Added USB Id & configuration array for Honestech Vidbox NW03
PATCH 2/2 Added USB Id & configuration array for Honestech Vidbox NW03
Adds support for the Honestech Vidbox NW03 USB capture device.
The device has an eMpia EMP202 audio chip which in my Vidbox has a Vendor Id identical to the STAC9750 therefore my previous patch to change the driver's Vendor ID recognition is also required for audio to work with this device.
Signed-off-by Gareth Williams <[email protected]>
--- linux/drivers/media/video/em28xx/em28xx-cards.c | 18 ++++++++++++++++++ linux/drivers/media/video/em28xx/em28xx.h | 1 + 2 files changed, 19 insertions(+), 0 deletions(-)
(quoted diff) +0 -0
b/linux/drivers/media/video/em28xx/em28xx-cards.c
index 1704da0..4f55962 100644
linux/drivers/media/video/em28xx/em28xx-cards.c +18 -0
@@ -1888,6 +1888,22 @@ struct em28xx_board em28xx_boards[] = { .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, +/* eb1a:5006 Honestech VIDBOX NW03 +* Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ + [EM2860_BOARD_HT_VIDBOX_NW03] = { + .name = "Honestech Vidbox NW03", + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, };const unsigned int em28xx_bcount =ARRAY_SIZE (em28xx_boards);
@@ -2027,6 +2043,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM28174_BOARD_PCTV_460E }, { USB_DEVICE(0x2040, 0x1605), .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, + { USB_DEVICE(0xeb1a, 0x5006), + .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, { }, };MODULE_DEVICE_TABLE (usb, em28xx_id_table);
(quoted diff) +0 -0
b/linux/drivers/media/video/em28xx/em28xx.h
index b1199ef..2dbb12c 100644
linux/drivers/media/video/em28xx/em28xx.h +1 -0
@@ -124,6 +124,7 @@#define EM28174_BOARD_PCTV_460E 80#define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C 81#define EM2884_BOARD_CINERGY_HTC_STICK 82 +#define EM2860_BOARD_HT_VIDBOX_NW03 83/* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4