Skip to contentSkip to conversation

net: dsa: microchip: add support for credit based shaper

PATCH Applied Arun Ramadoss 2 participants 4 messages Jan 20, 2023 – Jan 24, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v2 cover net: dsa: microchip: add support for credit based shaper

LAN937x switch family, KSZ9477, KSZ9567, KSZ9563 and KSZ8563 supports the credit based shaper. But there were few difference between LAN937x and KSZ switch like
- number of queues for LAN937x is 8 and for others it is 4.
- size of credit increment register for LAN937x is 24 and for other is 16-bit. This patch series add the credit based shaper with common implementation for LAN937x and KSZ swithes.

v1 -> v2
- Added the check for divide by zero in cinc_cal()
- Port queue is splitted based on dev->info->tc_num_queues

RFC -> Patch v1
- Rebased to latest net-next

Arun Ramadoss (2):
net: dsa: microchip: enable port queues for tc mqprio
net: dsa: microchip: add support for credit based shaper

 drivers/net/dsa/microchip/ksz9477.c      |  25 +++++
 drivers/net/dsa/microchip/ksz9477.h      |   2 +
 drivers/net/dsa/microchip/ksz9477_reg.h  |  33 ++----
 drivers/net/dsa/microchip/ksz_common.c   | 130 +++++++++++++++++++++++
 drivers/net/dsa/microchip/ksz_common.h   |  21 ++++
 drivers/net/dsa/microchip/lan937x.h      |   1 +
 drivers/net/dsa/microchip/lan937x_main.c |   9 ++
 drivers/net/dsa/microchip/lan937x_reg.h  |   3 +
 net/dsa/tag_ksz.c                        |  15 +++
 9 files changed, 213 insertions(+), 26 deletions(-)

base-commit: 1038bfb23649faf47fc0714dea42f472cdcf1784

Signature · 1 line
2.36.1
#1 lore raw

PATCH v2 1/2 net: dsa: microchip: enable port queues for tc mqprio

LAN937x family of switches has 8 queues per port where the KSZ switches has 4 queues per port. By default, only one queue per port is enabled. The queues are configurable in 2, 4 or 8. This patch add 8 number of queues for LAN937x and 4 for other switches.
In the tag_ksz.c file, prioirty of the packet is queried using the skb buffer and the corresponding value is updated in the tag.

---
v1 -> v2
- enable port queue split based on dev->info->num_tx_queues

---
 drivers/net/dsa/microchip/ksz9477.c      | 18 ++++++++++++++++++
 drivers/net/dsa/microchip/ksz9477.h      |  1 +
 drivers/net/dsa/microchip/ksz9477_reg.h  |  6 +++++-
 drivers/net/dsa/microchip/ksz_common.c   | 18 ++++++++++++++++++
 drivers/net/dsa/microchip/ksz_common.h   |  1 +
 drivers/net/dsa/microchip/lan937x_main.c |  4 ++++
 net/dsa/tag_ksz.c                        | 15 +++++++++++++++
 7 files changed, 62 insertions(+), 1 deletion(-)
drivers/net/dsa/microchip/ksz9477.c +18 -0
index 47b54ecf2c6f..6526c3c204bb 100644
@@ -980,6 +980,22 @@ int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
 	return ksz_write8(dev, REG_SW_LUE_CTRL_0, value);
 }
 
+void ksz9477_port_queue_split(struct ksz_device *dev, int port)
+{
+	u8 data;
+
+	if (dev->info->num_tx_queues == 8)
+		data = PORT_EIGHT_QUEUE;
+	else if (dev->info->num_tx_queues == 4)
+		data = PORT_FOUR_QUEUE;
+	else if (dev->info->num_tx_queues == 2)
+		data = PORT_TWO_QUEUE;
+	else
+		data = PORT_SINGLE_QUEUE;
+
+	ksz_prmw8(dev, port, REG_PORT_CTRL_0, PORT_QUEUE_SPLIT_MASK, data);
+}
+
 void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	struct dsa_switch *ds = dev->ds;
@@ -991,6 +1007,8 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 		ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
 			     true);
 
+	ksz9477_port_queue_split(dev, port);
+
 	ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
 
 	/* set back pressure */
drivers/net/dsa/microchip/ksz9477.h +1 -0
index 7c5bb3032772..2554cb63d326 100644
@@ -56,5 +56,6 @@ int ksz9477_reset_switch(struct ksz_device *dev);
 int ksz9477_dsa_init(struct ksz_device *dev);
 int ksz9477_switch_init(struct ksz_device *dev);
 void ksz9477_switch_exit(struct ksz_device *dev);
+void ksz9477_port_queue_split(struct ksz_device *dev, int port);
 
