FAILED: patch "[PATCH] ARM: dts: exynos: correct TMU phandle in Odroid HC1" failed to apply to 4.19-stable tree

The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '[email protected]' --subject-prefix 'PATCH 4.19.y' HEAD^..

Possible dependencies:

2e3d0e20d845 ("ARM: dts: exynos: correct TMU phandle in Odroid HC1") 1c651356f482 ("ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <[email protected]>
Date: Thu, 9 Feb 2023 11:58:40 +0100
Subject: [PATCH] ARM: dts: exynos: correct TMU phandle in Odroid HC1

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. This was not critical before, but since rework of thermal Devicetree initialization in the commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization"), this leads to errors registering thermal zones other than first one:

thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0 exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2

index 3de7019572a2..5e4280393706 100644
@@ -31,7 +31,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */

@@ -86,7 +86,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;

@@ -130,7 +130,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;

@@ -174,7 +174,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;

@@ -218,7 +218,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;