Skip to contentSkip to conversation

aspeed add montblanc bmc reference from fuji

PATCH Superseded ~ssinprem 4 participants 8 messages Jun 28, 2023 – Jun 30, 2023 Arm/Aspeed machine support

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

~ssinprem

author
#0 lore raw

PATCH 1/1 aspeed add montblanc bmc reference from fuji

From: Sittisak Sinprem <[email protected]>

- I2C list follow I2C Tree v1.6 20230320
- fru eeprom data use FB FRU format version 4

---
 hw/arm/aspeed.c        | 67 ++++++++++++++++++++++++++++++++++++++++++
 hw/arm/aspeed_eeprom.c | 50 +++++++++++++++++++++++++++++++
 hw/arm/aspeed_eeprom.h |  7 +++++
 3 files changed, 124 insertions(+)
hw/arm/aspeed.c +67 -0
index 6880998484..df154cbf52 100644
@@ -182,6 +182,10 @@ struct AspeedMachineState {
 #define FUJI_BMC_HW_STRAP1    0x00000000
 #define FUJI_BMC_HW_STRAP2    0x00000000
 
+/* Montblanc hardware value */
+#define MONTBLANC_BMC_HW_STRAP1    0x00000000
+#define MONTBLANC_BMC_HW_STRAP2    0x00000000
+
 /* Bletchley hardware value */
 /* TODO: Leave same as EVB for now. */
 #define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
@@ -918,6 +922,39 @@ static void fuji_bmc_i2c_init(AspeedMachineState *bmc)
     }
 }
 
+static void montblanc_bmc_i2c_init(AspeedMachineState *bmc)
+{
+    AspeedSoCState *soc = &bmc->soc;
+    I2CBus *i2c[16] = {};
+
+    for (int i = 0; i < 16; i++) {
+        i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+    }
+
+    /* Ref from Minipack3_I2C_Tree_V1.6 20230320 */
+    at24c_eeprom_init(i2c[3], 0x56, montblanc_scm_fruid, 8192, true);
+    at24c_eeprom_init(i2c[6], 0x53, montblanc_fcm_fruid, 8192, true);
+
+    /* CPLD and FPGA */
+    aspeed_eeprom_init(i2c[1], 0x35, 256);  /* SCM CPLD */
+    aspeed_eeprom_init(i2c[5], 0x35, 256);  /* COMe CPLD TODO: need to update */
+    aspeed_eeprom_init(i2c[12], 0x60, 256); /* MCB PWR CPLD */
+    aspeed_eeprom_init(i2c[13], 0x35, 256); /* IOB FPGA */
+
+    /* on BMC board */
+    at24c_eeprom_init(i2c[8], 0x51, montblanc_bmc_fruid, 8192, true);
+                                                      /* BMC EEPROM */
+    i2c_slave_create_simple(i2c[8], TYPE_LM75, 0x48); /* Thermal Sensor */
+
+    /* COMe Sensor/EEPROM */
+    aspeed_eeprom_init(i2c[0], 0x56, 16384);          /* FRU EEPROM */
+    i2c_slave_create_simple(i2c[0], TYPE_LM75, 0x48); /* INLET Sensor */
+    i2c_slave_create_simple(i2c[0], TYPE_LM75, 0x4A); /* OUTLET Sensor */
+
+    /* It expects a pca9555 but a pca9552 is compatible */
+    create_pca9552(soc, 4, 0x27);
+}
+
 #define TYPE_TMP421 "tmp421"
 
 static void bletchley_bmc_i2c_init(AspeedMachineState *bmc)
@@ -1450,6 +1487,32 @@ static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)
         aspeed_soc_num_cpus(amc->soc_name);
 };
 
+/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
+#if HOST_LONG_BITS == 32
+#define MONTBLANC_BMC_RAM_SIZE (1 * GiB)
+#else
+#define MONTBLANC_BMC_RAM_SIZE (2 * GiB)
+#endif
+static void aspeed_machine_montblanc_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+    mc->desc = "Facebook Montblanc BMC (Cortex-A7)";
+    amc->soc_name = "ast2600-a3";
+    amc->hw_strap1 = MONTBLANC_BMC_HW_STRAP1;
+    amc->hw_strap2 = MONTBLANC_BMC_HW_STRAP2;
+    amc->fmc_model = "mx66l1g45g";
+    amc->spi_model = "mx66l1g45g";
+    amc->num_cs = 2;
+    amc->macs_mask = ASPEED_MAC3_ON;
+    amc->i2c_init = montblanc_bmc_i2c_init;
+    amc->uart_default = ASPEED_DEV_UART1;
+    mc->default_ram_size = MONTBLANC_BMC_RAM_SIZE;
+    mc->default_cpus = mc->min_cpus = mc->max_cpus =
+        aspeed_soc_num_cpus(amc->soc_name);
+};
+
 /* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
 #if HOST_LONG_BITS == 32
 #define BLETCHLEY_BMC_RAM_SIZE (1 * GiB)
@@ -1706,6 +1769,10 @@ static const TypeInfo aspeed_machine_types[] = {
         .name          = MACHINE_TYPE_NAME("fuji-bmc"),
         .parent        = TYPE_ASPEED_MACHINE,
         .class_init    = aspeed_machine_fuji_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("montblanc-bmc"),
+        .parent        = TYPE_ASPEED_MACHINE,
+        .class_init    = aspeed_machine_montblanc_class_init,
     }, {
         .name          = MACHINE_TYPE_NAME("bletchley-bmc"),
         .parent        = TYPE_ASPEED_MACHINE,
hw/arm/aspeed_eeprom.c +50 -0

