Skip to contentSkip to conversation

tools/perf: Fix perf probe crash by clang DWARF5 file

PATCH Applied Masami Hiramatsu (Google) 6 participants 21 messages Nov 1, 2022 – Aug 29, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover tools/perf: Fix perf probe crash by clang DWARF5 file

Hi,

Here is the 2nd version of the patches for perf probe which improves the robustness against clang DWARF5 file.

Since the Clang generates a bit different DWARF5 file, the perf probe crashes or failes to analyze it. There are actually fragile code against it, so I fixed it ([1/3]) to avoid crash by SEGV. And make it accepts Clang's DWARF5 file ([2/3],[3/3]).

Without this series, the perf probe crashes with the DWARF5 file which generated by clang as below;

  $ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
  Segmentation fault

This series fixes it to handle such file correctly;

  $ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
  <vfs_read@$SRC_PATH/fs/read_write.c:10>
       11         ret = rw_verify_area(READ, file, pos, count);
       12         if (ret)
                           return ret;

On the DWARF5 specification, Sec 2.14, there is
"The value 0 indicates that no source file has been specified." for DW_AT_decl_file, but clang generated DWARF5 will use the value 0.

This issue is discussed on DWARF std ML;
https://www.mail-archive.com/[email protected]/msg00884.html

And suggested that removing this part from the specification.
http://wiki.dwarfstd.org/index.php?title=DWARF5_Line_Table_File_Numbers

So as far as I understand, this is out of standard at this moment, but the standard itself has a discussion on this part. And maybe updated as currently clang does in the next release/revision.

Thank you,

---

Masami Hiramatsu (Google) (3):
tools/perf: Fix to avoid crashing if DW_AT_decl_file is NULL tools/perf: Fix to use dwarf_attr_integrate for generic attr accessor tools/perf: Fix to get declared file name from clang DWARF5

 tools/perf/util/dwarf-aux.c    |   58 ++++++++++++++++++++++++++++------------
 tools/perf/util/dwarf-aux.h    |    3 ++
 tools/perf/util/probe-finder.c |   37 +++++++++++++++++---------
 3 files changed, 68 insertions(+), 30 deletions(-)

--
Masami Hiramatsu (Google) <[email protected]>

#1 lore raw

PATCH v2 1/3 tools/perf: Fix to avoid crashing if DW_AT_decl_file is NULL

From: Masami Hiramatsu (Google) <[email protected]>

Since Clang generates the DWARF5 which will set DW_AT_decl_file as 0, dwarf_decl_file() thinks that is invalid and returns NULL. In that case the perf probe will crash by SIGSEGV because it doesn't expect the NULL decl_file.

This adds checks of the return value of dwarf_decl_file() to avoid such SEGV with clang DWARF5 file.

Without this, perf probe crashes like below;

 $ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
 Segmentation fault

With this, perf probe just warns it;

 $ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
 Debuginfo analysis failed.
   Error: Failed to show lines.

---
Changes in v2:
- Update patch description.

---
 tools/perf/util/dwarf-aux.c    |    7 ++++++-
 tools/perf/util/probe-finder.c |   29 +++++++++++++++++++++--------
 2 files changed, 27 insertions(+), 9 deletions(-)
tools/perf/util/dwarf-aux.c +6 -1
index 609ca1671501..406b7bdc851a 100644
@@ -137,7 +137,7 @@ int cu_find_lineinfo(Dwarf_Die *cu_die, Dwarf_Addr addr,
 	}
 
 out:
-	return *lineno ?: -ENOENT;
+	return (*lineno && *fname) ? *lineno : -ENOENT;
 }
 
 static int __die_find_inline_cb(Dwarf_Die *die_mem, void *data);
@@ -874,6 +874,11 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
 		cu_die = dwarf_diecu(rt_die, &die_mem, NULL, NULL);
 		dwarf_decl_line(rt_die, &decl);
 		decf = dwarf_decl_file(rt_die);
+		if (!decf) {
+			pr_debug2("Failed to get the declared file name of %s\n",
+				  dwarf_diename(rt_die));
+			return -EINVAL;
+		}
 	} else
 		cu_die = rt_die;
 	if (!cu_die) {
tools/perf/util/probe-finder.c +21 -8
index 50d861a80f57..1aa8fcc41c76 100644
@@ -1063,6 +1063,7 @@ static int probe_point_search_cb(Dwarf_Die *sp_die, void *data)
 	struct dwarf_callback_param *param = data;
 	struct probe_finder *pf = param->data;
 	struct perf_probe_point *pp = &pf->pev->point;
+	const char *fname;
 
 	/* Check tag and diename */
 	if (!die_is_func_def(sp_die) ||
@@ -1070,12 +1071,17 @@ static int probe_point_search_cb(Dwarf_Die *sp_die, void *data)
 		return DWARF_CB_OK;
 
 	/* Check declared file */
-	if (pp->file && strtailcmp(pp->file, dwarf_decl_file(sp_die)))
+	fname = dwarf_decl_file(sp_die);
+	if (!fname) {
+		pr_warning("A function DIE doesn't have decl_line. Maybe broken DWARF?\n");
+		return DWARF_CB_OK;
+	}
+	if (pp->file && fname && strtailcmp(pp->file, fname))
 		return DWARF_CB_OK;
 
 	pr_debug("Matched function: %s [%lx]\n", dwarf_diename(sp_die),
 		 (unsigned long)dwarf_dieoffset(sp_die));
-	pf->fname = dwarf_decl_file(sp_die);
+	pf->fname = fname;
 	if (pp->line) { /* Function relative line */
 		dwarf_decl_line(sp_die, &pf->lno);
 		pf->lno += pp->line;
@@ -1134,6 +1140,7 @@ struct pubname_callback_param {
 static int pubname_search_cb(Dwarf *dbg, Dwarf_Global *gl, void *data)
 {
 	struct pubname_callback_param *param = data;
+	const char *fname;
 
 	if (dwarf_offdie(dbg, gl->die_offset, param->sp_die)) {
 		if (dwarf_tag(param->sp_die) != DW_TAG_subprogram)
@@ -1143,9 +1150,11 @@ static int pubname_search_cb(Dwarf *dbg, Dwarf_Global *gl, void *data)
 			if (!dwarf_offdie(dbg, gl->cu_offset, param->cu_die))
 				return DWARF_CB_OK;
 
-			if (param->file &&
-			    strtailcmp(param->file, dwarf_decl_file(param->sp_die)))
-				return DWARF_CB_OK;
+			if (param->file) {
+				fname = dwarf_decl_file(param->sp_die);
+				if (!fname || strtailcmp(param->file, fname))
+					return DWARF_CB_OK;
+			}
 
 			param->found = 1;
 			return DWARF_CB_ABORT;
@@ -1779,7 +1788,7 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, u64 addr,
 		}
 		/* Verify the lineno and baseline are in a same file */
 		tmp = dwarf_decl_file(&spdie);
-		if (!tmp || strcmp(tmp, fname) != 0)
+		if (!tmp || (fname && strcmp(tmp, fname) != 0))
 			lineno = 0;
 	}
 
@@ -1889,10 +1898,14 @@ static int line_range_search_cb(Dwarf_Die *sp_die, void *data)
 	struct dwarf_callback_param *param = data;
 	struct line_finder *lf = param->data;
 	struct line_range *lr = lf->lr;
+	const char *fname;
 
 	/* Check declared file */
-	if (lr->file && strtailcmp(lr->file, dwarf_decl_file(sp_die)))
-		return DWARF_CB_OK;
+	if (lr->file) {
+		fname = dwarf_decl_file(sp_die);
+		if (!fname || strtailcmp(lr->file, fname))
+			return DWARF_CB_OK;
+	}
 
 	if (die_match_name(sp_die, lr->function) && die_is_func_def(sp_die)) {
 		lf->fname = dwarf_decl_file(sp_die);
#2 lore raw

PATCH v2 2/3 tools/perf: Fix to use dwarf_attr_integrate for generic attr accessor

In reply to Masami Hiramatsu (Google)

From: Masami Hiramatsu (Google) <[email protected]>

Use dwarf_attr_integrate() instead of dwarf_attr() for generic attribute acccessor functions, so that it can find the specified attribute from abstact origin DIE etc.

---
 tools/perf/util/dwarf-aux.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/perf/util/dwarf-aux.c +2 -2
index 406b7bdc851a..216fc3d959e8 100644
@@ -308,7 +308,7 @@ static int die_get_attr_udata(Dwarf_Die *tp_die, unsigned int attr_name,
 {
 	Dwarf_Attribute attr;
 
-	if (dwarf_attr(tp_die, attr_name, &attr) == NULL ||
+	if (dwarf_attr_integrate(tp_die, attr_name, &attr) == NULL ||
 	    dwarf_formudata(&attr, result) != 0)
 		return -ENOENT;
 
@@ -321,7 +321,7 @@ static int die_get_attr_sdata(Dwarf_Die *tp_die, unsigned int attr_name,
 {
 	Dwarf_Attribute attr;
 
-	if (dwarf_attr(tp_die, attr_name, &attr) == NULL ||
+	if (dwarf_attr_integrate(tp_die, attr_name, &attr) == NULL ||
 	    dwarf_formsdata(&attr, result) != 0)
 		return -ENOENT;
 
#3 lore raw

PATCH v2 3/3 tools/perf: Fix to get declared file name from clang DWARF5

In reply to Masami Hiramatsu (Google)

From: Masami Hiramatsu (Google) <[email protected]>

Fix to get the declared file name even if it uses file index 0 in DWARF5, using custom die_get_decl_file() function.

Actually, the DWARF5 standard says file index 0 of the DW_AT_decl_file is invalid(*), but there is a discussion and maybe this will be updated. Anyway, the clang generates such DWARF5 file for the linux kernel. Thus it must be handled.

Without this, the perf probe returns an error;

 $ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
 Debuginfo analysis failed.
   Error: Failed to show lines.

With this, it can handle the case correctly;

 $ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
 <vfs_read@$SRC_PATH/fs/read_write.c:10>
      11         ret = rw_verify_area(READ, file, pos, count);
      12         if (ret)
                          return ret;

(* DWARF5 specification 2.14 says "The value 0 indicates that no source file has been specified.")
(**
http://wiki.dwarfstd.org/index.php?title=DWARF5_Line_Table_File_Numbers)

---
Changes in v2:
- Update description so that it is clang version of DWARF5.

---
 tools/perf/util/dwarf-aux.c    |   47 +++++++++++++++++++++++++++-------------
 tools/perf/util/dwarf-aux.h    |    3 +++
 tools/perf/util/probe-finder.c |   14 ++++++------
 3 files changed, 42 insertions(+), 22 deletions(-)
tools/perf/util/dwarf-aux.c +32 -15
index 216fc3d959e8..30b36b525681 100644
@@ -123,7 +123,7 @@ int cu_find_lineinfo(Dwarf_Die *cu_die, Dwarf_Addr addr,
 	if (die_find_realfunc(cu_die, addr, &die_mem)
 	    && die_entrypc(&die_mem, &faddr) == 0 &&
 	    faddr == addr) {
-		*fname = dwarf_decl_file(&die_mem);
+		*fname = die_get_decl_file(&die_mem);
 		dwarf_decl_line(&die_mem, lineno);
 		goto out;
 	}
@@ -486,6 +486,19 @@ static int die_get_decl_fileno(Dwarf_Die *pdie)
 		return -ENOENT;
 }
 
+/* Return the file name by index */
+static const char *die_get_file_name(Dwarf_Die *dw_die, int idx)
+{
+	Dwarf_Die cu_die;
+	Dwarf_Files *files;
+
+	if (idx < 0 || !dwarf_diecu(dw_die, &cu_die, NULL, NULL) ||
+	    dwarf_getsrcfiles(&cu_die, &files, NULL) != 0)
+		return NULL;
+
+	return dwarf_filesrc(files, idx, NULL, NULL);
+}
+
 /**
  * die_get_call_file - Get callsite file name of inlined function instance
  * @in_die: a DIE of an inlined function instance
@@ -495,18 +508,22 @@ static int die_get_decl_fileno(Dwarf_Die *pdie)
  */
 const char *die_get_call_file(Dwarf_Die *in_die)
 {
-	Dwarf_Die cu_die;
-	Dwarf_Files *files;
-	int idx;
-
-	idx = die_get_call_fileno(in_die);
-	if (idx < 0 || !dwarf_diecu(in_die, &cu_die, NULL, NULL) ||
-	    dwarf_getsrcfiles(&cu_die, &files, NULL) != 0)
-		return NULL;
-
-	return dwarf_filesrc(files, idx, NULL, NULL);
+	return die_get_file_name(in_die, die_get_call_fileno(in_die));
 }
 
+/**
+ * die_get_decl_file - Find the declared file name of this DIE
+ * @dw_die: a DIE for something declared.
+ *
+ * Get declared file name of @dw_die.
+ * NOTE: Since some version of clang DWARF5 implementation incorrectly uses
+ * file index 0 for DW_AT_decl_file, die_get_decl_file() will return NULL for
+ * such cases. Use this function instead.
+ */
+const char *die_get_decl_file(Dwarf_Die *dw_die)
+{
+	return die_get_file_name(dw_die, die_get_decl_fileno(dw_die));
+}
 
 /**
  * die_find_child - Generic DIE search function in DIE tree
@@ -790,7 +807,7 @@ static int __die_walk_funclines_cb(Dwarf_Die *in_die, void *data)
 	}
 
 	if (addr) {
-		fname = dwarf_decl_file(in_die);
+		fname = die_get_decl_file(in_die);
 		if (fname && dwarf_decl_line(in_die, &lineno) == 0) {
 			lw->retval = lw->callback(fname, lineno, addr, lw->data);
 			if (lw->retval != 0)
@@ -818,7 +835,7 @@ static int __die_walk_funclines(Dwarf_Die *sp_die, bool recursive,
 	int lineno;
 
 	/* Handle function declaration line */
-	fname = dwarf_decl_file(sp_die);
+	fname = die_get_decl_file(sp_die);
 	if (fname && dwarf_decl_line(sp_die, &lineno) == 0 &&
 	    die_entrypc(sp_die, &addr) == 0) {
 		lw.retval = callback(fname, lineno, addr, data);
@@ -873,7 +890,7 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
 	if (dwarf_tag(rt_die) != DW_TAG_compile_unit) {
 		cu_die = dwarf_diecu(rt_die, &die_mem, NULL, NULL);
 		dwarf_decl_line(rt_die, &decl);
-		decf = dwarf_decl_file(rt_die);
+		decf = die_get_decl_file(rt_die);
 		if (!decf) {
 			pr_debug2("Failed to get the declared file name of %s\n",
 				  dwarf_diename(rt_die));
@@ -928,7 +945,7 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
 
 				dwarf_decl_line(&die_mem, &inl);
 				if (inl != decl ||
-				    decf != dwarf_decl_file(&die_mem))
+				    decf != die_get_decl_file(&die_mem))
 					continue;
 			}
 		}
tools/perf/util/dwarf-aux.h +3 -0
index 7ee0fa19b5c4..7ec8bc1083bb 100644
@@ -50,6 +50,9 @@ int die_get_call_lineno(Dwarf_Die *in_die);
 /* Get callsite file name of inlined function instance */
 const char *die_get_call_file(Dwarf_Die *in_die);
 
+/* Get declared file name of a DIE */
+const char *die_get_decl_file(Dwarf_Die *dw_die);
+
 /* Get type die */
 Dwarf_Die *die_get_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem);
 
tools/perf/util/probe-finder.c +7 -7
index 1aa8fcc41c76..54b49ce85c9f 100644
@@ -763,7 +763,7 @@ static int find_best_scope_cb(Dwarf_Die *fn_die, void *data)
 
 	/* Skip if declared file name does not match */
 	if (fsp->file) {
-		file = dwarf_decl_file(fn_die);
+		file = die_get_decl_file(fn_die);
 		if (!file || strcmp(fsp->file, file) != 0)
 			return 0;
 	}
@@ -1071,7 +1071,7 @@ static int probe_point_search_cb(Dwarf_Die *sp_die, void *data)
 		return DWARF_CB_OK;
 
 	/* Check declared file */
-	fname = dwarf_decl_file(sp_die);
+	fname = die_get_decl_file(sp_die);
 	if (!fname) {
 		pr_warning("A function DIE doesn't have decl_line. Maybe broken DWARF?\n");
 		return DWARF_CB_OK;
@@ -1151,7 +1151,7 @@ static int pubname_search_cb(Dwarf *dbg, Dwarf_Global *gl, void *data)
 				return DWARF_CB_OK;
 
 			if (param->file) {
-				fname = dwarf_decl_file(param->sp_die);
+				fname = die_get_decl_file(param->sp_die);
 				if (!fname || strtailcmp(param->file, fname))
 					return DWARF_CB_OK;
 			}
@@ -1750,7 +1750,7 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, u64 addr,
 			goto post;
 		}
 
-		fname = dwarf_decl_file(&spdie);
+		fname = die_get_decl_file(&spdie);
 		if (addr == baseaddr) {
 			/* Function entry - Relative line number is 0 */
 			lineno = baseline;
@@ -1787,7 +1787,7 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, u64 addr,
 			}
 		}
 		/* Verify the lineno and baseline are in a same file */
-		tmp = dwarf_decl_file(&spdie);
+		tmp = die_get_decl_file(&spdie);
 		if (!tmp || (fname && strcmp(tmp, fname) != 0))
 			lineno = 0;
 	}
@@ -1902,13 +1902,13 @@ static int line_range_search_cb(Dwarf_Die *sp_die, void *data)
 
 	/* Check declared file */
 	if (lr->file) {
-		fname = dwarf_decl_file(sp_die);
+		fname = die_get_decl_file(sp_die);
 		if (!fname || strtailcmp(lr->file, fname))
 			return DWARF_CB_OK;
 	}
 
 	if (die_match_name(sp_die, lr->function) && die_is_func_def(sp_die)) {
-		lf->fname = dwarf_decl_file(sp_die);
+		lf->fname = die_get_decl_file(sp_die);
 		dwarf_decl_line(sp_die, &lr->offset);
 		pr_debug("fname: %s, lineno:%d\n", lf->fname, lr->offset);
 		lf->lno_s = lr->offset + lr->start;
#4 lore raw

Re: [PATCH v2 3/3] tools/perf: Fix to get declared file name from clang DWARF5

Hi,

Am 01.11.22 um 14:48 schrieb Masami Hiramatsu (Google):

Quoted 5 lines

From: Masami Hiramatsu (Google) <[email protected]>

Fix to get the declared file name even if it uses file index 0 in DWARF5, using custom die_get_decl_file() function.

this patch breaks perf probe on fedora 38.

