FAILED: patch "[PATCH] phy: qcom-qmp-combo: fix out-of-bounds clock access" failed to apply to 5.15-stable tree

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

Possible dependencies:

d8a5b59c5fc7 ("phy: qcom-qmp-combo: fix out-of-bounds clock access") 712e5dffe911 ("phy: qcom-qmp-combo: Parameterize swing and pre_emphasis tables") 85936d4f3815 ("phy: qcom-qmp: add regulator_set_load to dp phy") 033f3a16fb92 ("phy: qcom-qmp-combo: change symbol prefix to qcom_qmp_phy_combo") ee7ffc92a950 ("phy: qcom-qmp-combo: drop all non-combo compatibles support") 94a407cc17a4 ("phy: qcom-qmp: create copies of QMP PHY driver")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From d8a5b59c5fc75c99ba17e3eb1a8f580d8d172b28 Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Mon, 14 Nov 2022 09:13:41 +0100
Subject: [PATCH] phy: qcom-qmp-combo: fix out-of-bounds clock access

The SM8250 only uses three clocks but the DP configuration erroneously described four clocks.

In case the DP part of the PHY is initialised before the USB part, this would lead to uninitialised memory beyond the bulk-clocks array to be treated as a clock pointer as the clocks are requested based on the USB configuration.

index 5e11b6a1d189..bb38b18258ca 100644
@@ -1270,8 +1270,8 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
 	.swing_hbr3_hbr2	= &qmp_dp_v3_voltage_swing_hbr3_hbr2,
 	.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
 
-	.clk_list		= qmp_v4_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
+	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,