59 lines not on this page · raw message

hw/arm/aspeed_eeprom.h +7 -0
index bbf9e54365..b8fbdd0734 100644
@@ -27,4 +27,11 @@ extern const size_t rainier_bb_fruid_len;
 extern const uint8_t rainier_bmc_fruid[];
 extern const size_t rainier_bmc_fruid_len;
 
+extern const uint8_t montblanc_scm_fruid[];
+extern const uint8_t montblanc_fcm_fruid[];
+extern const uint8_t montblanc_bmc_fruid[];
+extern const size_t montblanc_scm_fruid_len;
+extern const size_t montblanc_fcm_fruid_len;
+extern const size_t montblanc_bmc_fruid_len;
+
 #endif
Signature · 1 line
2.38.5
#1 lore raw

Hello Sittisak,

Quoted 6 lines · ~ssinprem

From: Sittisak Sinprem <[email protected]>

- I2C list follow I2C Tree v1.6 20230320
- fru eeprom data use FB FRU format version 4

You don't need to cc: [email protected] for new machines.

Quoted 26 lines
---
  hw/arm/aspeed.c        | 67 ++++++++++++++++++++++++++++++++++++++++++
  hw/arm/aspeed_eeprom.c | 50 +++++++++++++++++++++++++++++++
  hw/arm/aspeed_eeprom.h |  7 +++++
  3 files changed, 124 insertions(+)
hw/arm/aspeed.c +5 -0
index 6880998484..df154cbf52 100644
@@ -182,6 +182,10 @@ struct AspeedMachineState {
  #define FUJI_BMC_HW_STRAP1    0x00000000
  #define FUJI_BMC_HW_STRAP2    0x00000000
 
+/* Montblanc hardware value */
+#define MONTBLANC_BMC_HW_STRAP1    0x00000000
+#define MONTBLANC_BMC_HW_STRAP2    0x00000000
+
  /* Bletchley hardware value */
  /* TODO: Leave same as EVB for now. */
  #define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
@@ -918,6 +922,39 @@ static void fuji_bmc_i2c_init(AspeedMachineState *bmc)
      }
  }
 
+static void montblanc_bmc_i2c_init(AspeedMachineState *bmc)

hw/arm/aspeed.c static void fuji_bmc_i2c_init(AspeedMachineState *bmc) · line 935

Quoted 10 lines
hw/arm/aspeed.c +10 -0
+{
+    AspeedSoCState *soc = &bmc->soc;
+    I2CBus *i2c[16] = {};
+
+    for (int i = 0; i < 16; i++) {
+        i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+    }
+
+    /* Ref from Minipack3_I2C_Tree_V1.6 20230320 */
+    at24c_eeprom_init(i2c[3], 0x56, montblanc_scm_fruid, 8192, true);

I think you meant to use at24c_eeprom_init_rom ?

Thanks,

C.

Quoted 150 lines
hw/arm/aspeed.c +52 -0
+    at24c_eeprom_init(i2c[6], 0x53, montblanc_fcm_fruid, 8192, true);
+
+    /* CPLD and FPGA */
+    aspeed_eeprom_init(i2c[1], 0x35, 256);  /* SCM CPLD */
+    aspeed_eeprom_init(i2c[5], 0x35, 256);  /* COMe CPLD TODO: need to update */
+    aspeed_eeprom_init(i2c[12], 0x60, 256); /* MCB PWR CPLD */
+    aspeed_eeprom_init(i2c[13], 0x35, 256); /* IOB FPGA */
+
+    /* on BMC board */
+    at24c_eeprom_init(i2c[8], 0x51, montblanc_bmc_fruid, 8192, true);
+                                                      /* BMC EEPROM */
+    i2c_slave_create_simple(i2c[8], TYPE_LM75, 0x48); /* Thermal Sensor */
+
+    /* COMe Sensor/EEPROM */
+    aspeed_eeprom_init(i2c[0], 0x56, 16384);          /* FRU EEPROM */
+    i2c_slave_create_simple(i2c[0], TYPE_LM75, 0x48); /* INLET Sensor */
+    i2c_slave_create_simple(i2c[0], TYPE_LM75, 0x4A); /* OUTLET Sensor */
+
+    /* It expects a pca9555 but a pca9552 is compatible */
+    create_pca9552(soc, 4, 0x27);
+}
+
  #define TYPE_TMP421 "tmp421"
 
  static void bletchley_bmc_i2c_init(AspeedMachineState *bmc)
@@ -1450,6 +1487,32 @@ static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)
          aspeed_soc_num_cpus(amc->soc_name);
  };
 