I was trying to a add a probe to systemd-logind using kernel-6.3.6-200.fc38.x86_64 with kernel-tools-6.3.3-200.fc38.x86_64.

When trying to add a probe, I get the following message:

# perf probe -x /usr/lib/systemd/systemd-logind --funcs="match_unit_removed"
match_unit_removed

Function exists and was found:

# perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
A function DIE doesn't have decl_line. Maybe broken DWARF?
A function DIE doesn't have decl_line. Maybe broken DWARF?
Probe point 'match_unit_removed' not found.
  Error: Failed to add events.

When reverting dc9a5d2ccd5c823cc05cafe75fcf19b682d8152c, I was able to add the probe point:

# ./perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
Added new event:
  probe_systemd:match_unit_removed (on match_unit_removed in /usr/lib/systemd/systemd-logind)

You can now use it in all perf tools, such as:

perf record -e probe_systemd:match_unit_removed -aR sleep 1

Probe point is then visible with and without this commit:

# perf probe -l
  probe_systemd:match_unit_removed (on match_unit_removed in /usr/lib/systemd/systemd-logind)
# ./perf probe -l
  probe_systemd:match_unit_removed (on match_unit_removed@../src/login/logind-dbus.c in /usr/lib/systemd/systemd-logind)

Best regards,
Georg

#5 lore raw

Re: [PATCH v2 3/3] tools/perf: Fix to get declared file name from clang DWARF5

[CCing the regression list, as it should be in the loop for regressions:
https://docs.kernel.org/admin-guide/reporting-regressions.html]

[TLDR: I'm adding this report to the list of tracked Linux kernel regressions; the text you find below is based on a few templates paragraphs you might have encountered already in similar form. See link in footer if these mails annoy you.]

Quoted 42 lines · Georg Müller

Am 01.11.22 um 14:48 schrieb Masami Hiramatsu (Google):

Quoted 5 lines

From: Masami Hiramatsu (Google) <[email protected]>

Fix to get the declared file name even if it uses file index 0 in DWARF5, using custom die_get_decl_file() function.

this patch breaks perf probe on fedora 38.

I was trying to a add a probe to systemd-logind using kernel-6.3.6-200.fc38.x86_64 with kernel-tools-6.3.3-200.fc38.x86_64.

When trying to add a probe, I get the following message:

# perf probe -x /usr/lib/systemd/systemd-logind
--funcs="match_unit_removed"
match_unit_removed

Function exists and was found:

# perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
A function DIE doesn't have decl_line. Maybe broken DWARF?
A function DIE doesn't have decl_line. Maybe broken DWARF?
Probe point 'match_unit_removed' not found.
  Error: Failed to add events.

When reverting dc9a5d2ccd5c823cc05cafe75fcf19b682d8152c, I was able to add the probe point:

# ./perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
Added new event:
  probe_systemd:match_unit_removed (on match_unit_removed in
/usr/lib/systemd/systemd-logind)

You can now use it in all perf tools, such as:

    perf record -e probe_systemd:match_unit_removed -aR sleep 1

Probe point is then visible with and without this commit:

Quoted 7 lines
# perf probe -l
  probe_systemd:match_unit_removed (on match_unit_removed in
/usr/lib/systemd/systemd-logind)
# ./perf probe -l
  probe_systemd:match_unit_removed (on
match_unit_removed@../src/login/logind-dbus.c in
/usr/lib/systemd/systemd-logind)

Thanks for the report. To be sure the issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression tracking bot:

#regzbot ^introduced dc9a5d2ccd5c823cc05cafe75fcf19b682d8152c #regzbot title tools/perf: adding a specific probe suddenly fails #regzbot ignore-activity

This isn't a regression? This issue or a fix for it are already discussed somewhere else? It was fixed already? You want to clarify when the regression started to happen? Or point out I got the title or something else totally wrong? Then just reply and tell me -- ideally while also telling regzbot about it, as explained by the page listed in the footer of this mail.

Developers: When fixing the issue, remember to add 'Link:' tags pointing to the report (the parent of this mail). See page linked in footer for details.

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) --
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.

#6 lore raw

Re: [PATCH v2 3/3] tools/perf: Fix to get declared file name from clang DWARF5

[TLDR: This mail in primarily relevant for Linux kernel regression tracking. See link in footer if these mails annoy you.]

Quoted 9 lines · Linux regression tracking #adding (Thorsten Leemhuis)
Quoted 8 lines · Georg Müller

Am 01.11.22 um 14:48 schrieb Masami Hiramatsu (Google):

Quoted 4 lines

From: Masami Hiramatsu (Google) <[email protected]>

Fix to get the declared file name even if it uses file index 0 in DWARF5, using custom die_get_decl_file() function.

this patch breaks perf probe on fedora 38.

#regzbot fix: c66e1c68c13b87250
#regzbot ignore-activity

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) --
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.

#7 lore raw

Re: [PATCH v2 3/3] tools/perf: Fix to get declared file name from clang DWARF5

In reply to Georg Müller

Hi all,

I have found a solution for this bug and will post a patch later today.

Am 09.06.23 um 14:21 schrieb Georg Müller:

Quoted 10 lines

Am 01.11.22 um 14:48 schrieb Masami Hiramatsu (Google):

Quoted 5 lines

From: Masami Hiramatsu (Google) <[email protected]>

Fix to get the declared file name even if it uses file index 0 in DWARF5, using custom die_get_decl_file() function.

this patch breaks perf probe on fedora 38.

The problem is that die_get_file_name() uses the wrong cu_die.

I was pointed to the solution by reading elfutils commit e1db5cdc9:

dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file attribute. This means the attribute might come from a different DIE in a different CU. If so, we need to use the CU associated with the attribute, not the original DIE, to resolve the file name.

The correct cu_die has to be obtained via

dwarf_attr_integrate(dw_die, DW_AT_decl_file, &attr_mem)

and then cu_die from the cu from attr_mem (dwarf_cu_die(attr_mem.cu, &cu_die, ...) to obtain it) has to be used.

Best regards,
Georg

#8 lore raw

PATCH 1/1 perf probe: read DWARF files from the correct CU

In reply to Georg Müller

After switching from dwarf_decl_file() to die_get_decl_file(), it is not possible to add probes for certain functions of certain binaries:

 $ perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
 A function DIE doesn't have decl_line. Maybe broken DWARF?
 A function DIE doesn't have decl_line. Maybe broken DWARF?
 Probe point 'match_unit_removed' not found.
    Error: Failed to add events.

The problem is that die_get_decl_file() uses the wrong CU to search for the file. elfutils commit e1db5cdc9f has some good explanation for this:

dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file attribute. This means the attribute might come from a different DIE in a different CU. If so, we need to use the CU associated with the attribute, not the original DIE, to resolve the file name.

This patch uses the same source of information as elfutils: use attribute DW_AT_decl_file and use this CU to search for the file.

Fixes dc9a5d2ccd5c ("perf probe: Fix to get declared file name from clang DWARF5")
---
 tools/perf/util/dwarf-aux.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/util/dwarf-aux.c +3 -1
index b07414409771..137b3ed9897b 100644
@@ -478,8 +478,10 @@ static const char *die_get_file_name(Dwarf_Die *dw_die, int idx)
 {
 	Dwarf_Die cu_die;
 	Dwarf_Files *files;
+	Dwarf_Attribute attr_mem;
 
-	if (idx < 0 || !dwarf_diecu(dw_die, &cu_die, NULL, NULL) ||
+	if (idx < 0 || !dwarf_attr_integrate(dw_die, DW_AT_decl_file, &attr_mem) ||
+	    !dwarf_cu_die(attr_mem.cu, &cu_die, NULL, NULL, NULL, NULL, NULL, NULL) ||
 	    dwarf_getsrcfiles(&cu_die, &files, NULL) != 0)
 		return NULL;
 

--
2.41.0

#9 lore raw

Re: [PATCH] perf probe: read DWARF files from the correct CU

Hi,

Am 15.06.23 um 22:01 schrieb Georg Müller:

Quoted 44 lines

After switching from dwarf_decl_file() to die_get_decl_file(), it is not possible to add probes for certain functions of certain binaries:

  $ perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
  A function DIE doesn't have decl_line. Maybe broken DWARF?
  A function DIE doesn't have decl_line. Maybe broken DWARF?
  Probe point 'match_unit_removed' not found.
     Error: Failed to add events.

The problem is that die_get_decl_file() uses the wrong CU to search for the file. elfutils commit e1db5cdc9f has some good explanation for this:

dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file attribute. This means the attribute might come from a different DIE in a different CU. If so, we need to use the CU associated with the attribute, not the original DIE, to resolve the file name.

This patch uses the same source of information as elfutils: use attribute DW_AT_decl_file and use this CU to search for the file.

Fixes dc9a5d2ccd5c ("perf probe: Fix to get declared file name from clang DWARF5")
---
  tools/perf/util/dwarf-aux.c | 4 +++-
  1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/util/dwarf-aux.c +3 -2
index b07414409771..137b3ed9897b 100644
@@ -478,8 +478,10 @@ static const char *die_get_file_name(Dwarf_Die *dw_die, int idx)
  {
  	Dwarf_Die cu_die;
  	Dwarf_Files *files;
+	Dwarf_Attribute attr_mem;
 
-	if (idx < 0 || !dwarf_diecu(dw_die, &cu_die, NULL, NULL) ||
+	if (idx < 0 || !dwarf_attr_integrate(dw_die, DW_AT_decl_file, &attr_mem) ||
+	    !dwarf_cu_die(attr_mem.cu, &cu_die, NULL, NULL, NULL, NULL, NULL, NULL) ||
  	    dwarf_getsrcfiles(&cu_die, &files, NULL) != 0)
  		return NULL;
 
--
Quoted 2 lines

2.41.0

Just a question regarding the patch:
Should I also add a testcase to show the issue or is this enough? It can be reproduced quite simple with two .c files and one .h file, the same test as the one added in elfutils with commit e1db5cdc9f, compiled with the same three steps as in the comment of the shell script, but without "-flto":

https://sourceware.org/git/?p=elfutils.git;a=commitdiff;h=e1db5cdc9f230f8de4df1a0f38dca69b283ee57a

Best regards,
Georg

maintainer Applied
#10 lore raw

Re: [PATCH] perf probe: read DWARF files from the correct CU

In reply to Georg Müller

Em Thu, Jun 15, 2023 at 10:01:37PM +0200, Georg Müller escreveu:

Quoted 12 lines

After switching from dwarf_decl_file() to die_get_decl_file(), it is not possible to add probes for certain functions of certain binaries:

 $ perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
 A function DIE doesn't have decl_line. Maybe broken DWARF?
 A function DIE doesn't have decl_line. Maybe broken DWARF?
 Probe point 'match_unit_removed' not found.
    Error: Failed to add events.

The problem is that die_get_decl_file() uses the wrong CU to search for the file. elfutils commit e1db5cdc9f has some good explanation for this:

Quoted 7 lines

dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file attribute. This means the attribute might come from a different DIE in a different CU. If so, we need to use the CU associated with the attribute, not the original DIE, to resolve the file name.

This patch uses the same source of information as elfutils: use attribute DW_AT_decl_file and use this CU to search for the file.

Thanks, applied to the perf-tools branch, that will be submitted for Linux v6.5.

