HDA patch_via.c: Change PW4 connect select default to to MW0.
PATCH 29/31 HDA patch_via.c: Change PW4 connect select default to to MW0.
[ALSA] HDA VIA: Change PW4 connect select default to to MW0.
According to customer request, hp should be default to redirected mode, i.e. PW4 connect select default to to MW0.
, i.e. PW4 should be default to MW0.
Signed-off-by Lydia Wang <[email protected]>
sound/pci/hda/patch_via.c +5 -5
@@ -1505,8 +1505,8 @@ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, -/* Setup default input to PW4 */ - {0x20, AC_VERB_SET_CONNECT_SEL, 0x1}, +/* Setup default input MW0 to PW4 */ + {0x20, AC_VERB_SET_CONNECT_SEL, 0},/* PW9 Output enable */ {0x25, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, /* power down jack detect function */
@@ -2641,8 +2641,8 @@ {0x1f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, -/* Set input of PW4 as AOW4 */ - {0x20, AC_VERB_SET_CONNECT_SEL, 0x1}, +/* Set input of PW4 as MW0 */ + {0x20, AC_VERB_SET_CONNECT_SEL, 0},/* PW9 Output enable */ {0x24, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, { }
@@ -3196,7 +3196,7 @@ {0x27, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},/* Setup default input to PW4 */ - {0x1d, AC_VERB_SET_CONNECT_SEL, 0x1}, + {0x1d, AC_VERB_SET_CONNECT_SEL, 0},/* PW9 Output enable */ {0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},/* PW10 Input enable */
[ALSA] HDA VIA: Change PW4 connect select default to to MW0.
According to customer request, hp should be default to redirected mode, i.e. PW4 connect select default to to MW0.
, i.e. PW4 should be default to MW0.
Signed-off-by Lydia Wang <[email protected]>
--- sound/pci/hda/patch_via.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
sound/pci/hda/patch_via.c +5 -5
@@ -1538,8 +1538,8 @@ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, -/* Setup default input to PW4 */ - {0x20, AC_VERB_SET_CONNECT_SEL, 0x1}, +/* Setup default input MW0 to PW4 */ + {0x20, AC_VERB_SET_CONNECT_SEL, 0},/* PW9 Output enable */ {0x25, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, { }
@@ -2683,8 +2683,8 @@ {0x1f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, -/* Set input of PW4 as AOW4 */ - {0x20, AC_VERB_SET_CONNECT_SEL, 0x1}, +/* Set input of PW4 as MW0 */ + {0x20, AC_VERB_SET_CONNECT_SEL, 0},/* PW9 Output enable */ {0x24, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, { }
@@ -3237,7 +3237,7 @@ {0x27, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},/* Setup default input to PW4 */ - {0x1d, AC_VERB_SET_CONNECT_SEL, 0x1}, + {0x1d, AC_VERB_SET_CONNECT_SEL, 0},/* PW9 Output enable */ {0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},/* PW10 Input enable */