spi: dt-bindings: Convert Synquacer SPI to DT schema
Subsystems (3)
Rob Herring
maintainerPATCH 1/1 spi: dt-bindings: Convert Synquacer SPI to DT schema
Convert the Socionext Synquacer SPI binding to DT format.
--- .../bindings/spi/socionext,synquacer-spi.yaml | 73 +++++++++++++++++++ .../devicetree/bindings/spi/spi-synquacer.txt | 27 ------- MAINTAINERS | 2 +- 3 files changed, 74 insertions(+), 28 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-synquacer.txt
Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml new file +73 -0
@@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/socionext,synquacer-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext SynQuacer HS-SPI Controller + +maintainers: + - Masahisa Kojima <[email protected]> + - Jassi Brar <[email protected]> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: socionext,synquacer-spi + + reg: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: core clock + - description: rate clock + + clock-names: + minItems: 1 + items: + - const: iHCLK + - const: iPCLK + + interrupts: + items: + - description: Receive Interrupt + - description: Transmit Interrupt + - description: Fault Interrupt + + socionext,use-rtm: + type: boolean + description: Enable using "retimed clock" for RX + + socionext,set-aces: + type: boolean + description: Enable same active clock edges field to be set + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@ff110000 { + compatible = "socionext,synquacer-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_hsspi>; + clock-names = "iHCLK"; + socionext,use-rtm; + socionext,set-aces; + }; +...
Documentation/devicetree/bindings/spi/spi-synquacer.txt deleted +0 -27
@@ -1,27 +0,0 @@ -* Socionext Synquacer HS-SPI bindings - -Required Properties: -- compatible: should be "socionext,synquacer-spi" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts. -- clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK) -- clock-names: Shall be "iHCLK" and "iPCLK" respectively - -Optional Properties: -- socionext,use-rtm: boolean, if required to use "retimed clock" for RX -- socionext,set-aces: boolean, if same active clock edges field to be set. - -Example: - - spi0: spi@ff110000 { - compatible = "socionext,synquacer-spi"; - reg = <0xff110000 0x1000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_hsspi>; - clock-names = "iHCLK"; - socionext,use-rtm; - socionext,set-aces; - };
MAINTAINERS +1 -1
@@ -19037,7 +19037,7 @@ M: Masahisa Kojima <[email protected]> M: Jassi Brar <[email protected]> L: [email protected] S: Maintained -F: Documentation/devicetree/bindings/spi/spi-synquacer.txt +F: Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml F: drivers/spi/spi-synquacer.c SOCIONEXT SYNQUACER I2C DRIVER
Signature · 1 line
2.35.1
Mark Brown
maintainerQuoted 3 lines · Rob Herring
Convert the Socionext Synquacer SPI binding to DT format.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: dt-bindings: Convert Synquacer SPI to DT schema
commit: 3cf241c3d56ff19f5192cb42a025bc6582b6e8fa
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark