ARM: dts: imx8mm-evk: Fix wrong PMIC device for new EVK board
Subsystems (2)
PATCH 1/1 ARM: dts: imx8mm-evk: Fix wrong PMIC device for new EVK board
In commit 48ddafd (imx8mm_evk: Switch to new imx8mm evk board), the iMX8MM EVK support was updated to new EVK board which is using PCA9450A PMIC.
But the commit 24a7a3c (imx8mm: synchronise device tree with linux) changed DTS node back to legacy PMIC which is not aligned with SPL codes and defconfig, then cause SPL boot failure.
--- arch/arm/dts/imx8mm-evk-u-boot.dtsi | 4 +- arch/arm/dts/imx8mm-evk.dtsi | 127 +++++++++++++++++++----------------- 2 files changed, 68 insertions(+), 63 deletions(-)
arch/arm/dts/imx8mm-evk-u-boot.dtsi +2 -2
@@ -121,11 +121,11 @@ u-boot,dm-spl; }; -&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} { +&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25} { u-boot,dm-spl; }; -&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} { +&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25/regulators} { u-boot,dm-spl; };
arch/arm/dts/imx8mm-evk.dtsi +66 -61
181 lines not on this page · raw message
Signature · 1 line
2.7.4
Hi Ye Li
Quoted 6 lines · Ye Li
In commit 48ddafd (
imx8mm_evk: Switch to new imx8mm evk board), the iMX8MM EVK support was updated to new EVK board which is using PCA9450A PMIC.
But the commit 24a7a3c (imx8mm: synchronise device tree with linux) changed DTS node back to legacy PMIC which is not aligned with SPL codes and defconfig, then cause SPL boot failure.
Please note that I even mentioned this back in the day [1], however, neither NXP nor anybody else reacted in any way.
The correct way would be, of course, to update this in Linux and subsequently re-syncing with U-Boot. Do you at least plan to properly update this on the Linux side as well?
Thanks!
[1] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
[snip]
Cheers
Marcel
Hi Marcel,
Quoted 12 lines · Marcel Ziswiler
Caution: EXT Email
Hi Ye Li
Quoted 7 lines · Ye Li
In commit 48ddafd (
imx8mm_evk: Switch to new imx8mm evk board), the iMX8MM EVK support was updated to new EVK board which is using PCA9450A PMIC.
But the commit 24a7a3c (imx8mm: synchronise device tree with linux) changed DTS node back to legacy PMIC which is not aligned with SPL codes and defconfig, then cause SPL boot failure.
Quoted 8 lines
Please note that I even mentioned this back in the day [1], however, neither NXP nor anybody else reacted in
any way.The correct way would be, of course, to update this in Linux and subsequently re-syncing with U-Boot. Do you at
least plan to properly update this on the Linux side as well?
Yes, we will upstream this to kernel. I also notice another break on 8ULP EVK which causes no any log. Fix has sent out.
Best regards,
Ye Li
Quoted 16 lines
Thanks!
[1] https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2
Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Fcover%2F20220721132748.1052 244-1- marcel%40ziswiler.com%2F&data=05%7C01%7Cye.li%40nxp.com%7Cd979241c65a d4161f80a08daf86b833f%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63 8095437885252506%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoi V2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=y1w4PE3% 2BKoJ%2Beskp%2Bjx54BYq5bLI6SjlUPwTXWUnEB4%3D&reserved=0[snip]
Cheers
Marcel