRunner: l2cap-tester      PASS      17.48 seconds
TestRunner: iso-tester        PASS      16.75 seconds
TestRunner: bnep-tester       PASS      6.64 seconds
TestRunner: mgmt-tester       PASS      106.88 seconds
TestRunner: rfcomm-tester     PASS      10.50 seconds
TestRunner: sco-tester        PASS      9.95 seconds
TestRunner: ioctl-tester      PASS      11.37 seconds
TestRunner: mesh-tester       PASS      8.19 seconds
TestRunner: smp-tester        PASS      10.02 seconds
TestRunner: userchan-tester   PASS      6.99 seconds

---
Regards,
Linux Bluetooth

#2 lore raw
In reply to Luiz Augusto von Dentz
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 10 lines · On Thu, 27 Oct 2022 16:25:28 -0700 you wrote:

From: Luiz Augusto von Dentz <[email protected]>

This adds CONFIG_BT_LE_L2CAP_ECRED which can be used to enable L2CAP Enhanced Credit Flow Control Mode by default, previously it was only possible to set it via module parameter (e.g. bluetooth.enable_ecred=1).

Since L2CAP ECRED mode is required by the likes of EATT which is recommended for LE Audio this enables it by default.

[...]

Here is the summary with links:
- Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED

    https://git.kernel.org/bluetooth/bluetooth-next/c/98f18bb78b7d

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html