- Arnaldo

Quoted 26 lines
Fixes dc9a5d2ccd5c ("perf probe: Fix to get declared file name from clang DWARF5")
---
 tools/perf/util/dwarf-aux.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/util/dwarf-aux.c +3 -2
index b07414409771..137b3ed9897b 100644
@@ -478,8 +478,10 @@ static const char *die_get_file_name(Dwarf_Die *dw_die, int idx)
 {
 	Dwarf_Die cu_die;
 	Dwarf_Files *files;
+	Dwarf_Attribute attr_mem;
 
-	if (idx < 0 || !dwarf_diecu(dw_die, &cu_die, NULL, NULL) ||
+	if (idx < 0 || !dwarf_attr_integrate(dw_die, DW_AT_decl_file, &attr_mem) ||
+	    !dwarf_cu_die(attr_mem.cu, &cu_die, NULL, NULL, NULL, NULL, NULL, NULL) ||
 	    dwarf_getsrcfiles(&cu_die, &files, NULL) != 0)
 		return NULL;
 
--

2.41.0

Signature · 1 line
- Arnaldo
#11 lore raw

Re: [PATCH] perf probe: read DWARF files from the correct CU

Quoted 18 lines · On Tue, 11 Jul 2023 09:57:45 -0300 Arnaldo Carvalho de Melo <[email protected]>…

Em Thu, Jun 15, 2023 at 10:01:37PM +0200, Georg Müller escreveu:

Quoted 17 lines

After switching from dwarf_decl_file() to die_get_decl_file(), it is not possible to add probes for certain functions of certain binaries:

 $ perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
 A function DIE doesn't have decl_line. Maybe broken DWARF?
 A function DIE doesn't have decl_line. Maybe broken DWARF?
 Probe point 'match_unit_removed' not found.
    Error: Failed to add events.

The problem is that die_get_decl_file() uses the wrong CU to search for the file. elfutils commit e1db5cdc9f has some good explanation for this:

dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file attribute. This means the attribute might come from a different DIE in a different CU. If so, we need to use the CU associated with the attribute, not the original DIE, to resolve the file name.

Quoted 5 lines
Quoted 2 lines

This patch uses the same source of information as elfutils: use attribute DW_AT_decl_file and use this CU to search for the file.

Thanks, applied to the perf-tools branch, that will be submitted for Linux v6.5.

Thanks Arnaldo and Georg,

It sounds perfect reason why that happened. I didn't expect the case that the attribute comes from another CU...

Quoted 33 lines

- Arnaldo

Quoted 26 lines
Fixes dc9a5d2ccd5c ("perf probe: Fix to get declared file name from clang DWARF5")
---
 tools/perf/util/dwarf-aux.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/util/dwarf-aux.c +3 -2
index b07414409771..137b3ed9897b 100644
@@ -478,8 +478,10 @@ static const char *die_get_file_name(Dwarf_Die *dw_die, int idx)
 {
 	Dwarf_Die cu_die;
 	Dwarf_Files *files;
+	Dwarf_Attribute attr_mem;
 
-	if (idx < 0 || !dwarf_diecu(dw_die, &cu_die, NULL, NULL) ||
+	if (idx < 0 || !dwarf_attr_integrate(dw_die, DW_AT_decl_file, &attr_mem) ||
+	    !dwarf_cu_die(attr_mem.cu, &cu_die, NULL, NULL, NULL, NULL, NULL, NULL) ||
 	    dwarf_getsrcfiles(&cu_die, &files, NULL) != 0)
 		return NULL;
 
--

2.41.0

Signature · 1 line
- Arnaldo
Signature · 1 line
Masami Hiramatsu (Google) <[email protected]>
#12 lore raw

Re: [PATCH] perf probe: read DWARF files from the correct CU

Em Tue, Jul 11, 2023 at 10:20:00PM +0900, Masami Hiramatsu escreveu:

Quoted 16 lines · On Tue, 11 Jul 2023 09:57:45 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Quoted 9 lines

Em Thu, Jun 15, 2023 at 10:01:37PM +0200, Georg Müller escreveu:

Quoted 8 lines

The problem is that die_get_decl_file() uses the wrong CU to search for the file. elfutils commit e1db5cdc9f has some good explanation for this:

dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file attribute. This means the attribute might come from a different DIE in a different CU. If so, we need to use the CU associated with the attribute, not the original DIE, to resolve the file name.

Quoted 5 lines
Quoted 2 lines

This patch uses the same source of information as elfutils: use attribute DW_AT_decl_file and use this CU to search for the file.

Thanks, applied to the perf-tools branch, that will be submitted for Linux v6.5.

Quoted 6 lines

Thanks Arnaldo and Georg,

It sounds perfect reason why that happened. I didn't expect the case that the attribute comes from another CU...

Thanks, added it to the cset.

- Arnaldo

#13 lore raw

v2 cover perf probe: fix regression introduced by switch to die_get_decl_file

In reply to Georg Müller

When switching from dwarf_decl_file() to die_get_decl_file(), a regression was introduced when having a binary where the DWARF info is split to multiple CUs. It is not possible to add probes to certain functions.

These patches introduce a testcase which shows the current regression and a fix for the issue

---
Changes in v2:
- Add testcase

Georg Müller (2):
perf probe: add test for regression introduced by switch to
die_get_decl_file
perf probe: read DWARF files from the correct CU

 .../shell/test_uprobe_from_different_cu.sh    | 77 +++++++++++++++++++
 tools/perf/util/dwarf-aux.c                   |  4 +-
 2 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100755 tools/perf/tests/shell/test_uprobe_from_different_cu.sh

--
2.41.0

#14 lore raw

PATCH v2 1/2 perf probe: add test for regression introduced by switch to die_get_decl_file

This patch adds a test to validate that perf probe works for binaries where DWARF info is split into multiple CUs

---
 .../shell/test_uprobe_from_different_cu.sh    | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100755 tools/perf/tests/shell/test_uprobe_from_different_cu.sh
tools/perf/tests/shell/test_uprobe_from_different_cu.sh new file +77 -0
new file mode 100755
index 000000000000..00d2e0e2e0c2
@@ -0,0 +1,77 @@
+#!/bin/bash
+# test perf probe of function from different CU
+# SPDX-License-Identifier: GPL-2.0
+
+set -e
+
+temp_dir=$(mktemp -d /tmp/perf-uprobe-different-cu-sh.XXXXXXXXXX)
+
+cleanup()
+{
+	trap - EXIT TERM INT
+	if [[ "${temp_dir}" =~ ^/tmp/perf-uprobe-different-cu-sh.*$ ]]; then
+		echo "--- Cleaning up ---"
+		perf probe -x ${temp_dir}/testfile -d foo
+		rm -f "${temp_dir}/"*
+		rmdir "${temp_dir}"
+	fi
+}
+
+trap_cleanup()
+{
+        cleanup
+        exit 1
+}
+
+trap trap_cleanup EXIT TERM INT
+
+cat > ${temp_dir}/testfile-foo.h << EOF
+struct t
+{
+  int *p;
+  int c;
+};
+
+extern int foo (int i, struct t *t);
+EOF
+
+cat > ${temp_dir}/testfile-foo.c << EOF
+#include "testfile-foo.h"
+
+int
+foo (int i, struct t *t)
+{
+  int j, res = 0;
+  for (j = 0; j < i && j < t->c; j++)
+    res += t->p[j];
+
+  return res;
+}
+EOF
+
+cat > ${temp_dir}/testfile-main.c << EOF
+#include "testfile-foo.h"
+
+static struct t g;
+
+int
+main (int argc, char **argv)
+{
+  int i;
+  int j[argc];
+  g.c = argc;
+  g.p = j;
+  for (i = 0; i < argc; i++)
+    j[i] = (int) argv[i][0];
+  return foo (3, &g);
+}
+EOF
+
+gcc -g -Og -flto -c ${temp_dir}/testfile-foo.c -o ${temp_dir}/testfile-foo.o
+gcc -g -Og -c ${temp_dir}/testfile-main.c -o ${temp_dir}/testfile-main.o
+gcc -g -Og -o ${temp_dir}/testfile ${temp_dir}/testfile-foo.o ${temp_dir}/testfile-main.o
+
+perf probe -x ${temp_dir}/testfile --funcs foo
+perf probe -x ${temp_dir}/testfile foo
+
+cleanup

--
2.41.0

reviewer
#15 lore raw

Re: [PATCH v2 1/2] perf probe: add test for regression introduced by switch to die_get_decl_file

Quoted 79 lines · Georg Müller

This patch adds a test to validate that perf probe works for binaries where DWARF info is split into multiple CUs

---
 .../shell/test_uprobe_from_different_cu.sh    | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100755 tools/perf/tests/shell/test_uprobe_from_different_cu.sh
tools/perf/tests/shell/test_uprobe_from_different_cu.sh new file +62 -0
new file mode 100755
index 000000000000..00d2e0e2e0c2
@@ -0,0 +1,77 @@
+#!/bin/bash
+# test perf probe of function from different CU
+# SPDX-License-Identifier: GPL-2.0
+
+set -e
+
+temp_dir=$(mktemp -d /tmp/perf-uprobe-different-cu-sh.XXXXXXXXXX)
+
+cleanup()
+{
+       trap - EXIT TERM INT
+       if [[ "${temp_dir}" =~ ^/tmp/perf-uprobe-different-cu-sh.*$ ]]; then
+               echo "--- Cleaning up ---"
+               perf probe -x ${temp_dir}/testfile -d foo
+               rm -f "${temp_dir}/"*
+               rmdir "${temp_dir}"
+       fi
+}
+
+trap_cleanup()
+{
+        cleanup
+        exit 1
+}
+
+trap trap_cleanup EXIT TERM INT
+
+cat > ${temp_dir}/testfile-foo.h << EOF
+struct t
+{
+  int *p;
+  int c;
+};
+
+extern int foo (int i, struct t *t);
+EOF
+
+cat > ${temp_dir}/testfile-foo.c << EOF
+#include "testfile-foo.h"
+
+int
+foo (int i, struct t *t)
+{
+  int j, res = 0;
+  for (j = 0; j < i && j < t->c; j++)
+    res += t->p[j];
+
+  return res;
+}
+EOF
+
+cat > ${temp_dir}/testfile-main.c << EOF
+#include "testfile-foo.h"
+
+static struct t g;
+
+int
+main (int argc, char **argv)
+{
+  int i;
+  int j[argc];
+  g.c = argc;

tools/perf/tests/shell/test_uprobe_from_different_cu.sh line 72

Quoted 10 lines
tools/perf/tests/shell/test_uprobe_from_different_cu.sh new file +10 -0
+  g.p = j;
+  for (i = 0; i < argc; i++)
+    j[i] = (int) argv[i][0];
+  return foo (3, &g);
+}
+EOF
+
+gcc -g -Og -flto -c ${temp_dir}/testfile-foo.c -o ${temp_dir}/testfile-foo.o
+gcc -g -Og -c ${temp_dir}/testfile-main.c -o ${temp_dir}/testfile-main.o
+gcc -g -Og -o ${temp_dir}/testfile ${temp_dir}/testfile-foo.o ${temp_dir}/testfile-main.o

Thanks for the test Georg! By directly relying on gcc this test fails for me in some constrained environments, like containers. I think there should be a skip if gcc isn't present. A different option is to just build the test code into the perf binary itself as a test workload:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/tests/workloads?h=perf-tools-next

Wdyt? Thanks,
Ian

Quoted 8 lines
tools/perf/tests/shell/test_uprobe_from_different_cu.sh new file +5 -1
+
+perf probe -x ${temp_dir}/testfile --funcs foo
+perf probe -x ${temp_dir}/testfile foo
+
+cleanup
--

2.41.0

#16 lore raw

Re: [PATCH v2 1/2] perf probe: add test for regression introduced by switch to die_get_decl_file

Am 27.07.23 um 19:45 schrieb Ian Rogers:

Quoted 9 lines · Georg Müller

Thanks for the test Georg! By directly relying on gcc this test fails for me in some constrained environments, like containers. I think there should be a skip if gcc isn't present. A different option is to just build the test code into the perf binary itself as a test workload:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/tests/workloads?h=perf-tools-next

Quoted 3 lines

Wdyt? Thanks,
Ian

I prepare a commit which checks for gcc and skips the test in this case.

I think building thi test code into the perf binary itself is not an option here, since the test relies on a special setup of using -flto for one of the compilation units.

There is also a cleanup issue if anything fails. This will be included in the patch as well.

Best regards,
Georg

#17 lore raw

PATCH v2 2/2 perf probe: read DWARF files from the correct CU

In reply to Georg Müller

After switching from dwarf_decl_file() to die_get_decl_file(), it is not possible to add probes for certain functions:

 $ perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
 A function DIE doesn't have decl_line. Maybe broken DWARF?
 A function DIE doesn't have decl_line. Maybe broken DWARF?
 Probe point 'match_unit_removed' not found.
    Error: Failed to add events.

The problem is that die_get_decl_file() uses the wrong CU to search for the file. elfutils commit e1db5cdc9f has some good explanation for this:

dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file attribute. This means the attribute might come from a different DIE in a different CU. If so, we need to use the CU associated with the attribute, not the original DIE, to resolve the file name.

This patch uses the same source of information as elfutils: use attribute DW_AT_decl_file and use this CU to search for the file.

Fixes dc9a5d2ccd5c ("perf probe: Fix to get declared file name from clang DWARF5")
---
 tools/perf/util/dwarf-aux.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/util/dwarf-aux.c +3 -1
index b07414409771..137b3ed9897b 100644
@@ -478,8 +478,10 @@ static const char *die_get_file_name(Dwarf_Die *dw_die, int idx)
 {
 	Dwarf_Die cu_die;
 	Dwarf_Files *files;
+	Dwarf_Attribute attr_mem;
 
-	if (idx < 0 || !dwarf_diecu(dw_die, &cu_die, NULL, NULL) ||
+	if (idx < 0 || !dwarf_attr_integrate(dw_die, DW_AT_decl_file, &attr_mem) ||
+	    !dwarf_cu_die(attr_mem.cu, &cu_die, NULL, NULL, NULL, NULL, NULL, NULL) ||
 	    dwarf_getsrcfiles(&cu_die, &files, NULL) != 0)
 		return NULL;
 

--
2.41.0

#18 lore raw

Re: [PATCH v2 0/2] perf probe: fix regression introduced by switch to die_get_decl_file

In reply to Georg Müller
Quoted 9 lines · Georg Müller

When switching from dwarf_decl_file() to die_get_decl_file(), a regression was introduced when having a binary where the DWARF info is split to multiple CUs. It is not possible to add probes to certain functions.

These patches introduce a testcase which shows the current regression and a fix for the issue

FWIW, you in both commits might want to add a

to ensure the fix is backported to appropriate releases (e.g. 6.4 and 6.3, if the latter doesn't go EOL earlier).

Ciao, Thorsten

P.S.: Some (I guess: most) maintainers prefer if patch series are startet as new threads

maintainer Acked-by on the v2 series
#19 lore raw
In reply to Masami Hiramatsu (Google)

Hi Masami,

Quoted 41 lines · Masami Hiramatsu (Google)

Hi,

Here is the 2nd version of the patches for perf probe which improves the robustness against clang DWARF5 file.

Since the Clang generates a bit different DWARF5 file, the perf probe crashes or failes to analyze it. There are actually fragile code against it, so I fixed it ([1/3]) to avoid crash by SEGV. And make it accepts Clang's DWARF5 file ([2/3],[3/3]).

Without this series, the perf probe crashes with the DWARF5 file which generated by clang as below;

  $ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
  Segmentation fault

This series fixes it to handle such file correctly;

  $ ./perf probe -k $BIN_PATH/vmlinux -s $SRC_PATH -L vfs_read:10
  <vfs_read@$SRC_PATH/fs/read_write.c:10>
       11         ret = rw_verify_area(READ, file, pos, count);
       12         if (ret)
                           return ret;

On the DWARF5 specification, Sec 2.14, there is
"The value 0 indicates that no source file has been specified." for DW_AT_decl_file, but clang generated DWARF5 will use the value 0.

This issue is discussed on DWARF std ML;
https://www.mail-archive.com/[email protected]/msg00884.html

And suggested that removing this part from the specification.
http://wiki.dwarfstd.org/index.php?title=DWARF5_Line_Table_File_Numbers

So as far as I understand, this is out of standard at this moment, but the standard itself has a discussion on this part. And maybe updated as currently clang does in the next release/revision.

Quoted 8 lines

Thank you,

---

Masami Hiramatsu (Google) (3):
tools/perf: Fix to avoid crashing if DW_AT_decl_file is NULL tools/perf: Fix to use dwarf_attr_integrate for generic attr accessor tools/perf: Fix to get declared file name from clang DWARF5

Thanks,
Namhyung

Quoted 9 lines

 tools/perf/util/dwarf-aux.c    |   58 ++++++++++++++++++++++++++++------------
 tools/perf/util/dwarf-aux.h    |    3 ++
 tools/perf/util/probe-finder.c |   37 +++++++++++++++++---------
 3 files changed, 68 insertions(+), 30 deletions(-)

--
Masami Hiramatsu (Google) <[email protected]>

maintainer Applied
#20 lore raw

Em Tue, Nov 01, 2022 at 05:03:51PM -0700, Namhyung Kim escreveu:

Quoted 10 lines
Quoted 7 lines · Masami Hiramatsu (Google)

Here is the 2nd version of the patches for perf probe which improves the robustness against clang DWARF5 file.

Since the Clang generates a bit different DWARF5 file, the perf probe crashes or failes to analyze it. There are actually fragile code against it, so I fixed it ([1/3]) to avoid crash by SEGV. And make it accepts Clang's DWARF5 file ([2/3],[3/3]).

Quoted 6 lines
Quoted 4 lines

Masami Hiramatsu (Google) (3):
tools/perf: Fix to avoid crashing if DW_AT_decl_file is NULL tools/perf: Fix to use dwarf_attr_integrate for generic attr accessor tools/perf: Fix to get declared file name from clang DWARF5

Thanks, applied.

- Arnaldo