FAILED: patch "[PATCH] can: kvaser_usb: Fix possible completions during" failed to apply to 4.14-stable tree

The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

Possible dependencies:

2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion") aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") 7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") e0543f2479f8 ("can: kvaser_usb: Add SPDX GPL-2.0 license identifier") 2b049c150080 ("can: kvaser_usb: Fix typos")
6ba0b9294bca ("can: kvaser_usb: Improve logging messages")
7c4780146177 ("can: kvaser_usb: Refactor kvaser_usb_init_one()")
99ce1bc17462 ("can: kvaser_usb: Refactor kvaser_usb_get_endpoints()") 0e30619fd6fa ("can: kvaser_usb: Add pointer to struct usb_interface into struct kvaser_usb") 75d2b4c3e399 ("can: kvaser_usb: Replace USB timeout constants with one define") f741f938556d ("can: kvaser_usb: Rename message/msg to command/cmd") 237572220121 ("can: kvaser_usb: Remove unused commands and defines") deaa1c984be7 ("can: kvaser_usb: Remove unnecessary return")
ffbdd9172ee2 ("can: usb: Kconfig/Makefile: sort alphabetically")
6ee00865ffe4 ("can: kvaser_usb: Increase correct stats counter in kvaser_usb_rx_can_msg()") 6aa8d5945502 ("can: kvaser_usb: cancel urb on -EPIPE and -EPROTO") 8bd13bd522ff ("can: kvaser_usb: ratelimit errors if incomplete messages are received") e84f44eb5523 ("can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()") 435019b48033 ("can: kvaser_usb: free buf in error paths")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 2871edb32f4622c3a25ce4b3977bad9050b91974 Mon Sep 17 00:00:00 2001
From: Anssi Hannula <[email protected]>
Date: Mon, 10 Oct 2022 20:52:27 +0200
Subject: [PATCH] can: kvaser_usb: Fix possible completions during
init_completion

kvaser_usb uses completions to signal when a response event is received for outgoing commands.

However, it uses init_completion() to reinitialize the start_comp and stop_comp completions before sending the start/stop commands.

In case the device sends the corresponding response just before the actual command is sent, complete() may be called concurrently with init_completion() which is not safe.

This might be triggerable even with a properly functioning device by stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which also causes the driver to send CMD_STOP_CHIP when restart-ms is off), but that was not tested.

Fix the issue by using reinit_completion() instead.

index 7b52fda73d82..66f672ea631b 100644
@@ -1875,7 +1875,7 @@ static int kvaser_usb_hydra_start_chip(struct kvaser_usb_net_priv *priv)
 {
 	int err;
 
-	init_completion(&priv->start_comp);
+	reinit_completion(&priv->start_comp);
 
 	err = kvaser_usb_hydra_send_simple_cmd(priv->dev, CMD_START_CHIP_REQ,
 					       priv->channel);

@@ -1893,7 +1893,7 @@ static int kvaser_usb_hydra_stop_chip(struct kvaser_usb_net_priv *priv)
 {
 	int err;
 
-	init_completion(&priv->stop_comp);
+	reinit_completion(&priv->stop_comp);
 
 	/* Make sure we do not report invalid BUS_OFF from CMD_CHIP_STATE_EVENT
 	 * see comment in kvaser_usb_hydra_update_state()

index 50f2ac8319ff..19958037720f 100644
@@ -1320,7 +1320,7 @@ static int kvaser_usb_leaf_start_chip(struct kvaser_usb_net_priv *priv)
 {
 	int err;
 
-	init_completion(&priv->start_comp);
+	reinit_completion(&priv->start_comp);
 
 	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_START_CHIP,
 					      priv->channel);

@@ -1338,7 +1338,7 @@ static int kvaser_usb_leaf_stop_chip(struct kvaser_usb_net_priv *priv)
 {
 	int err;
 
-	init_completion(&priv->stop_comp);
+	reinit_completion(&priv->stop_comp);
 
 	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_STOP_CHIP,
 					      priv->channel);