FAILED: patch "[PATCH] ravb: Fix "failed to switch device to config mode" message" failed to apply to 4.9-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
Possible dependencies:
c72a7e42592b ("ravb: Fix "failed to switch device to config mode" message during unbind")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From c72a7e42592b2e18d862cf120876070947000d7a Mon Sep 17 00:00:00 2001
From: Biju Das <[email protected]>
Date: Wed, 14 Dec 2022 10:51:18 +0000
Subject: [PATCH] ravb: Fix "failed to switch device to config mode" message
during unbind
This patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch device to config mode" during unbind.
We are doing register access after pm_runtime_put_sync().
We usually do cleanup in reverse order of init. Currently in remove(), the "pm_runtime_put_sync" is not in reverse order.
Probe
reset_control_deassert(rstc); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev);
remove
pm_runtime_put_sync(&pdev->dev); unregister_netdev(ndev); .. ravb_mdio_release(priv); pm_runtime_disable(&pdev->dev);
Consider the call to unregister_netdev() unregister_netdev->unregister_netdevice_queue->rollback_registered_many that calls the below functions which access the registers after pm_runtime_put_sync()
1) ravb_get_stats
2) ravb_close
drivers/net/ethernet/renesas/ravb_main.c +1 -1
@@ -2903,12 +2903,12 @@ static int ravb_remove(struct platform_device *pdev) priv->desc_bat_dma);/* Set reset mode */ ravb_write (ndev,CCC_OPC_RESET ,CCC ); -pm_runtime_put_sync (&pdev->dev);unregister_netdev (ndev);if (info->nc_queues)netif_napi_del (&priv->napi[RAVB_NC ]);netif_napi_del (&priv->napi[RAVB_BE ]);ravb_mdio_release (priv); +pm_runtime_put_sync (&pdev->dev);pm_runtime_disable (&pdev->dev);reset_control_assert (priv->rstc);free_netdev (ndev);
Hi All,
I will fix the failed patches and send to 4.9, 4.14, 4.19, 5.4 , 5.10 and 5.15 stable trees.
Cheers,
Biju
Quoted 85 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 04 January 2023 14:17
To: Biju Das <[email protected]>; [email protected]; [email protected]
Cc: [email protected]
Subject: FAILED: patch "[PATCH] ravb: Fix "failed to switch device to config mode" message" failed to apply to 4.9-stable treeThe patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.Possible dependencies:
c72a7e42592b("ravb: Fix "failed to switch device to config mode" message during unbind")thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From
c72a7e42592b2e18d862cf120876070947000d7aMon Sep 17 00:00:00 2001
From: Biju Das <[email protected]>
Date: Wed, 14 Dec 2022 10:51:18 +0000
Subject: [PATCH] ravb: Fix "failed to switch device to config mode" message during unbindThis patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch device to config mode" during unbind.
We are doing register access after
pm_runtime_put_sync().We usually do cleanup in reverse order of init. Currently in
remove(), the "pm_runtime_put_sync" is not in reverse order.Probe
reset_control_deassert(rstc); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev);remove
pm_runtime_put_sync(&pdev->dev); unregister_netdev(ndev); .. ravb_mdio_release(priv); pm_runtime_disable(&pdev->dev);Consider the call to
unregister_netdev()unregister_netdev-Quoted 1 line
unregister_netdevice_queue->rollback_registered_manythat calls the below functions which access the registers after
pm_runtime_put_sync()
1)ravb_get_stats
2)ravb_closeFixes c156633f1353 ("Renesas Ethernet AVB driver proper")Signed-off-by Biju Das <[email protected]>Reviewed-by Leon Romanovsky <[email protected]>Link:
Signed-off-by Paolo Abeni <[email protected]>drivers/net/ethernet/renesas/ravb_main.c +1
-1@@ -2903,12 +2903,12 @@ static int ravb_remove(struct platform_device *pdev) priv->desc_bat_dma);/* Set reset mode */ ravb_write (ndev,CCC_OPC_RESET ,CCC ); -pm_runtime_put_sync (&pdev->dev);unregister_netdev (ndev);if (info->nc_queues)netif_napi_del (&priv->napi[RAVB_NC ]);netif_napi_del (&priv->napi[RAVB_BE ]);ravb_mdio_release (priv); +pm_runtime_put_sync (&pdev->dev);pm_runtime_disable (&pdev->dev);reset_control_assert (priv->rstc);free_netdev (ndev);