 #endif
drivers/net/dsa/microchip/ksz9477_reg.h +5 -1
index cc457fa64939..b433a529cfec 100644
@@ -850,7 +850,11 @@
 #define PORT_FORCE_TX_FLOW_CTRL		BIT(4)
 #define PORT_FORCE_RX_FLOW_CTRL		BIT(3)
 #define PORT_TAIL_TAG_ENABLE		BIT(2)
-#define PORT_QUEUE_SPLIT_ENABLE		0x3
+#define PORT_QUEUE_SPLIT_MASK		GENMASK(1, 0)
+#define PORT_EIGHT_QUEUE		0x3
+#define PORT_FOUR_QUEUE			0x2
+#define PORT_TWO_QUEUE			0x1
+#define PORT_SINGLE_QUEUE		0x0
 
 #define REG_PORT_CTRL_1			0x0021
 
drivers/net/dsa/microchip/ksz_common.c +18 -0
index 5e1e5bd555d2..fbb107754057 100644
@@ -1080,6 +1080,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x07,	/* can be configured as cpu port */
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 3,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1106,6 +1107,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.num_statics = 8,
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
+		.num_tx_queues = 4,
 		.ops = &ksz8_dev_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
@@ -1144,6 +1146,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.num_statics = 8,
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
+		.num_tx_queues = 4,
 		.ops = &ksz8_dev_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
@@ -1168,6 +1171,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.num_statics = 8,
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
+		.num_tx_queues = 4,
 		.ops = &ksz8_dev_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
@@ -1192,6 +1196,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.num_statics = 8,
 		.cpu_ports = 0x4,	/* can be configured as cpu port */
 		.port_cnt = 3,
+		.num_tx_queues = 4,
 		.ops = &ksz8_dev_ops,
 		.mib_names = ksz88xx_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
@@ -1213,6 +1218,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x7F,	/* can be configured as cpu port */
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 4,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
@@ -1245,6 +1251,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x3F,	/* can be configured as cpu port */
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 2,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
@@ -1277,6 +1284,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x7F,	/* can be configured as cpu port */
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 2,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
@@ -1307,6 +1315,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x07,	/* can be configured as cpu port */
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 2,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1332,6 +1341,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x07,	/* can be configured as cpu port */
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 3,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1357,6 +1367,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x7F,	/* can be configured as cpu port */
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 3,
+		.num_tx_queues = 4,
 		.ops = &ksz9477_dev_ops,
 		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
@@ -1387,6 +1398,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1411,6 +1423,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x30,	/* can be configured as cpu port */
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1435,6 +1448,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x30,	/* can be configured as cpu port */
 		.port_cnt = 8,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1463,6 +1477,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x38,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1491,6 +1506,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x30,	/* can be configured as cpu port */
 		.port_cnt = 8,		/* total physical port count */
 		.port_nirqs = 6,
+		.num_tx_queues = 8,
 		.ops = &lan937x_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -2071,6 +2087,8 @@ static int ksz_setup(struct dsa_switch *ds)
 
 	dev->dev_ops->enable_stp_addr(dev);
 
+	ds->num_tx_queues = dev->info->num_tx_queues;
+
 	regmap_update_bits(dev->regmap[0], regs[S_MULTICAST_CTRL],
 			   MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
 
drivers/net/dsa/microchip/ksz_common.h +1 -0
index 7260528e5c57..1a00143b0345 100644
@@ -49,6 +49,7 @@ struct ksz_chip_data {
 	int cpu_ports;
 	int port_cnt;
 	u8 port_nirqs;
+	u8 num_tx_queues;
 	const struct ksz_dev_ops *ops;
 	bool phy_errata_9477;
 	bool ksz87xx_eee_link_erratum;
drivers/net/dsa/microchip/lan937x_main.c +4 -0
index 06d3d0308cba..923388f87996 100644
@@ -15,6 +15,7 @@
 
 #include "lan937x_reg.h"
 #include "ksz_common.h"
+#include "ksz9477.h"
 #include "lan937x.h"
 
 static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
@@ -180,6 +181,9 @@ void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 		lan937x_port_cfg(dev, port, REG_PORT_CTRL_0,
 				 PORT_TAIL_TAG_ENABLE, true);
 
