wifi: rtw89: add BW info for both TX and RX in phy_info
Ping-Ke Shih
maintainerPATCH 1/1 wifi: rtw89: add BW info for both TX and RX in phy_info
From: Eric Huang <[email protected]>
In order to debug performance issue intuitively, add bandwidth information into debugfs entry phy_info. After applying this patch, it looks like:
TX rate [0]: HE 2SS MCS-11 GI:0.8 BW:80 (hw_rate=0x19b) ==> agg_wait=1 (3500) RX rate [0]: HE 2SS MCS-9 GI:0.8 BW:80 (hw_rate=0x199)
--- drivers/net/wireless/realtek/rtw89/debug.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
drivers/net/wireless/realtek/rtw89/debug.c +18 -0
@@ -51,6 +51,22 @@ struct rtw89_debugfs_priv { }; }; +static const u16 rtw89_rate_info_bw_to_mhz_map[] = { + [RATE_INFO_BW_20 ] =20 , + [RATE_INFO_BW_40 ] =40 , + [RATE_INFO_BW_80 ] =80 , + [RATE_INFO_BW_160 ] =160 , + [RATE_INFO_BW_320 ] =320 , +}; + +static u16 rtw89_rate_info_bw_to_mhz (enum rate_info_bw bw) +{ +if (bw <ARRAY_SIZE (rtw89_rate_info_bw_to_mhz_map)) +return rtw89_rate_info_bw_to_mhz_map[bw]; + +return 0 ; +} +static int rtw89_debugfs_single_show (struct seq_file *m,void *v) {struct rtw89_debugfs_priv *debugfs_priv = m->private;
@@ -2379,6 +2395,7 @@ static void rtw89_sta_info_get_iter(void *data, struct ieee80211_sta *sta)else seq_printf (m,"Legacy %d" , rate->legacy);seq_printf (m,"%s" , rtwsta->ra_report.might_fallback_legacy ?" FB_G" :"" ); +seq_printf (m," BW:%u" ,rtw89_rate_info_bw_to_mhz (rate->bw));seq_printf (m,"\t(hw_rate=0x%x)" , rtwsta->ra_report.hw_rate);seq_printf (m,"\t==> agg_wait=%d (%d)\n" , rtwsta->max_agg_wait, sta->deflink.agg.max_rc_amsdu_len);
@@ -2404,6 +2421,7 @@ static void rtw89_sta_info_get_iter(void *data, struct ieee80211_sta *sta) he_gi_str[rate->he_gi] : "N/A"); break; } +seq_printf (m," BW:%u" ,rtw89_rate_info_bw_to_mhz (status->bw));seq_printf (m,"\t(hw_rate=0x%x)\n" , rtwsta->rx_hw_rate); rssi =ewma_rssi_read (&rtwsta->avg_rssi);
Signature · 1 line
2.25.1
Quoted 10 lines · Ping-Ke Shih
From: Eric Huang <[email protected]>
In order to debug performance issue intuitively, add bandwidth information into debugfs entry
phy_info. After applying this patch, it looks like:TX rate [0]: HE 2SS MCS-11 GI:0.8 BW:80 (hw_rate=0x19b) ==> agg_wait=1 (3500) RX rate [0]: HE 2SS MCS-9 GI:0.8 BW:80 (hw_rate=0x199)
Signed-off-by Eric Huang <[email protected]>Signed-off-by Ping-Ke Shih <[email protected]>
Patch applied to wireless-next.git, thanks.
25f49617b5c9 wifi: rtw89: add BW info for both TX and RX in phy_info
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches