hciconfig problems
Hello,
I'm using Redhat with kernel 2.4.20-18.9. I use an Acer USB Bluetooth Dongle (ID 0b7a:07d0). I habe installed the latest bluez-libs followed by bluez-utils with no problem.
In my /etc/modules.conf i added:
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias bt-proto-5 cmtp
alias tty-ldisc-15 hci_uart
After a restart of my linux i load the hci_usb:
Quoted 1 line
modprobe
hci_usb
Start of the Host Controller:
Quoted 1 line
hcid
hciconfig returns:
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RUNNING
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
lsmod returns:
Module Size Used by Tainted: PFhci_usb 9752 1
bluez 40260 9 [hci_usb]
...
..
.
When i try to start hci0, then hciconfig hangsup or i get an "Speicherzugriffsfehler" (segmentation fault):
Quoted 1 line
hciconfig hci0 up
In the Processlist i see:
4221 pts/1 D 0:00 hciconfig hci0 up
And hciconfig still returns:
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RUNNING
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
can some one help me with this problem. I'm really desperate.
Thanx.
Marius
______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Mariusz,
Quoted 32 lines
I'm using Redhat with kernel 2.4.20-18.9. I use an Acer USB Bluetooth Dongle (ID 0b7a:07d0). I habe installed the latest bluez-libs followed by bluez-utils with no problem.
In my
/etc/modules.confi added:
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias bt-proto-5 cmtp
alias tty-ldisc-15hci_uartAfter a restart of my linux i load the
hci_usb:Quoted 1 line
modprobe
hci_usbStart of the Host Controller:
Quoted 1 line
hcid
hciconfig returns:
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RUNNING
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0lsmod returns:
Module Size Used by Tainted: PFhci_usb9752 1
bluez 40260 9 [hci_usb]
...
..
.
Quoted 2 lines
When i try to start hci0, then hciconfig hangsup or i get an "Speicherzugriffsfehler" (segmentation fault):
Quoted 1 line
hciconfig hci0 up
is this a AMD64 system running a 64-bit operating system? If yes, then you should update your kernel and the library/utilities to the latest version.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users