Skip to contentSkip to conversation

asus Motherboard's usb failing with 2.6.8

DISCUSSION John covici 1 participant 2 messages Sep 11, 2004 – Sep 12, 2004 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

I have an Asus Motherboard and I cannot get usb2.0 to work properly. I get the following messages:
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: BIOS handoff failed (104, 1010001) ehci_hcd 0000:00:10.4: can't reset
ehci_hcd 0000:00:10.4: init 0000:00:10.4 fail, -95
ehci_hcd: probe of 0000:00:10.4 failed with error -95

The relevant lspci listings are:
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at fbc00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

Any assistance would be appreciated.

Signature · 2 lines
         John Covici
         [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Well, getting the BIOS now in beta has helped a lot -- I still get the failure, however before the failure it seems to load the module and initialize the mass storage driver for at least 4 ports -- so they may still need to fix something or maybe the 6.9 will fix it.

Thanks much.

on Saturday 09/11/2004 Will Beers([email protected]) wrote

Quoted 47 lines

Update to the latest BIOS, and it's fixed. The code was also modified to not fail in this instance in 2.6.9-rc1.

Will Beers

Quoted 41 lines · John covici

I have an Asus Motherboard and I cannot get usb2.0 to work properly. I get the following messages:
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: BIOS handoff failed (104, 1010001) ehci_hcd 0000:00:10.4: can't reset
ehci_hcd 0000:00:10.4: init 0000:00:10.4 fail, -95
ehci_hcd: probe of 0000:00:10.4 failed with error -95

The relevant lspci listings are:
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2

0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at fbc00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

Any assistance would be appreciated.

Signature · 2 lines
         John Covici
         [email protected]