+	/* Enable the Port Queue split */
+	ksz9477_port_queue_split(dev, port);
+
 	/* set back pressure for half duplex */
 	lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE,
 			 true);
net/dsa/tag_ksz.c +15 -0
index 694478fe07d6..0eb1c7784c3d 100644
@@ -178,6 +178,7 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ8795, KSZ8795_NAME);
 #define KSZ9477_PTP_TAG_LEN		4
 #define KSZ9477_PTP_TAG_INDICATION	0x80
 
+#define KSZ9477_TAIL_TAG_PRIO		GENMASK(8, 7)
 #define KSZ9477_TAIL_TAG_OVERRIDE	BIT(9)
 #define KSZ9477_TAIL_TAG_LOOKUP		BIT(10)
 
@@ -269,6 +270,8 @@ static struct sk_buff *ksz_defer_xmit(struct dsa_port *dp, struct sk_buff *skb)
 static struct sk_buff *ksz9477_xmit(struct sk_buff *skb,
 				    struct net_device *dev)
 {
+	u16 queue_mapping = skb_get_queue_mapping(skb);
+	u8 prio = netdev_txq_to_tc(dev, queue_mapping);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	__be16 *tag;
 	u8 *addr;
@@ -285,6 +288,8 @@ static struct sk_buff *ksz9477_xmit(struct sk_buff *skb,
 
 	val = BIT(dp->index);
 
+	val |= FIELD_PREP(KSZ9477_TAIL_TAG_PRIO, prio);
+
 	if (is_link_local_ether_addr(addr))
 		val |= KSZ9477_TAIL_TAG_OVERRIDE;
 
@@ -322,12 +327,15 @@ static const struct dsa_device_ops ksz9477_netdev_ops = {
 DSA_TAG_DRIVER(ksz9477_netdev_ops);
 MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9477, KSZ9477_NAME);
 
+#define KSZ9893_TAIL_TAG_PRIO		GENMASK(4, 3)
 #define KSZ9893_TAIL_TAG_OVERRIDE	BIT(5)
 #define KSZ9893_TAIL_TAG_LOOKUP		BIT(6)
 
 static struct sk_buff *ksz9893_xmit(struct sk_buff *skb,
 				    struct net_device *dev)
 {
+	u16 queue_mapping = skb_get_queue_mapping(skb);
+	u8 prio = netdev_txq_to_tc(dev, queue_mapping);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	u8 *addr;
 	u8 *tag;
@@ -343,6 +351,8 @@ static struct sk_buff *ksz9893_xmit(struct sk_buff *skb,
 
 	*tag = BIT(dp->index);
 
+	*tag |= FIELD_PREP(KSZ9893_TAIL_TAG_PRIO, prio);
+
 	if (is_link_local_ether_addr(addr))
 		*tag |= KSZ9893_TAIL_TAG_OVERRIDE;
 
@@ -384,11 +394,14 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9893, KSZ9893_NAME);
 #define LAN937X_TAIL_TAG_BLOCKING_OVERRIDE	BIT(11)
 #define LAN937X_TAIL_TAG_LOOKUP			BIT(12)
 #define LAN937X_TAIL_TAG_VALID			BIT(13)
+#define LAN937X_TAIL_TAG_PRIO			GENMASK(10, 8)
 #define LAN937X_TAIL_TAG_PORT_MASK		7
 
 static struct sk_buff *lan937x_xmit(struct sk_buff *skb,
 				    struct net_device *dev)
 {
+	u16 queue_mapping = skb_get_queue_mapping(skb);
+	u8 prio = netdev_txq_to_tc(dev, queue_mapping);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	const struct ethhdr *hdr = eth_hdr(skb);
 	__be16 *tag;
@@ -403,6 +416,8 @@ static struct sk_buff *lan937x_xmit(struct sk_buff *skb,
 
 	val = BIT(dp->index);
 
+	val |= FIELD_PREP(LAN937X_TAIL_TAG_PRIO, prio);
+
 	if (is_link_local_ether_addr(hdr->h_dest))
 		val |= LAN937X_TAIL_TAG_BLOCKING_OVERRIDE;
 
Signature · 1 line
2.36.1
#2 lore raw

PATCH v2 2/2 net: dsa: microchip: add support for credit based shaper

In reply to Arun Ramadoss

KSZ9477, KSZ9567, KSZ9563, KSZ8563 and LAN937x supports Credit based shaper. To differentiate the chip supporting cbs, tc_cbs_supported flag is introduced in ksz_chip_data.
And KSZ series has 16bit Credit increment registers whereas LAN937x has 24bit register. The value to be programmed in the credit increment is determined using the successive multiplication method to convert decimal fraction to hexadecimal fraction.
For example: if idleslope is 10000 and sendslope is -90000, then bandwidth is 10000 - (-90000) = 100000.
The 10% bandwidth of 100Mbps means 10/100 = 0.1(decimal). This value has to be converted to hexa.