+/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
+#if HOST_LONG_BITS == 32
+#define MONTBLANC_BMC_RAM_SIZE (1 * GiB)
+#else
+#define MONTBLANC_BMC_RAM_SIZE (2 * GiB)
+#endif
+static void aspeed_machine_montblanc_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+    mc->desc = "Facebook Montblanc BMC (Cortex-A7)";
+    amc->soc_name = "ast2600-a3";
+    amc->hw_strap1 = MONTBLANC_BMC_HW_STRAP1;
+    amc->hw_strap2 = MONTBLANC_BMC_HW_STRAP2;
+    amc->fmc_model = "mx66l1g45g";
+    amc->spi_model = "mx66l1g45g";
+    amc->num_cs = 2;
+    amc->macs_mask = ASPEED_MAC3_ON;
+    amc->i2c_init = montblanc_bmc_i2c_init;
+    amc->uart_default = ASPEED_DEV_UART1;
+    mc->default_ram_size = MONTBLANC_BMC_RAM_SIZE;
+    mc->default_cpus = mc->min_cpus = mc->max_cpus =
+        aspeed_soc_num_cpus(amc->soc_name);
+};
+
  /* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
  #if HOST_LONG_BITS == 32
  #define BLETCHLEY_BMC_RAM_SIZE (1 * GiB)
@@ -1706,6 +1769,10 @@ static const TypeInfo aspeed_machine_types[] = {
          .name          = MACHINE_TYPE_NAME("fuji-bmc"),
          .parent        = TYPE_ASPEED_MACHINE,
          .class_init    = aspeed_machine_fuji_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("montblanc-bmc"),
+        .parent        = TYPE_ASPEED_MACHINE,
+        .class_init    = aspeed_machine_montblanc_class_init,
      }, {
          .name          = MACHINE_TYPE_NAME("bletchley-bmc"),
          .parent        = TYPE_ASPEED_MACHINE,
hw/arm/aspeed_eeprom.c +50 -0
index ace5266cec..bcde346e9b 100644
@@ -161,6 +161,53 @@ const uint8_t rainier_bmc_fruid[] = {
      0x31, 0x50, 0x46, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
  };
 
