Skip to contentSkip to conversation

ip_gre: do not report erspan version on GRE interface

PATCH Applied Hangbin Liu 3 participants 3 messages Dec 3, 2022 – Dec 6, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ip_gre: do not report erspan version on GRE interface

Although the type I ERSPAN is based on the barebones IP + GRE encapsulation and no extra ERSPAN header. Report erspan version on GRE interface looks unreasonable. Fix this by separating the erspan and gre fill info.

IPv6 GRE does not have this info as IPv6 only supports erspan version 1 and 2.

Fixes f989d546a2d5 ("erspan: Add type I version 0 support.")

---
v2: fix o_flags not passed to gre fill info, reported by kernel test robot

---
 net/ipv4/ip_gre.c | 48 ++++++++++++++++++++++++++++-------------------
 1 file changed, 29 insertions(+), 19 deletions(-)
net/ipv4/ip_gre.c +29 -19
index f866d6282b2b..cae9f1a4e059 100644
@@ -1492,24 +1492,6 @@ static int ipgre_fill_info(struct sk_buff *skb, const struct net_device *dev)
 	struct ip_tunnel_parm *p = &t->parms;
 	__be16 o_flags = p->o_flags;
 
-	if (t->erspan_ver <= 2) {
-		if (t->erspan_ver != 0 && !t->collect_md)
-			o_flags |= TUNNEL_KEY;
-
-		if (nla_put_u8(skb, IFLA_GRE_ERSPAN_VER, t->erspan_ver))
-			goto nla_put_failure;
-
-		if (t->erspan_ver == 1) {
-			if (nla_put_u32(skb, IFLA_GRE_ERSPAN_INDEX, t->index))
-				goto nla_put_failure;
-		} else if (t->erspan_ver == 2) {
-			if (nla_put_u8(skb, IFLA_GRE_ERSPAN_DIR, t->dir))
-				goto nla_put_failure;
-			if (nla_put_u16(skb, IFLA_GRE_ERSPAN_HWID, t->hwid))
-				goto nla_put_failure;
-		}
-	}
-
 	if (nla_put_u32(skb, IFLA_GRE_LINK, p->link) ||
 	    nla_put_be16(skb, IFLA_GRE_IFLAGS,
 			 gre_tnl_flags_to_gre_flags(p->i_flags)) ||
@@ -1550,6 +1532,34 @@ static int ipgre_fill_info(struct sk_buff *skb, const struct net_device *dev)
 	return -EMSGSIZE;
 }
 
+static int erspan_fill_info(struct sk_buff *skb, const struct net_device *dev)
+{
+	struct ip_tunnel *t = netdev_priv(dev);
+
+	if (t->erspan_ver <= 2) {
+		if (t->erspan_ver != 0 && !t->collect_md)
+			t->parms.o_flags |= TUNNEL_KEY;
+
+		if (nla_put_u8(skb, IFLA_GRE_ERSPAN_VER, t->erspan_ver))
+			goto nla_put_failure;
+
+		if (t->erspan_ver == 1) {
+			if (nla_put_u32(skb, IFLA_GRE_ERSPAN_INDEX, t->index))
+				goto nla_put_failure;
+		} else if (t->erspan_ver == 2) {
+			if (nla_put_u8(skb, IFLA_GRE_ERSPAN_DIR, t->dir))
+				goto nla_put_failure;
+			if (nla_put_u16(skb, IFLA_GRE_ERSPAN_HWID, t->hwid))
+				goto nla_put_failure;
+		}
+	}
+
+	return ipgre_fill_info(skb, dev);
+
+nla_put_failure:
+	return -EMSGSIZE;
+}
+
 static void erspan_setup(struct net_device *dev)
 {
 	struct ip_tunnel *t = netdev_priv(dev);
@@ -1628,7 +1638,7 @@ static struct rtnl_link_ops erspan_link_ops __read_mostly = {
 	.changelink	= erspan_changelink,
 	.dellink	= ip_tunnel_dellink,
 	.get_size	= ipgre_get_size,
-	.fill_info	= ipgre_fill_info,
+	.fill_info	= erspan_fill_info,
 	.get_link_net	= ip_tunnel_get_link_net,
 };
 
Signature · 1 line
2.38.1
Acked-by on v2 1/1
#1 lore raw
Quoted 5 lines · Hangbin Liu

Although the type I ERSPAN is based on the barebones IP + GRE encapsulation and no extra ERSPAN header. Report erspan version on GRE interface looks unreasonable. Fix this by separating the erspan and gre fill info.

Thanks, it's true that current code when using GRE, we will report ERSPAN type, which is not necessary.

Quoted 3 lines

IPv6 GRE does not have this info as IPv6 only supports erspan version 1 and 2.

I checked the ipv6 GRE, and it doesn't report because we're checking in ip6gre_fill_info

        if (p->erspan_ver == 1 || p->erspan_ver == 2) {

So it's indeed ok for IPv6 GRE.

Quoted 4 lines
Fixes f989d546a2d5 ("erspan: Add type I version 0 support.")
#2 lore raw
In reply to Hangbin Liu
This patch was applied to netdev/net.git (master) by Paolo Abeni <[email protected]>:

Hello:

This patch was applied to netdev/net.git (master)
by Paolo Abeni <[email protected]>:

Quoted 9 lines · On Sat, 3 Dec 2022 11:28:58 +0800 you wrote:

Although the type I ERSPAN is based on the barebones IP + GRE encapsulation and no extra ERSPAN header. Report erspan version on GRE interface looks unreasonable. Fix this by separating the erspan and gre fill info.

IPv6 GRE does not have this info as IPv6 only supports erspan version 1 and 2.

[...]

Here is the summary with links:
- [PATCHv2,net] ip_gre: do not report erspan version on GRE interface

    https://git.kernel.org/netdev/net/c/ee496694b9ee

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html