1) 0.1 * 16 = 1.6  --> fraction 0.6 Carry = 1 (MSB)
2) 0.6 * 16 = 9.6  --> fraction 0.6 Carry = 9
3) 0.6 * 16 = 9.6  --> fraction 0.6 Carry = 9
4) 0.6 * 16 = 9.6  --> fraction 0.6 Carry = 9
5) 0.6 * 16 = 9.6  --> fraction 0.6 Carry = 9
6) 0.6 * 16 = 9.6  --> fraction 0.6 Carry = 9 (LSB)

Now 0.1(decimal) becomes 0.199999(Hex).
If it is LAN937x, 24 bit value will be programmed to Credit Inc register, 0x199999. For others 16 bit value will be prgrammed, 0x1999.

---
v1 -> v2
- checking the divide by zero error in cinc_cal

---
 drivers/net/dsa/microchip/ksz9477.c      |   7 ++
 drivers/net/dsa/microchip/ksz9477.h      |   1 +
 drivers/net/dsa/microchip/ksz9477_reg.h  |  27 +-----
 drivers/net/dsa/microchip/ksz_common.c   | 112 +++++++++++++++++++++++
 drivers/net/dsa/microchip/ksz_common.h   |  20 ++++
 drivers/net/dsa/microchip/lan937x.h      |   1 +
 drivers/net/dsa/microchip/lan937x_main.c |   5 +
 drivers/net/dsa/microchip/lan937x_reg.h  |   3 +
 8 files changed, 151 insertions(+), 25 deletions(-)
drivers/net/dsa/microchip/ksz9477.c +7 -0
index 6526c3c204bb..fd93e4595c2c 100644
@@ -1184,6 +1184,13 @@ u32 ksz9477_get_port_addr(int port, int offset)
 	return PORT_CTRL_ADDR(port, offset);
 }
 
+int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val)
+{
+	val = val >> 8;
+
+	return ksz_pwrite16(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val);
+}
+
 int ksz9477_switch_init(struct ksz_device *dev)
 {
 	u8 data8;
drivers/net/dsa/microchip/ksz9477.h +1 -0
index 2554cb63d326..b6f7e3c46e3f 100644
@@ -51,6 +51,7 @@ int ksz9477_mdb_del(struct ksz_device *dev, int port,
 		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
 int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu);
 void ksz9477_config_cpu_port(struct dsa_switch *ds);
+int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val);
 int ksz9477_enable_stp_addr(struct ksz_device *dev);
 int ksz9477_reset_switch(struct ksz_device *dev);
 int ksz9477_dsa_init(struct ksz_device *dev);
drivers/net/dsa/microchip/ksz9477_reg.h +2 -25
index b433a529cfec..cba3dba58bc3 100644
@@ -1484,33 +1484,10 @@
 
 /* 9 - Shaping */
 
-#define REG_PORT_MTI_QUEUE_INDEX__4	0x0900
+#define REG_PORT_MTI_QUEUE_CTRL_0__4   0x0904
 
-#define REG_PORT_MTI_QUEUE_CTRL_0__4	0x0904
+#define MTI_PVID_REPLACE               BIT(0)
 
-#define MTI_PVID_REPLACE		BIT(0)
-
-#define REG_PORT_MTI_QUEUE_CTRL_0	0x0914
-
-#define MTI_SCHEDULE_MODE_M		0x3
-#define MTI_SCHEDULE_MODE_S		6
-#define MTI_SCHEDULE_STRICT_PRIO	0
-#define MTI_SCHEDULE_WRR		2
-#define MTI_SHAPING_M			0x3
-#define MTI_SHAPING_S			4
-#define MTI_SHAPING_OFF			0
-#define MTI_SHAPING_SRP			1
-#define MTI_SHAPING_TIME_AWARE		2
-
-#define REG_PORT_MTI_QUEUE_CTRL_1	0x0915
-
-#define MTI_TX_RATIO_M			(BIT(7) - 1)
-
-#define REG_PORT_MTI_QUEUE_CTRL_2__2	0x0916
-#define REG_PORT_MTI_HI_WATER_MARK	0x0916
-#define REG_PORT_MTI_QUEUE_CTRL_3__2	0x0918
-#define REG_PORT_MTI_LO_WATER_MARK	0x0918
-#define REG_PORT_MTI_QUEUE_CTRL_4__2	0x091A
 #define REG_PORT_MTI_CREDIT_INCREMENT	0x091A
 