+/* Montblanc BMC FRU */
+const uint8_t montblanc_scm_fruid[8192] = {
+    0xfb, 0xfb, 0x04, 0xff, 0x01, 0x0d, 0x4d, 0x49, 0x4e, 0x49, 0x50, 0x41,
+    0x43, 0x4b, 0x33, 0x5f, 0x53, 0x43, 0x4d, 0x02, 0x08, 0x32, 0x30, 0x30,
+    0x30, 0x32, 0x39, 0x34, 0x35, 0x04, 0x0c, 0x31, 0x33, 0x32, 0x30, 0x30,
+    0x30, 0x31, 0x36, 0x34, 0x30, 0x31, 0x20, 0x05, 0x0c, 0x31, 0x33, 0x31,
+    0x30, 0x30, 0x30, 0x31, 0x32, 0x37, 0x30, 0x31, 0x20, 0x06, 0x0c, 0x52,
+    0x33, 0x32, 0x31, 0x34, 0x47, 0x30, 0x30, 0x30, 0x33, 0x30, 0x31, 0x07,
+    0x0d, 0x41, 0x30, 0x33, 0x31, 0x33, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58,
+    0x58, 0x58, 0x08, 0x01, 0x01, 0x09, 0x01, 0x00, 0x0a, 0x01, 0x00, 0x0b,
+    0x0d, 0x4d, 0x32, 0x32, 0x31, 0x33, 0x32, 0x33, 0x31, 0x37, 0x30, 0x30,
+    0x30, 0x32, 0x0c, 0x03, 0x43, 0x4c, 0x53, 0x0d, 0x08, 0x32, 0x30, 0x32,
+    0x33, 0x30, 0x35, 0x30, 0x31, 0x0e, 0x03, 0x57, 0x55, 0x53, 0x0f, 0x03,
+    0x43, 0x54, 0x48, 0x10, 0x06, 0xb4, 0xbd, 0x00, 0x00, 0x00, 0x01, 0x13,
+    0x03, 0x53, 0x43, 0x4d, 0xfa, 0x02, 0x11, 0x07,
+};
+
+const uint8_t montblanc_fcm_fruid[8192] = {
+    0xfb, 0xfb, 0x04, 0xff, 0x01, 0x0d, 0x4d, 0x49, 0x4e, 0x49, 0x50, 0x41,
+    0x43, 0x4b, 0x33, 0x5f, 0x46, 0x43, 0x42, 0x02, 0x08, 0x33, 0x30, 0x30,
+    0x30, 0x30, 0x31, 0x36, 0x31, 0x04, 0x0c, 0x31, 0x33, 0x32, 0x30, 0x30,
+    0x30, 0x31, 0x36, 0x33, 0x30, 0x31, 0x20, 0x05, 0x0c, 0x31, 0x33, 0x31,
+    0x30, 0x30, 0x30, 0x31, 0x33, 0x30, 0x30, 0x31, 0x20, 0x06, 0x0c, 0x52,
+    0x33, 0x32, 0x31, 0x34, 0x47, 0x30, 0x30, 0x31, 0x32, 0x30, 0x31, 0x07,
+    0x0d, 0x41, 0x31, 0x32, 0x31, 0x32, 0x58, 0x58, 0x58, 0x58, 0x58, 0x58,
+    0x58, 0x58, 0x08, 0x01, 0x01, 0x09, 0x01, 0x00, 0x0a, 0x01, 0x00, 0x0b,
+    0x0d, 0x46, 0x35, 0x30, 0x31, 0x33, 0x32, 0x33, 0x31, 0x37, 0x30, 0x30,
+    0x30, 0x35, 0x0c, 0x03, 0x43, 0x4c, 0x53, 0x0d, 0x08, 0x32, 0x30, 0x32,
+    0x33, 0x30, 0x35, 0x30, 0x31, 0x0e, 0x03, 0x57, 0x55, 0x53, 0x0f, 0x03,
+    0x43, 0x54, 0x48, 0x10, 0x06, 0xb4, 0xbd, 0x00, 0x00, 0x00, 0x02, 0x11,
+    0x06, 0xb4, 0xbd, 0x00, 0x00, 0x00, 0x03, 0x12, 0x02, 0x8a, 0x00, 0x13,
+    0x03, 0x46, 0x43, 0x42, 0xfa, 0x02, 0x0e, 0x61,
+};
+
+const uint8_t montblanc_bmc_fruid[8192] = {
+    0xfb, 0xfb, 0x04, 0xff, 0x01, 0x0d, 0x4d, 0x49, 0x4e, 0x49, 0x50, 0x41,
+    0x43, 0x4b, 0x33, 0x5f, 0x42, 0x4d, 0x43, 0x04, 0x0c, 0x31, 0x33, 0x32,
+    0x30, 0x30, 0x30, 0x31, 0x33, 0x36, 0x30, 0x31, 0x20, 0x05, 0x0c, 0x31,
+    0x33, 0x31, 0x30, 0x30, 0x30, 0x30, 0x38, 0x36, 0x30, 0x35, 0x20, 0x06,
+    0x0c, 0x52, 0x33, 0x30, 0x39, 0x37, 0x47, 0x30, 0x30, 0x30, 0x32, 0x30,
+    0x37, 0x07, 0x0d, 0x42, 0x30, 0x32, 0x37, 0x34, 0x58, 0x58, 0x58, 0x58,
+    0x58, 0x58, 0x58, 0x58, 0x08, 0x01, 0x04, 0x09, 0x01, 0x00, 0x0a, 0x01,
+    0x00, 0x0c, 0x03, 0x43, 0x4c, 0x53, 0x0d, 0x08, 0x32, 0x30, 0x32, 0x33,
+    0x30, 0x35, 0x30, 0x31, 0x0e, 0x03, 0x57, 0x55, 0x53, 0x0f, 0x03, 0x43,
+    0x54, 0x48, 0x13, 0x03, 0x42, 0x4d, 0x43, 0xfa, 0x02, 0xef, 0xba,
+};
+
  const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid);
  const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid);
  const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid);
@@ -168,3 +215,6 @@ const size_t fby35_bmc_fruid_len = sizeof(fby35_bmc_fruid);
  const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid);
  const size_t rainier_bb_fruid_len = sizeof(rainier_bb_fruid);
  const size_t rainier_bmc_fruid_len = sizeof(rainier_bmc_fruid);
+const size_t montblanc_scm_fruid_len = sizeof(montblanc_scm_fruid);
+const size_t montblanc_fcm_fruid_len = sizeof(montblanc_fcm_fruid);
+const size_t montblanc_bmc_fruid_len = sizeof(montblanc_bmc_fruid);
hw/arm/aspeed_eeprom.h +7 -0
index bbf9e54365..b8fbdd0734 100644
@@ -27,4 +27,11 @@ extern const size_t rainier_bb_fruid_len;
  extern const uint8_t rainier_bmc_fruid[];
  extern const size_t rainier_bmc_fruid_len;
 
+extern const uint8_t montblanc_scm_fruid[];
+extern const uint8_t montblanc_fcm_fruid[];
+extern const uint8_t montblanc_bmc_fruid[];
+extern const size_t montblanc_scm_fruid_len;
+extern const size_t montblanc_fcm_fruid_len;
+extern const size_t montblanc_bmc_fruid_len;
+
  #endif
#2 lore raw

Got it Cedric, I just know for it,

I am fixing, and will re-send the patch as V2.

Quoted 249 lines · Cédric Le Goater

Hello Sittisak,

Quoted 6 lines · ~ssinprem

From: Sittisak Sinprem <[email protected]>

- I2C list follow I2C Tree v1.6 20230320
- fru eeprom data use FB FRU format version 4

You don't need to cc: [email protected] for new machines.

hw/arm/aspeed.c static void fuji_bmc_i2c_init(AspeedMachineState

Quoted 22 lines
---
  hw/arm/aspeed.c        | 67 ++++++++++++++++++++++++++++++++++++++++++
  hw/arm/aspeed_eeprom.c | 50 +++++++++++++++++++++++++++++++
  hw/arm/aspeed_eeprom.h |  7 +++++
  3 files changed, 124 insertions(+)
hw/arm/aspeed.c +4 -0
index 6880998484..df154cbf52 100644
@@ -182,6 +182,10 @@ struct AspeedMachineState {
  #define FUJI_BMC_HW_STRAP1    0x00000000
  #define FUJI_BMC_HW_STRAP2    0x00000000
 
