ACPI table release for TPM drivers

The start and length of the event log area are obtained from TPM2 or TCPA table, so we call acpi_get_table() to get the ACPI information, but the acpi_get_table() should be coupled with acpi_put_table() to release the ACPI memory, add the acpi_put_table() properly to fix the memory leak.

While we are at it, remove the redundant empty line at the end of the tpm_read_log_acpi().

Fixes 0bfb23746052 ("tpm: Move eventlog files to a subdirectory")

Fixes 85467f63a05c ("tpm: Add support for event log pointer found in TPM2 ACPI table")

Cc [email protected]

Signed-off-by Hanjun Guo <[email protected]>

---
 drivers/char/tpm/eventlog/acpi.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

drivers/char/tpm/eventlog/acpi.c +9 -3

index 1b18ce5..0913d3eb 100644
@@ -90,16 +90,21 @@ int tpm_read_log_acpi(struct tpm_chip *chip)
 			return -ENODEV;
 
 		if (tbl->header.length <
-				sizeof(*tbl) + sizeof(struct acpi_tpm2_phy))
+				sizeof(*tbl) + sizeof(struct acpi_tpm2_phy)) {
+			acpi_put_table((struct acpi_table_header *)tbl);
 			return -ENODEV;
+		}
 
 		tpm2_phy = (void *)tbl + sizeof(*tbl);
 		len = tpm2_phy->log_area_minimum_length;
 
 		start = tpm2_phy->log_area_start_address;
-		if (!start || !len)
+		if (!start || !len) {
+			acpi_put_table((struct acpi_table_header *)tbl);
 			return -ENODEV;
+		}
 
+		acpi_put_table((struct acpi_table_header *)tbl);
 		format = EFI_TCG2_EVENT_LOG_FORMAT_TCG_2;
 	} else {
 		/* Find TCPA entry in RSDT (ACPI_LOGICAL_ADDRESSING) */

@@ -120,8 +125,10 @@ int tpm_read_log_acpi(struct tpm_chip *chip)
 			break;
 		}
 
+		acpi_put_table((struct acpi_table_header *)buff);
 		format = EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2;
 	}
+
 	if (!len) {
 		dev_warn(&chip->dev, "%s: TCPA log area empty\n", __func__);
 		return -EIO;

@@ -156,5 +163,4 @@ int tpm_read_log_acpi(struct tpm_chip *chip)
 	kfree(log->bios_event_log);
 	log->bios_event_log = NULL;
 	return ret;
-
 }

Signature · 1 line

1.7.12.4

In crb_acpi_add(), we get the TPM2 table to retrieve information like start method, and then assign them to the priv data, so the TPM2 table is not used after the init, should be freed, call acpi_put_table() to fix the memory leak.

Fixes 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")

Cc [email protected]

Signed-off-by Hanjun Guo <[email protected]>

---
 drivers/char/tpm/tpm_crb.c | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

drivers/char/tpm/tpm_crb.c +20 -9

index 1860665..5bfb00f 100644
@@ -676,12 +676,16 @@ static int crb_acpi_add(struct acpi_device *device)
 
 	/* Should the FIFO driver handle this? */
 	sm = buf->start_method;
-	if (sm == ACPI_TPM2_MEMORY_MAPPED)
-		return -ENODEV;
+	if (sm == ACPI_TPM2_MEMORY_MAPPED) {
+		rc = -ENODEV;
+		goto out;
+	}
 
 	priv = devm_kzalloc(dev, sizeof(struct crb_priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
+	if (!priv) {
+		rc = -ENOMEM;
+		goto out;
+	}
 
 	if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) {
 		if (buf->header.length < (sizeof(*buf) + sizeof(*crb_smc))) {

@@ -689,7 +693,8 @@ static int crb_acpi_add(struct acpi_device *device)
 				FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n",
 				buf->header.length,
 				ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC);
-			return -EINVAL;
+			rc = -EINVAL;
+			goto out;
 		}
 		crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf, sizeof(*buf));
 		priv->smc_func_id = crb_smc->smc_func_id;

@@ -700,17 +705,23 @@ static int crb_acpi_add(struct acpi_device *device)
 
 	rc = crb_map_io(device, priv, buf);
 	if (rc)
-		return rc;
+		goto out;
 
 	chip = tpmm_chip_alloc(dev, &tpm_crb);
-	if (IS_ERR(chip))
-		return PTR_ERR(chip);
+	if (IS_ERR(chip)) {
+		rc = PTR_ERR(chip);
+		goto out;
+	}
 
 	dev_set_drvdata(&chip->dev, priv);
 	chip->acpi_dev_handle = device->handle;
 	chip->flags = TPM_CHIP_FLAG_TPM2;
 
-	return tpm_chip_register(chip);
+	rc = tpm_chip_register(chip);
+
+out:
+	acpi_put_table((struct acpi_table_header *)buf);
+	return rc;
 }
 
 static int crb_acpi_remove(struct acpi_device *device)

Signature · 1 line

1.7.12.4

In check_acpi_tpm2(), we get the TPM2 table just to make sure the table is there, not used after the init, so the acpi_put_table() should be added to release the ACPI memory.

Fixes 4cb586a188d4 ("tpm_tis: Consolidate the platform and acpi probe flow")

Cc [email protected]

Signed-off-by Hanjun Guo <[email protected]>

---
 drivers/char/tpm/tpm_tis.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

drivers/char/tpm/tpm_tis.c +5 -4

index bcff642..ed5dabd 100644
@@ -125,6 +125,7 @@ static int check_acpi_tpm2(struct device *dev)
 	const struct acpi_device_id *aid = acpi_match_device(tpm_acpi_tbl, dev);
 	struct acpi_table_tpm2 *tbl;
 	acpi_status st;
+	int ret = 0;
 
 	if (!aid || aid->driver_data != DEVICE_IS_TPM2)
 		return 0;

@@ -132,8 +133,7 @@ static int check_acpi_tpm2(struct device *dev)
 	/* If the ACPI TPM2 signature is matched then a global ACPI_SIG_TPM2
 	 * table is mandatory
 	 */
-	st =
-	    acpi_get_table(ACPI_SIG_TPM2, 1, (struct acpi_table_header **)&tbl);
+	st = acpi_get_table(ACPI_SIG_TPM2, 1, (struct acpi_table_header **)&tbl);
 	if (ACPI_FAILURE(st) || tbl->header.length < sizeof(*tbl)) {
 		dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
 		return -EINVAL;

@@ -141,9 +141,10 @@ static int check_acpi_tpm2(struct device *dev)
 
 	/* The tpm2_crb driver handles this device */
 	if (tbl->start_method != ACPI_TPM2_MEMORY_MAPPED)
-		return -ENODEV;
+		ret = -ENODEV;
 
-	return 0;
+	acpi_put_table((struct acpi_table_header *)tbl);
+	return ret;
 }
 #else
 static int check_acpi_tpm2(struct device *dev)

Signature · 1 line

1.7.12.4