 /* A - QM */
drivers/net/dsa/microchip/ksz_common.c +112 -0

202 lines not on this page · raw message

drivers/net/dsa/microchip/ksz_common.h +20 -0
index 1a00143b0345..d2d5761d58e9 100644
@@ -50,6 +50,7 @@ struct ksz_chip_data {
 	int port_cnt;
 	u8 port_nirqs;
 	u8 num_tx_queues;
+	bool tc_cbs_supported;
 	const struct ksz_dev_ops *ops;
 	bool phy_errata_9477;
 	bool ksz87xx_eee_link_erratum;
@@ -354,6 +355,7 @@ struct ksz_dev_ops {
 				    struct phy_device *phydev, int speed,
 				    int duplex, bool tx_pause, bool rx_pause);
 	void (*setup_rgmii_delay)(struct ksz_device *dev, int port);
+	int (*tc_cbs_set_cinc)(struct ksz_device *dev, int port, u32 val);
 	void (*config_cpu_port)(struct dsa_switch *ds);
 	int (*enable_stp_addr)(struct ksz_device *dev);
 	int (*reset)(struct ksz_device *dev);
@@ -647,6 +649,24 @@ static inline int is_lan937x(struct ksz_device *dev)
 #define KSZ8_LEGAL_PACKET_SIZE		1518
 #define KSZ9477_MAX_FRAME_SIZE		9000
 
+/* CBS related registers */
+#define REG_PORT_MTI_QUEUE_INDEX__4	0x0900
+
+#define REG_PORT_MTI_QUEUE_CTRL_0	0x0914
+
+#define MTI_SCHEDULE_MODE_M		0x3
+#define MTI_SCHEDULE_MODE_S		6
+#define MTI_SCHEDULE_STRICT_PRIO	0
+#define MTI_SCHEDULE_WRR		2
+#define MTI_SHAPING_M			0x3
+#define MTI_SHAPING_S			4
+#define MTI_SHAPING_OFF			0
+#define MTI_SHAPING_SRP			1
+#define MTI_SHAPING_TIME_AWARE		2
+
+#define REG_PORT_MTI_HI_WATER_MARK	0x0916
+#define REG_PORT_MTI_LO_WATER_MARK	0x0918
+
 /* Regmap tables generation */
 #define KSZ_SPI_OP_RD		3
 #define KSZ_SPI_OP_WR		2
drivers/net/dsa/microchip/lan937x.h +1 -0
index 8e9e66d6728d..3388d91dbc44 100644
@@ -20,4 +20,5 @@ void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
 			      struct phylink_config *config);
 void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port);
 int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs);
+int lan937x_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val);
 #endif
drivers/net/dsa/microchip/lan937x_main.c +5 -0
index 923388f87996..399a3905e6ca 100644
@@ -340,6 +340,11 @@ void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port)
 	}
 }
 
+int lan937x_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val)
+{
+	return ksz_pwrite32(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val);
+}
+
 int lan937x_switch_init(struct ksz_device *dev)
 {
 	dev->port_mask = (1 << dev->info->port_cnt) - 1;
drivers/net/dsa/microchip/lan937x_reg.h +3 -0
index 5bc16a4c4441..45b606b6429f 100644
@@ -185,6 +185,9 @@
 
 #define P_PRIO_CTRL			REG_PORT_MRI_PRIO_CTRL
 
+/* 9 - Shaping */
+#define REG_PORT_MTI_CREDIT_INCREMENT	0x091C
+
 /* The port number as per the datasheet */
 #define RGMII_2_PORT_NUM		5
 #define RGMII_1_PORT_NUM		6
Signature · 1 line
2.36.1
#3 lore raw
In reply to Arun Ramadoss
This series was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:

Quoted 9 lines · On Fri, 20 Jan 2023 10:51:33 +0530 you wrote:

LAN937x switch family, KSZ9477, KSZ9567, KSZ9563 and KSZ8563 supports the credit based shaper. But there were few difference between LAN937x and KSZ switch like
- number of queues for LAN937x is 8 and for others it is 4.
- size of credit increment register for LAN937x is 24 and for other is 16-bit. This patch series add the credit based shaper with common implementation for LAN937x and KSZ swithes.

[...]

Here is the summary with links:
- [net-next,v2,1/2] net: dsa: microchip: enable port queues for tc mqprio

    https://git.kernel.org/netdev/net-next/c/e30f33a5f5c7
  - [net-next,v2,2/2] net: dsa: microchip: add support for credit based shaper
    https://git.kernel.org/netdev/net-next/c/71d7920fb2d1

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html