+/* Montblanc hardware value */
+#define MONTBLANC_BMC_HW_STRAP1    0x00000000
+#define MONTBLANC_BMC_HW_STRAP2    0x00000000
+
  /* Bletchley hardware value */
  /* TODO: Leave same as EVB for now. */
  #define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
@@ -918,6 +922,39 @@ static void fuji_bmc_i2c_init(AspeedMachineState

*bmc)

Quoted 4 lines
hw/arm/aspeed.c +1 -0
      }
  }
 
+static void montblanc_bmc_i2c_init(AspeedMachineState *bmc)

hw/arm/aspeed.c static void fuji_bmc_i2c_init(AspeedMachineState *bmc) · line 935

Quoted 10 lines
hw/arm/aspeed.c +10 -0
+{
+    AspeedSoCState *soc = &bmc->soc;
+    I2CBus *i2c[16] = {};
+
+    for (int i = 0; i < 16; i++) {
+        i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+    }
+
+    /* Ref from Minipack3_I2C_Tree_V1.6 20230320 */
+    at24c_eeprom_init(i2c[3], 0x56, montblanc_scm_fruid, 8192, true);

I think you meant to use at24c_eeprom_init_rom ?

Thanks,

C.

hw/arm/aspeed.c static void fuji_bmc_i2c_init(AspeedMachineState *bmc)

Quoted 5 lines
hw/arm/aspeed.c +5 -0
+    at24c_eeprom_init(i2c[6], 0x53, montblanc_fcm_fruid, 8192, true);
+
+    /* CPLD and FPGA */
+    aspeed_eeprom_init(i2c[1], 0x35, 256);  /* SCM CPLD */
+    aspeed_eeprom_init(i2c[5], 0x35, 256);  /* COMe CPLD TODO: need to

update */

hw/arm/aspeed.c static void fuji_bmc_i2c_init(AspeedMachineState *bmc)

Quoted 7 lines
hw/arm/aspeed.c +7 -0
+    aspeed_eeprom_init(i2c[12], 0x60, 256); /* MCB PWR CPLD */
+    aspeed_eeprom_init(i2c[13], 0x35, 256); /* IOB FPGA */
+
+    /* on BMC board */
+    at24c_eeprom_init(i2c[8], 0x51, montblanc_bmc_fruid, 8192, true);
+                                                      /* BMC EEPROM */
+    i2c_slave_create_simple(i2c[8], TYPE_LM75, 0x48); /* Thermal Sensor

*/

hw/arm/aspeed.c static void fuji_bmc_i2c_init(AspeedMachineState *bmc)

Quoted 5 lines
hw/arm/aspeed.c +5 -0
+
+    /* COMe Sensor/EEPROM */
+    aspeed_eeprom_init(i2c[0], 0x56, 16384);          /* FRU EEPROM */
+    i2c_slave_create_simple(i2c[0], TYPE_LM75, 0x48); /* INLET Sensor */
+    i2c_slave_create_simple(i2c[0], TYPE_LM75, 0x4A); /* OUTLET Sensor

*/

hw/arm/aspeed.c static void

Quoted 9 lines
hw/arm/aspeed.c +5 -0
+
+    /* It expects a pca9555 but a pca9552 is compatible */
+    create_pca9552(soc, 4, 0x27);
+}
+
  #define TYPE_TMP421 "tmp421"
 
  static void bletchley_bmc_i2c_init(AspeedMachineState *bmc)
@@ -1450,6 +1487,32 @@ static void

aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)

hw/arm/aspeed.c static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)

Quoted 10 lines
hw/arm/aspeed.c +7 -0
          aspeed_soc_num_cpus(amc->soc_name);
  };
 
+/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
+#if HOST_LONG_BITS == 32
+#define MONTBLANC_BMC_RAM_SIZE (1 * GiB)
+#else
+#define MONTBLANC_BMC_RAM_SIZE (2 * GiB)
+#endif
+static void aspeed_machine_montblanc_class_init(ObjectClass *oc, void

*data)

Quoted 38 lines
hw/arm/aspeed.c +23 -0
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+    mc->desc = "Facebook Montblanc BMC (Cortex-A7)";
+    amc->soc_name = "ast2600-a3";
+    amc->hw_strap1 = MONTBLANC_BMC_HW_STRAP1;
+    amc->hw_strap2 = MONTBLANC_BMC_HW_STRAP2;
+    amc->fmc_model = "mx66l1g45g";
+    amc->spi_model = "mx66l1g45g";
+    amc->num_cs = 2;
+    amc->macs_mask = ASPEED_MAC3_ON;
+    amc->i2c_init = montblanc_bmc_i2c_init;
+    amc->uart_default = ASPEED_DEV_UART1;
+    mc->default_ram_size = MONTBLANC_BMC_RAM_SIZE;
+    mc->default_cpus = mc->min_cpus = mc->max_cpus =
+        aspeed_soc_num_cpus(amc->soc_name);
+};
+
  /* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
  #if HOST_LONG_BITS == 32
  #define BLETCHLEY_BMC_RAM_SIZE (1 * GiB)
@@ -1706,6 +1769,10 @@ static const TypeInfo aspeed_machine_types[] = {
          .name          = MACHINE_TYPE_NAME("fuji-bmc"),
          .parent        = TYPE_ASPEED_MACHINE,
          .class_init    = aspeed_machine_fuji_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("montblanc-bmc"),
+        .parent        = TYPE_ASPEED_MACHINE,
+        .class_init    = aspeed_machine_montblanc_class_init,
      }, {
          .name          = MACHINE_TYPE_NAME("bletchley-bmc"),
          .parent        = TYPE_ASPEED_MACHINE,
hw/arm/aspeed_eeprom.c +0 -0
index ace5266cec..bcde346e9b 100644

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 166

Quoted 6 lines
hw/arm/aspeed_eeprom.c +3 -0
@@ -161,6 +161,53 @@ const uint8_t rainier_bmc_fruid[] = {
      0x31, 0x50, 0x46, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
  };
 
+/* Montblanc BMC FRU */
+const uint8_t montblanc_scm_fruid[8192] = {
+    0xfb, 0xfb, 0x04, 0xff, 0x01, 0x0d, 0x4d, 0x49, 0x4e, 0x49, 0x50,

0x41,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 167

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x43, 0x4b, 0x33, 0x5f, 0x53, 0x43, 0x4d, 0x02, 0x08, 0x32, 0x30,

0x30,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 168

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x32, 0x39, 0x34, 0x35, 0x04, 0x0c, 0x31, 0x33, 0x32, 0x30,

0x30,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 169

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x31, 0x36, 0x34, 0x30, 0x31, 0x20, 0x05, 0x0c, 0x31, 0x33,

0x31,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 170

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x30, 0x30, 0x31, 0x32, 0x37, 0x30, 0x31, 0x20, 0x06, 0x0c,

0x52,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 171

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x33, 0x32, 0x31, 0x34, 0x47, 0x30, 0x30, 0x30, 0x33, 0x30, 0x31,

0x07,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 172

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x0d, 0x41, 0x30, 0x33, 0x31, 0x33, 0x58, 0x58, 0x58, 0x58, 0x58,

0x58,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 173

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x58, 0x58, 0x08, 0x01, 0x01, 0x09, 0x01, 0x00, 0x0a, 0x01, 0x00,

0x0b,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 174

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x0d, 0x4d, 0x32, 0x32, 0x31, 0x33, 0x32, 0x33, 0x31, 0x37, 0x30,

0x30,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 175

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x32, 0x0c, 0x03, 0x43, 0x4c, 0x53, 0x0d, 0x08, 0x32, 0x30,

0x32,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 176

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x33, 0x30, 0x35, 0x30, 0x31, 0x0e, 0x03, 0x57, 0x55, 0x53, 0x0f,

0x03,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 177

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x43, 0x54, 0x48, 0x10, 0x06, 0xb4, 0xbd, 0x00, 0x00, 0x00, 0x01,

0x13,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = {

Quoted 5 lines
hw/arm/aspeed_eeprom.c +5 -0
+    0x03, 0x53, 0x43, 0x4d, 0xfa, 0x02, 0x11, 0x07,
+};
+
+const uint8_t montblanc_fcm_fruid[8192] = {
+    0xfb, 0xfb, 0x04, 0xff, 0x01, 0x0d, 0x4d, 0x49, 0x4e, 0x49, 0x50,

0x41,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 183

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x43, 0x4b, 0x33, 0x5f, 0x46, 0x43, 0x42, 0x02, 0x08, 0x33, 0x30,

0x30,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 184

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x30, 0x31, 0x36, 0x31, 0x04, 0x0c, 0x31, 0x33, 0x32, 0x30,

0x30,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 185

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x31, 0x36, 0x33, 0x30, 0x31, 0x20, 0x05, 0x0c, 0x31, 0x33,

0x31,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 186

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x30, 0x30, 0x31, 0x33, 0x30, 0x30, 0x31, 0x20, 0x06, 0x0c,

0x52,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 187

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x33, 0x32, 0x31, 0x34, 0x47, 0x30, 0x30, 0x31, 0x32, 0x30, 0x31,

0x07,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 188

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x0d, 0x41, 0x31, 0x32, 0x31, 0x32, 0x58, 0x58, 0x58, 0x58, 0x58,

0x58,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 189

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x58, 0x58, 0x08, 0x01, 0x01, 0x09, 0x01, 0x00, 0x0a, 0x01, 0x00,

0x0b,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 190

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x0d, 0x46, 0x35, 0x30, 0x31, 0x33, 0x32, 0x33, 0x31, 0x37, 0x30,

0x30,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 191

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x35, 0x0c, 0x03, 0x43, 0x4c, 0x53, 0x0d, 0x08, 0x32, 0x30,

0x32,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 192

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x33, 0x30, 0x35, 0x30, 0x31, 0x0e, 0x03, 0x57, 0x55, 0x53, 0x0f,

0x03,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 193

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x43, 0x54, 0x48, 0x10, 0x06, 0xb4, 0xbd, 0x00, 0x00, 0x00, 0x02,

0x11,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 194

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x06, 0xb4, 0xbd, 0x00, 0x00, 0x00, 0x03, 0x12, 0x02, 0x8a, 0x00,

0x13,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = {

Quoted 5 lines
hw/arm/aspeed_eeprom.c +5 -0
+    0x03, 0x46, 0x43, 0x42, 0xfa, 0x02, 0x0e, 0x61,
+};
+
+const uint8_t montblanc_bmc_fruid[8192] = {
+    0xfb, 0xfb, 0x04, 0xff, 0x01, 0x0d, 0x4d, 0x49, 0x4e, 0x49, 0x50,

