OOPS - APIC or othere?
Hi All,
At one of our client I faced timer problem in kernel-2.4.26 and I tried to
fixed with patching "arch/i386/kernel/mpparse.c" file taken from patch-2.4.27.
... ... ...
Mikael Pettersson:
o i386 and x86_64 ACPI mpparse timer bug
... ... ...
After booting up the system now I get OOPS. Did I applied partial patch by
taking only patch for mpparse.c from the whole buntch? Does it broken dependency to some other functionality? I've ACPI support enabled into kernel.
Does following Len's patch provide solution to my OOPS?
ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/test/2.4.26-rc4/200 40422153228-irq2.patch
Here is output of ksymsoops.
Unable to handle Kernel NULL pointer dereference at virtual address 00000001 c02c4d80
*pde = 00000000
Oops: 0000 CPU: 0
EIP: 0010:[<c02c4d80>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010293
eax: 00000000 ebx: 00000011 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00000000 ebp: c02bbf38 esp: c02bbf2c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c02bb000)
Stack: C02bbf78 fffffffb c02bbf80 c02bbf9c c02c50de 00000000 00000000
00000000
00001000 00000011 00000010 c02bbf78 00001000 00000000 00000246
00000001
00000286 00000000 00000000 00000900 01000000 00000016 c02bbf98
c0117930
Call Trace: [<c0117930>] [<c0105000>] [<c0117930>] [<c0105000>]
[<c0105000>]
Code: 0f b6 44 d1 01 3b 45 10 75 26 0f b6 44 d7 06 3a 86 01 dc 2dQuoted 1 line
Quoted 1 line
EIP;
c02c4d80<find_irq_entry+30/70> <=====
Trace; c0117930 <printk+100/110>
Trace; c0105000 <_stext+0/0>
Trace; c0117930 <printk+100/110>
Trace; c0105000 <_stext+0/0>
Trace; c0105000 <_stext+0/0>
Code; c02c4d80 <find_irq_entry+30/70>
00000000 <_EIP>:
Code; c02c4d80 <find_irq_entry+30/70> <=====
0: 0f b6 44 d1 01 movzbl 0x1(%ecx,%edx,8),%eax <=====
Code; c02c4d85 <find_irq_entry+35/70>
5: 3b 45 10 cmp 0x10(%ebp),%eax
Code; c02c4d88 <find_irq_entry+38/70>
8: 75 26 jne 30 <_EIP+0x30> c02c4db0
<find_irq_entry+60/70>
Code; c02c4d8a <find_irq_entry+3a/70>
a: 0f b6 44 d7 06 movzbl 0x6(%edi,%edx,8),%eax
Code; c02c4d8f <find_irq_entry+3f/70>
f: 3a 86 01 dc 2d 00 cmp 0x2ddc01(%esi),%al
<0>Kernel Panic: Attempted to kill the idle task!
I can see following messages before OOPS
Enabled ExtINT on CPU#0
ESR Value before enabling vector : 00000000
ESR Value after enabling vector : 00000000
ENABLING IO-APIC IRQs
... Here OOPS start ....
One more point here is with same kernel source and its configuration and
SMP is enabled with 2 processors the kernel boots up. While it was giving oops in uniprocessor.
_____ __ __ ____ ____ __ ______
/\ ___\ /\ \ /\ \ /\ \ \/ /\ \ /\ \ /\__ _\
\ \ ____ \\ \ \\_| \\ \ \_ /\ \ \\ \ \\__ \ \/
\//\____ \\ \______ / \ \__\ \ \__\\ \__\ \ \__\
\/_____/ \/_____ / \/__/ \/__/ \/__/ \/__/
Quoted 4 lines · Sumit Pandya
Hi All,
At one of our client I faced timer problem in kernel-2.4.26 and I tried to
fixed with patching "arch/i386/kernel/mpparse.c" file taken from patch-2.4.27.
Quoted 8 lines
... ... ...
Mikael Pettersson:
o i386 andx86_64ACPI mpparse timer bug
... ... ...
After booting up the system now I get OOPS. Did I applied partial patch by
taking only patch formpparse.cfrom the whole buntch? Does it broken dependency to some other functionality? I've ACPI support enabled into kernel.
