net: ftmac100: handle netdev flags IFF_PROMISC and IFF_ALLMULTI
Subsystems (2)
PATCH 1/1 net: ftmac100: handle netdev flags IFF_PROMISC and IFF_ALLMULTI
When netdev->flags has IFF_PROMISC or IFF_ALLMULTI, set the corresponding bits in the MAC Control Register (MACCR).
This change is based on code from the ftgmac100 driver, see ftgmac100_start_hw() in ftgmac100.c
Signed-off-by Sergei Antonov <[email protected]>
--- drivers/net/ethernet/faraday/ftmac100.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/net/ethernet/faraday/ftmac100.c +6 -0
@@ -182,6 +182,12 @@ static int ftmac100_start_hw(struct ftmac100 *priv)if (netdev->mtu >ETH_DATA_LEN ) maccr |=FTMAC100_MACCR_RX_FTL ; +/* Add other bits as needed */ +if (netdev->flags &IFF_PROMISC ) + maccr |=FTMAC100_MACCR_RCV_ALL ; +if (netdev->flags &IFF_ALLMULTI ) + maccr |=FTMAC100_MACCR_RX_MULTIPKT ; +iowrite32 (maccr, priv->base +FTMAC100_OFFSET_MACCR );return 0 ; }
Signature · 1 line
2.34.1
This patch was applied to netdev/net-next.git (master) by David S. Miller <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (master) by David S. Miller <[email protected]>:
Quoted 9 lines · On Mon, 16 Jan 2023 21:27:16 +0300 you wrote:
When
netdev->flagshasIFF_PROMISCorIFF_ALLMULTI, set the corresponding bits in the MAC Control Register (MACCR).This change is based on code from the ftgmac100 driver, see
ftgmac100_start_hw()inftgmac100.cSigned-off-by Sergei Antonov <[email protected]>[...]
Here is the summary with links:
- [net-next] net: ftmac100: handle netdev flags IFF_PROMISC and IFF_ALLMULTI
https://git.kernel.org/netdev/net-next/c/75943bc9701b
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html