0x41,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 200

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x43, 0x4b, 0x33, 0x5f, 0x42, 0x4d, 0x43, 0x04, 0x0c, 0x31, 0x33,

0x32,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 201

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x30, 0x30, 0x31, 0x33, 0x36, 0x30, 0x31, 0x20, 0x05, 0x0c,

0x31,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 202

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x33, 0x31, 0x30, 0x30, 0x30, 0x30, 0x38, 0x36, 0x30, 0x35, 0x20,

0x06,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 203

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x0c, 0x52, 0x33, 0x30, 0x39, 0x37, 0x47, 0x30, 0x30, 0x30, 0x32,

0x30,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 204

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x37, 0x07, 0x0d, 0x42, 0x30, 0x32, 0x37, 0x34, 0x58, 0x58, 0x58,

0x58,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 205

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x58, 0x58, 0x58, 0x58, 0x08, 0x01, 0x04, 0x09, 0x01, 0x00, 0x0a,

0x01,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 206

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x00, 0x0c, 0x03, 0x43, 0x4c, 0x53, 0x0d, 0x08, 0x32, 0x30, 0x32,

0x33,

hw/arm/aspeed_eeprom.c const uint8_t rainier_bmc_fruid[] = { · line 207

Quoted 1 line
hw/arm/aspeed_eeprom.c +1 -0
+    0x30, 0x35, 0x30, 0x31, 0x0e, 0x03, 0x57, 0x55, 0x53, 0x0f, 0x03,

0x43,

hw/arm/aspeed_eeprom.c const size_t fby35_bmc_fruid_len =

Quoted 7 lines
hw/arm/aspeed_eeprom.c +3 -0
+    0x54, 0x48, 0x13, 0x03, 0x42, 0x4d, 0x43, 0xfa, 0x02, 0xef, 0xba,
+};
+
  const size_t tiogapass_bmc_fruid_len = sizeof(tiogapass_bmc_fruid);
  const size_t fby35_nic_fruid_len = sizeof(fby35_nic_fruid);
  const size_t fby35_bb_fruid_len = sizeof(fby35_bb_fruid);
@@ -168,3 +215,6 @@ const size_t fby35_bmc_fruid_len =

sizeof(fby35_bmc_fruid);

Quoted 22 lines
hw/arm/aspeed_eeprom.c +3 -0
  const size_t yosemitev2_bmc_fruid_len = sizeof(yosemitev2_bmc_fruid);
  const size_t rainier_bb_fruid_len = sizeof(rainier_bb_fruid);
  const size_t rainier_bmc_fruid_len = sizeof(rainier_bmc_fruid);
+const size_t montblanc_scm_fruid_len = sizeof(montblanc_scm_fruid);
+const size_t montblanc_fcm_fruid_len = sizeof(montblanc_fcm_fruid);
+const size_t montblanc_bmc_fruid_len = sizeof(montblanc_bmc_fruid);
hw/arm/aspeed_eeprom.h +7 -0
index bbf9e54365..b8fbdd0734 100644
@@ -27,4 +27,11 @@ extern const size_t rainier_bb_fruid_len;
  extern const uint8_t rainier_bmc_fruid[];
  extern const size_t rainier_bmc_fruid_len;
 
+extern const uint8_t montblanc_scm_fruid[];
+extern const uint8_t montblanc_fcm_fruid[];
+extern const uint8_t montblanc_bmc_fruid[];
+extern const size_t montblanc_scm_fruid_len;
+extern const size_t montblanc_fcm_fruid_len;
+extern const size_t montblanc_bmc_fruid_len;
+
  #endif
#3 lore raw
Quoted 3 lines · Sittisak Sinprem

Got it Cedric, I just know for it,

I am fixing, and will re-send the patch as V2.

Could you please use the patch below and send in your series ?

Thanks,

C.

From cfbc865ffe8a4dffe4ac764eb10416aa906a7170 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= <[email protected]>
Date: Wed, 28 Jun 2023 18:32:20 +0200
Subject: [PATCH] aspeed: Introduce ASPEED_RAM_SIZE helper for 32-bit hosts
limitation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On 32-bit hosts, RAM has a 2047 MB limit. Use a macro to define the default ram size of machines (AST2600 SoC) that can have 2 GB.

---
 hw/arm/aspeed.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)
hw/arm/aspeed.c +9 -12
index eefd2e275015..0ae252232597 100644
@@ -49,6 +49,13 @@ struct AspeedMachineState {
     uint32_t hw_strap1;
 };
 
+/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
+#if HOST_LONG_BITS == 32
+#define ASPEED_RAM_SIZE(sz) MIN((sz), 1 * GiB)
+#else
+#define ASPEED_RAM_SIZE(sz) (sz)
+#endif
+
 /* Palmetto hardware value: 0x120CE416 */
 #define PALMETTO_BMC_HW_STRAP1 (                                        \
         SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) |               \
@@ -1504,12 +1511,7 @@ static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data)
     aspeed_machine_ast2600_class_init(oc, data);
 };
 
-/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
-#if HOST_LONG_BITS == 32
-#define FUJI_BMC_RAM_SIZE (1 * GiB)
-#else
-#define FUJI_BMC_RAM_SIZE (2 * GiB)
-#endif
+#define FUJI_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
 
 static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)
 {
@@ -1533,12 +1535,7 @@ static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)
     aspeed_machine_ast2600_class_init(oc, data);
 };
 
-/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
-#if HOST_LONG_BITS == 32
-#define BLETCHLEY_BMC_RAM_SIZE (1 * GiB)
-#else
-#define BLETCHLEY_BMC_RAM_SIZE (2 * GiB)
-#endif
+#define BLETCHLEY_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
 
 static void aspeed_machine_bletchley_class_init(ObjectClass *oc, void *data)
 {
Signature · 1 line
2.41.0
#4 lore raw

Hi Cédric,

I had fixed the function name to support in current branch, but facing about below error while starting

./build/qemu-system-arm -machine montblanc-bmc -drive

Quoted 4 lines

file=~/flash-montblanc,format=raw,if=mtd -nographic -netdev tap,id=netdev0,script=no,downscript=no,ifname=tap0 -net nic,netdev=netdev0,model=ftgmac100

qemu-system-arm: device requires 134217728 bytes, block backend provides

Quoted 1 line

27726336 bytes

Quoted 83 lines · Cédric Le Goater
Quoted 3 lines · Sittisak Sinprem

Got it Cedric, I just know for it,

I am fixing, and will re-send the patch as V2.

Could you please use the patch below and send in your series ?

Thanks,

C.

From cfbc865ffe8a4dffe4ac764eb10416aa906a7170 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= <[email protected]>
Date: Wed, 28 Jun 2023 18:32:20 +0200
Subject: [PATCH] aspeed: Introduce ASPEED_RAM_SIZE helper for 32-bit hosts
limitation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On 32-bit hosts, RAM has a 2047 MB limit. Use a macro to define the default ram size of machines (AST2600 SoC) that can have 2 GB.

---
  hw/arm/aspeed.c | 21 +++++++++------------
  1 file changed, 9 insertions(+), 12 deletions(-)
hw/arm/aspeed.c +8 -6
index eefd2e275015..0ae252232597 100644
@@ -49,6 +49,13 @@ struct AspeedMachineState {
      uint32_t hw_strap1;
  };
 
+/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
+#if HOST_LONG_BITS == 32
+#define ASPEED_RAM_SIZE(sz) MIN((sz), 1 * GiB)
+#else
+#define ASPEED_RAM_SIZE(sz) (sz)
+#endif
+
  /* Palmetto hardware value: 0x120CE416 */
  #define PALMETTO_BMC_HW_STRAP1 (                                        \
          SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) |               \
@@ -1504,12 +1511,7 @@ static void
 aspeed_machine_rainier_class_init(ObjectClass *oc, void *data)
      aspeed_machine_ast2600_class_init(oc, data);
  };
 
-/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
-#if HOST_LONG_BITS == 32
-#define FUJI_BMC_RAM_SIZE (1 * GiB)
-#else
-#define FUJI_BMC_RAM_SIZE (2 * GiB)
-#endif
+#define FUJI_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
 
  static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)
  {
hw/arm/aspeed.c +1 -6
@@ -1533,12 +1535,7 @@ static void
 aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)
      aspeed_machine_ast2600_class_init(oc, data);
  };
 
-/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
-#if HOST_LONG_BITS == 32
-#define BLETCHLEY_BMC_RAM_SIZE (1 * GiB)
-#else
-#define BLETCHLEY_BMC_RAM_SIZE (2 * GiB)
-#endif
+#define BLETCHLEY_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
 
  static void aspeed_machine_bletchley_class_init(ObjectClass *oc, void

*data)
{
--
2.41.0

#5 lore raw
Quoted 8 lines · Sittisak Sinprem

Hi Cédric,

I had fixed the function name to support in current branch, but facing about below error while starting

./build/qemu-system-arm -machine montblanc-bmc  -drive file=~/flash-montblanc,format=raw,if=mtd -nographic -netdev tap,id=netdev0,script=no,downscript=no,ifname=tap0 -net nic,netdev=netdev0,model=ftgmac100

qemu-system-arm: device requires 134217728 bytes, block backend provides 27726336 bytes

File ~/flash-montblanc is too big for the mx66l1g45g flash device and 128MB is expected. Use truncate maybe.

Thanks,

C.

#6 lore raw
In reply to ~ssinprem
Quoted 4 lines · ~ssinprem

From: Sittisak Sinprem <[email protected]>

- I2C list follow I2C Tree v1.6 20230320
- fru eeprom data use FB FRU format version 4

I don't think this qualifies for -stable. Unless it is fixing quite a serious issue in existing code in the process.

I'd love to hear some comments about this one.

Thanks,

/mjt

#7 lore raw
Quoted 10 lines · Michael Tokarev
Quoted 4 lines · ~ssinprem

From: Sittisak Sinprem <[email protected]>

- I2C list follow I2C Tree v1.6 20230320
- fru eeprom data use FB FRU format version 4

I don't think this qualifies for -stable. Unless it is fixing quite a serious issue in existing code in the process.

I'd love to hear some comments about this one.

This is new stuff. Not for -stable.

Thanks,

C.