The effect of the bug was that the timer generated twice as many interrupts, making the kernel's wall-clock timer twice as fast.
There were no OOPS issues related with that patch. Therefore, your OOPS indicates dependencies on other changes in mpparse and/or the ACPI code. Why hack a 2.4.26 kernel in this way? Just put a 2.4.27 or 2.4.28-rc4 in there and be done with it :-)
/Mikael
Quoted 15 lines · Sumit Pandya
At one of our client I faced timer problem in kernel-2.4.26 and I tried to
fixed with patching "arch/i386/kernel/mpparse.c" file taken from patch-2.4.27.
... ... ...
Mikael Pettersson:
o i386 andx86_64ACPI mpparse timer bug
... ... ...
After booting up the system now I get OOPS. Did I applied partial patch by
taking only patch formpparse.cfrom the whole buntch? Does it broken dependency to some other functionality? I've ACPI support enabled into kernel.
Does following Len's patch provide solution to my OOPS?
ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/test/2.4.26-rc4/200 40422153228-irq2.patch
Quoted 1 line
Here is output of ksymsoops.
Sending bug reports for partially patched kernels isn't easy for us to debug, is there no way for you to simply try booting 2.4.27?
Thanks,
Zwane
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 2 lines · Sumit Pandya
Marcelo,
No other message except my name "Sumit" ?
Yes, because Zwane has written the message
"Sending bug report for partially patched kernel isn't easy for us to debug, is there no way for you to simply try booting 2.4.27?"
And I was assuming you read that. Did you?
The bugzilla entry makes it understand that Len has fixed the problem in 2.4.27:
------- Additional Comment #2 From Len Brown 2004-11-04 13:32 -------
shipped in 2.4.27 - closing
Quoted 3 lines
Any update in my problem
statement? My problem is having an embaded LinuxOS and changing kernel
version is very critical.
Zwane's statement is valid here.
Quoted 7 lines
Expecting just a quick answer from anyone. Could
following solution patch break any other functionality if applied on the top of 2.4.26?
http://bugzilla.kernel.org/show_bug.cgi?id=2834
I got attachemnt from the above link and applied patch. Above patch applies
nicely and runs without any problem. But wanted just a final confirmation from authers.
Seems to be doing its job then isnt it?
Quoted 36 lines
Thanks for your time,
-- SumitQuoted 17 lines
-----Original Message-----
From: Marcelo Tosatti [mailto:[email protected]]
Sent: Thursday, November 25, 2004 5:46 PMQuoted 3 lines · Zwane Mwaikambo
Quoted 1 line · Sumit Pandya
At one of our client I faced timer problem in kernel-2.4.26
and I tried to
Quoted 7 lines
Quoted 7 lines
fixed with patching "
arch/i386/kernel/mpparse.c" file taken from patch-2.4.27.
... ... ...
Mikael Pettersson:
o i386 andx86_64ACPI mpparse timer bug
... ... ...
After booting up the system now I get OOPS. Did I appliedQuoted 7 lines
partial patch by
Quoted 5 lines
Quoted 5 lines
taking only patch for
mpparse.cfrom the whole buntch? Does it broken dependency to some other functionality? I've ACPI support enabled into kernel.
Does following Len's patch provide solution to my OOPS?ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/test/2.4.
26-rc4/200
Quoted 6 lines
Quoted 3 lines
40422153228-irq2.patch
Here is output of ksymsoops.
Sending bug reports for partially patched kernels isn't easy for us to debug, is there no way for you to simply try booting 2.4.27?
Sumit?
Quoted 9 lines · Marcelo Tosatti
Quoted 2 lines · Sumit Pandya
Marcelo,
No other message except my name "Sumit" ?Yes, because Zwane has written the message
"Sending bug report for partially patched kernel isn't easy for us to debug, is there no way for you to simply try booting 2.4.27?"
Quoted 6 lines
And I was assuming you read that. Did you?
The bugzilla entry makes it understand that Len has fixed the problem in 2.4.27:
Seems to be doing its job then isnt it?
I agree with Marcelo, it looks like a fairly isolated change, if you can get by with applying only that patch then you'll be fine.
Thanks,
Zwane