Skip to contentSkip to conversation

PPC64: Add pcibios_remove_root_bus

PATCH Applied Paul Mackerras 2 participants 2 messages Sep 29, 2004

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 PPC64: Add pcibios_remove_root_bus

From: John Rose <[email protected]>

The following patch creates pcibios_remove_root_bus(), which performs the ppc64-specific actions for removal of PCI Host Bridges. This call is invoked by the RPA DLPAR driver upon PHB removal.

arch/ppc64/kernel/pSeries_pci.c +48 -0
diff -Nru a/arch/ppc64/kernel/pSeries_pci.c b/arch/ppc64/kernel/pSeries_pci.c
@@ -472,6 +472,54 @@
 		remap_bus_range(hose->bus);
 }
 
+
+/* RPA-specific bits for removing PHBs */
+int pcibios_remove_root_bus(struct pci_controller *phb)
+{
+	struct pci_bus *b = phb->bus;
+	struct resource *res;
+	int rc, i;
+
+	res = b->resource[0];
+	if (!res->flags) {
+		printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__,
+				b->name);
+		return 1;
+	}
+
+	rc = unmap_bus_range(b);
+	if (rc) {
+		printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
+			__FUNCTION__, b->name);
+		return 1;
+	}
+
+	if (release_resource(res)) {
+		printk(KERN_ERR "%s: failed to release IO on bus %s\n",
+				__FUNCTION__, b->name);
+		return 1;
+	}
+
+	for (i = 1; i < 3; ++i) {
+		res = b->resource[i];
+		if (!res->flags && i == 0) {
+			printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
+				__FUNCTION__, b->name);
+			return 1;
+		}
+		if (res->flags && release_resource(res)) {
+			printk(KERN_ERR
+			       "%s: failed to release IO %d on bus %s\n",
+				__FUNCTION__, i, b->name);
+			return 1;
+		}
+	}
+
+	list_del(&phb->list_node);
+	return 0;
+}
+EXPORT_SYMBOL(pcibios_remove_root_bus);
+
 static void __init pSeries_request_regions(void)
 {
 	struct device_node *i8042;
include/asm-ppc64/pci-bridge.h +2 -0
diff -Nru a/include/asm-ppc64/pci-bridge.h b/include/asm-ppc64/pci-bridge.h
@@ -90,6 +90,8 @@
 extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 					 struct device_node *dev, int primary);
 
+extern int pcibios_remove_root_bus(struct pci_controller *phb);
+
 /* Use this macro after the PCI bus walk for max performance when it
  * is known that sysdata is correct.
  */
Applied
#1 lore raw
Quoted 5 lines · Paul Mackerras

From: John Rose <[email protected]>

The following patch creates pcibios_remove_root_bus(), which performs the ppc64-specific actions for removal of PCI Host Bridges. This call is invoked by the RPA DLPAR driver upon PHB removal.

Applied, thanks.

greg k-h