Skip to contentSkip to conversation

wifi: rtw89: 8852b: change debug mask of message of no TX resource

PATCH In review Ping-Ke Shih 2 participants 3 messages Nov 8, 2022 – Nov 9, 2022 Realtek wireless driver (rtw89)

lore
Share & tools
lore

Ping-Ke Shih

author maintainer
#0 lore raw

PATCH v2 1/1 wifi: rtw89: 8852b: change debug mask of message of no TX resource

8852B has smaller TX FIFO than others in WiFi chip, so it would be buffer full frequently, but it doesn't affect TX performance. However, it shows verbose debug messages with RTW89_DBG_UNEXP mask that is used to indicate abnormal behavior, so change debug mask to RTW89_DBG_TXRX for 8852B.

---
 drivers/net/wireless/realtek/rtw89/pci.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/net/wireless/realtek/rtw89/pci.c +14 -2
index 07a2e23759f0b..7aa0af18cdd50 100644
@@ -971,8 +971,10 @@ static u32 __rtw89_pci_check_and_reclaim_tx_resource(struct rtw89_dev *rtwdev,
 	struct rtw89_pci *rtwpci = (struct rtw89_pci *)rtwdev->priv;
 	struct rtw89_pci_tx_ring *tx_ring = &rtwpci->tx_rings[txch];
 	struct rtw89_pci_tx_wd_ring *wd_ring = &tx_ring->wd_ring;
+	const struct rtw89_chip_info *chip = rtwdev->chip;
 	u32 bd_cnt, wd_cnt, min_cnt = 0;
 	struct rtw89_pci_rx_ring *rx_ring;
+	enum rtw89_debug_mask debug_mask;
 	u32 cnt;
 
 	rx_ring = &rtwpci->rx_rings[RTW89_RXCH_RPQ];
@@ -996,10 +998,20 @@ static u32 __rtw89_pci_check_and_reclaim_tx_resource(struct rtw89_dev *rtwdev,
 	bd_cnt = rtw89_pci_get_avail_txbd_num(tx_ring);
 	wd_cnt = wd_ring->curr_num;
 	min_cnt = min(bd_cnt, wd_cnt);
-	if (min_cnt == 0)
-		rtw89_debug(rtwdev, rtwpci->low_power ? RTW89_DBG_TXRX : RTW89_DBG_UNEXP,
+	if (min_cnt == 0) {
+		/* This message can be frequently shown in low power mode or
+		 * high traffic with 8852B, and we have recognized it as normal
+		 * behavior, so print with mask RTW89_DBG_TXRX in these situations.
+		 */
+		if (rtwpci->low_power || chip->chip_id == RTL8852B)
+			debug_mask = RTW89_DBG_TXRX;
+		else
+			debug_mask = RTW89_DBG_UNEXP;
+
+		rtw89_debug(rtwdev, debug_mask,
 			    "still no tx resource after reclaim: wd_cnt=%d bd_cnt=%d\n",
 			    wd_cnt, bd_cnt);
+	}
 
 out_unlock:
 	spin_unlock_bh(&rtwpci->trx_lock);
Signature · 1 line
2.25.1
author maintainer
#1 lore raw
Quoted 9 lines

-----Original Message-----
From: Ping-Ke Shih <[email protected]>
Sent: Tuesday, November 8, 2022 9:43 AM
To: [email protected]
Cc: [email protected]
Subject: [PATCH v2] wifi: rtw89: 8852b: change debug mask of message of no TX resource

Quoted 6 lines

8852B has smaller TX FIFO than others in WiFi chip, so it would be buffer full frequently, but it doesn't affect TX performance. However, it shows verbose debug messages with RTW89_DBG_UNEXP mask that is used to indicate abnormal behavior, so change debug mask to RTW89_DBG_TXRX for 8852B.

Sorry, I forget to add changelog of v2.

v2: add comment to explain why we change debug mask for certain situations.

Quoted 47 lines
---
 drivers/net/wireless/realtek/rtw89/pci.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/net/wireless/realtek/rtw89/pci.c +14 -3
index 07a2e23759f0b..7aa0af18cdd50 100644
@@ -971,8 +971,10 @@ static u32 __rtw89_pci_check_and_reclaim_tx_resource(struct rtw89_dev *rtwdev,
 	struct rtw89_pci *rtwpci = (struct rtw89_pci *)rtwdev->priv;
 	struct rtw89_pci_tx_ring *tx_ring = &rtwpci->tx_rings[txch];
 	struct rtw89_pci_tx_wd_ring *wd_ring = &tx_ring->wd_ring;
+	const struct rtw89_chip_info *chip = rtwdev->chip;
 	u32 bd_cnt, wd_cnt, min_cnt = 0;
 	struct rtw89_pci_rx_ring *rx_ring;
+	enum rtw89_debug_mask debug_mask;
 	u32 cnt;
 
 	rx_ring = &rtwpci->rx_rings[RTW89_RXCH_RPQ];
@@ -996,10 +998,20 @@ static u32 __rtw89_pci_check_and_reclaim_tx_resource(struct rtw89_dev *rtwdev,
 	bd_cnt = rtw89_pci_get_avail_txbd_num(tx_ring);
 	wd_cnt = wd_ring->curr_num;
 	min_cnt = min(bd_cnt, wd_cnt);
-	if (min_cnt == 0)
-		rtw89_debug(rtwdev, rtwpci->low_power ? RTW89_DBG_TXRX : RTW89_DBG_UNEXP,
+	if (min_cnt == 0) {
+		/* This message can be frequently shown in low power mode or
+		 * high traffic with 8852B, and we have recognized it as normal
+		 * behavior, so print with mask RTW89_DBG_TXRX in these situations.
+		 */
+		if (rtwpci->low_power || chip->chip_id == RTL8852B)
+			debug_mask = RTW89_DBG_TXRX;
+		else
+			debug_mask = RTW89_DBG_UNEXP;
+
+		rtw89_debug(rtwdev, debug_mask,
 			    "still no tx resource after reclaim: wd_cnt=%d bd_cnt=%d\n",
 			    wd_cnt, bd_cnt);
+	}
 
 out_unlock:
 	spin_unlock_bh(&rtwpci->trx_lock);
--

2.25.1

------Please consider the environment before printing this e-mail.

#2 lore raw
In reply to Ping-Ke Shih
Quoted 6 lines · Ping-Ke Shih

8852B has smaller TX FIFO than others in WiFi chip, so it would be buffer full frequently, but it doesn't affect TX performance. However, it shows verbose debug messages with RTW89_DBG_UNEXP mask that is used to indicate abnormal behavior, so change debug mask to RTW89_DBG_TXRX for 8852B.

Patch applied to wireless-next.git, thanks.

901c247f9687 wifi: rtw89: 8852b: change debug mask of message of no TX resource

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches