Skip to contentSkip to conversation

Bluetooth: btusb: mediatek: readx_poll_timeout replaces open coding

PATCH Applied [email protected] 3 participants 5 messages Jun 28, 2023 – Jun 29, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v8 1/3 Bluetooth: btusb: mediatek: readx_poll_timeout replaces open coding

From: Sean Wang <[email protected]>

Use readx_poll_timeout instead of open coding to poll the hardware reset status until it is done.

---
v2: use 20ms as the unit to poll according to the requirement of
readx_poll_timeout
v3: refine btusb_mtk_reset_done and drop the necessary error check
in btusb_mtk_cmd_timeout
v4, v5, v6 and v7: rebase onto the latest codebase
v8: fixed GitLint failure

---
 drivers/bluetooth/btusb.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/bluetooth/btusb.c +15 -15
index cb58691b63ca..4c38d1c0f059 100644
@@ -2657,8 +2657,6 @@ static int btusb_recv_event_realtek(struct hci_dev *hdev, struct sk_buff *skb)
 #define MTK_EP_RST_OPT		0x74011890
 #define MTK_EP_RST_IN_OUT_OPT	0x00010001
 #define MTK_BT_RST_DONE		0x00000100
-#define MTK_BT_RESET_WAIT_MS	100
-#define MTK_BT_RESET_NUM_TRIES	10
 #define MTK_BT_RESET_REG_CONNV3	0x70028610
 #define MTK_BT_READ_DEV_ID	0x70010200
 
@@ -3032,6 +3030,16 @@ static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id)
 	return btusb_mtk_reg_read(data, reg, id);
 }
 
+static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u32 val = 0;
+
+	btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
+
+	return val & MTK_BT_RST_DONE;
+}
+
 static int btusb_mtk_setup(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -3232,7 +3240,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u32 val;
-	int err, retry = 0;
+	int err;
 	struct btmediatek_data *mediatek;
 
 	/* It's MediaTek specific bluetooth reset mechanism via USB */
@@ -3284,18 +3292,10 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
 	}
 
-	/* Poll the register until reset is completed */
-	do {
-		btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
-		if (val & MTK_BT_RST_DONE) {
-			bt_dev_dbg(hdev, "Bluetooth Reset Successfully");
-			break;
-		}
-
-		bt_dev_dbg(hdev, "Polling Bluetooth Reset CR");
-		retry++;
-		msleep(MTK_BT_RESET_WAIT_MS);
-	} while (retry < MTK_BT_RESET_NUM_TRIES);
+	err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
+				 val & MTK_BT_RST_DONE, 20000, 1000000);
+	if (err < 0)
+		bt_dev_err(hdev, "Reset timeout");
 
 	btusb_mtk_id_get(data, 0x70010200, &val);
 	if (!val)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v8 2/3 Bluetooth: btmtk: introduce btmtk reset work

From: Jing Cai <[email protected]>

Introduce btmtk_reset_work which can be called whenever the firmware abort, HCI command timeout, other fatal error happen.

---
v2, v3, v4: rebase onto the latest codebase
v5: reset the device on hdev basis and use hci_cmd_sync_queue to
schedule reset work
v6 and v7: rebase onto the latest codebase
v8: drop _work suffix

---
 drivers/bluetooth/btmtk.c |  15 ++++
 drivers/bluetooth/btmtk.h |   8 +++
 drivers/bluetooth/btusb.c | 145 +++++++++++++++++++-------------------
 3 files changed, 97 insertions(+), 71 deletions(-)
drivers/bluetooth/btmtk.c +15 -0
index 8490d59502a5..c83ea3fd524f 100644
@@ -285,6 +285,21 @@ int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 }
 EXPORT_SYMBOL_GPL(btmtk_set_bdaddr);
 
+void btmtk_reset_sync(struct hci_dev *hdev)
+{
+	struct btmediatek_data *reset_work = hci_get_priv(hdev);
+	int err;
+
+	hci_dev_lock(hdev);
+
+	err = hci_cmd_sync_queue(hdev, reset_work->reset_sync, NULL, NULL);
+	if (err)
+		bt_dev_err(hdev, "failed to reset (%d)", err);
+
+	hci_dev_unlock(hdev);
+}
+EXPORT_SYMBOL_GPL(btmtk_reset_sync);
+
 MODULE_AUTHOR("Sean Wang <[email protected]>");
 MODULE_AUTHOR("Mark Chen <[email protected]>");
 MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION);
drivers/bluetooth/btmtk.h +8 -0
index fadc1a520652..75d8e71efcd3 100644
@@ -120,8 +120,11 @@ struct btmtk_hci_wmt_params {
 	u32 *status;
 };
 
+typedef int (*btmtk_reset_sync_func_t)(struct hci_dev *, void *);
+
 struct btmediatek_data {
 	u32 dev_id;
+	btmtk_reset_sync_func_t reset_sync;
 };
 
 typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
@@ -136,6 +139,8 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 
 int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
 			 wmt_cmd_sync_func_t wmt_cmd_sync);
+
+void btmtk_reset_sync(struct hci_dev *hdev);
 #else
 
 static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
@@ -156,4 +161,7 @@ static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
 	return -EOPNOTSUPP;
 }
 
+static void btmtk_reset_sync(struct hci_dev *hdev)
+{
+}
 #endif
drivers/bluetooth/btusb.c +74 -71

169 lines not on this page · raw message

Signature · 1 line
2.25.1
#2 lore raw

PATCH v8 3/3 Bluetooth: btusb: mediatek: add MediaTek devcoredump support

In reply to [email protected]

From: Jing Cai <[email protected]>

This patch implement function .coredump() and dmp_hdr() in btusb driver for MediaTek controller. FW core dump was triggered by FW specific event to show something unexpected happened in the controller.

The driver would be responsible for collecting and uploading the device core dump pieces in hci driver using core dump API. Once we finished the whole process, the driver would reset the controller to recover the kind of fatal error.

---
v2, v3: rebase onto the latest codebase
v4: update the newest API usage for the coredump which was already
into the upstream
v5: support devcoredump on hdev basis
v6: reuse the coredump state HCI_DEVCOREDUMP_* in driver
and drop the driver name copying
v7: rebase onto the latest codebase and refine the check if
we are reaching the end of the coredump
v8: rebase onto the latest tree

---
 drivers/bluetooth/btmtk.c | 112 ++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btmtk.h |  28 ++++++++++
 drivers/bluetooth/btusb.c |  14 +++++
 3 files changed, 154 insertions(+)
drivers/bluetooth/btmtk.c +112 -0
index c83ea3fd524f..786f775196ae 100644
@@ -53,6 +53,56 @@ struct btmtk_section_map {
 	};
 } __packed;
 
+static void btmtk_coredump(struct hci_dev *hdev)
+{
+	int err;
+
+	err = __hci_cmd_send(hdev, 0xfd5b, 0, NULL);
+	if (err < 0)
+		bt_dev_err(hdev, "Coredump failed (%d)", err);
+}
+
+static void btmtk_coredump_hdr(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmediatek_data *data = hci_get_priv(hdev);
+	char buf[80];
+
+	snprintf(buf, sizeof(buf), "Controller Name: 0x%X\n",
+		 data->dev_id);
+	skb_put_data(skb, buf, strlen(buf));
+
+	snprintf(buf, sizeof(buf), "Firmware Version: 0x%X\n",
+		 data->cd_info.fw_version);
+	skb_put_data(skb, buf, strlen(buf));
+
+	snprintf(buf, sizeof(buf), "Driver: %s\n",
+		 data->cd_info.driver_name);
+	skb_put_data(skb, buf, strlen(buf));
+
+	snprintf(buf, sizeof(buf), "Vendor: MediaTek\n");
+	skb_put_data(skb, buf, strlen(buf));
+}
+
+static void btmtk_coredump_notify(struct hci_dev *hdev, int state)
+{
+	struct btmediatek_data *data = hci_get_priv(hdev);
+
+	switch (state) {
+	case HCI_DEVCOREDUMP_IDLE:
+		data->cd_info.state = HCI_DEVCOREDUMP_IDLE;
+		break;
+	case HCI_DEVCOREDUMP_ACTIVE:
+		data->cd_info.state = HCI_DEVCOREDUMP_ACTIVE;
+		break;
+	case HCI_DEVCOREDUMP_TIMEOUT:
+	case HCI_DEVCOREDUMP_ABORT:
+	case HCI_DEVCOREDUMP_DONE:
+		data->cd_info.state = HCI_DEVCOREDUMP_IDLE;
+		btmtk_reset_sync(hdev);
+		break;
+	}
+}
+
 int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 			      wmt_cmd_sync_func_t wmt_cmd_sync)
 {
@@ -300,6 +350,68 @@ void btmtk_reset_sync(struct hci_dev *hdev)
 }
 EXPORT_SYMBOL_GPL(btmtk_reset_sync);
 
+int btmtk_register_coredump(struct hci_dev *hdev, const char *name,
+			    u32 fw_version)
+{
+	struct btmediatek_data *data = hci_get_priv(hdev);
+
+	if (!IS_ENABLED(CONFIG_DEV_COREDUMP))
+		return -EOPNOTSUPP;
+
+	data->cd_info.fw_version = fw_version;
+	data->cd_info.state = HCI_DEVCOREDUMP_IDLE;
+	data->cd_info.driver_name = name;
+
+	return hci_devcd_register(hdev, btmtk_coredump, btmtk_coredump_hdr,
+				  btmtk_coredump_notify);
+}
+EXPORT_SYMBOL_GPL(btmtk_register_coredump);
+
+int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmediatek_data *data = hci_get_priv(hdev);
+	int err;
+
+	if (!IS_ENABLED(CONFIG_DEV_COREDUMP))
+		return 0;
+
+	switch (data->cd_info.state) {
+	case HCI_DEVCOREDUMP_IDLE:
+		err = hci_devcd_init(hdev, MTK_COREDUMP_SIZE);
+		if (err < 0)
+			break;
+		data->cd_info.cnt = 0;
+
+		/* It is supposed coredump can be done within 5 seconds */
+		schedule_delayed_work(&hdev->dump.dump_timeout,
+				      msecs_to_jiffies(5000));
+		fallthrough;
+	case HCI_DEVCOREDUMP_ACTIVE:
+	default:
+		err = hci_devcd_append(hdev, skb);
+		if (err < 0)
+			break;
+		data->cd_info.cnt++;
+
+		/* Mediatek coredump data would be more than MTK_COREDUMP_NUM */
+		if (data->cd_info.cnt > MTK_COREDUMP_NUM &&
+		    skb->len > sizeof(MTK_COREDUMP_END) &&
+		    !memcmp((char *)&skb->data[skb->len - sizeof(MTK_COREDUMP_END)],
+			    MTK_COREDUMP_END, sizeof(MTK_COREDUMP_END) - 1)) {
+			bt_dev_info(hdev, "Mediatek coredump end");
+			hci_devcd_complete(hdev);
+		}
+
+		break;
+	}
+
+	if (err < 0)
+		kfree_skb(skb);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(btmtk_process_coredump);
+
 MODULE_AUTHOR("Sean Wang <[email protected]>");
 MODULE_AUTHOR("Mark Chen <[email protected]>");
 MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION);
drivers/bluetooth/btmtk.h +28 -0
index 75d8e71efcd3..68309dfe076a 100644
@@ -22,6 +22,10 @@
 #define MT7921_DLSTATUS 0x7c053c10
 #define BT_DL_STATE BIT(1)
 
+#define MTK_COREDUMP_SIZE		(1024 * 1000)
+#define MTK_COREDUMP_END		"coredump end"
+#define MTK_COREDUMP_NUM		255
+
 enum {
 	BTMTK_WMT_PATCH_DWNLD = 0x1,
 	BTMTK_WMT_TEST = 0x2,
@@ -122,9 +126,17 @@ struct btmtk_hci_wmt_params {
 
 typedef int (*btmtk_reset_sync_func_t)(struct hci_dev *, void *);
 
+struct btmtk_coredump_info {
+	const char *driver_name;
+	u32 fw_version;
+	u16 cnt;
+	int state;
+};
+
 struct btmediatek_data {
 	u32 dev_id;
 	btmtk_reset_sync_func_t reset_sync;
+	struct btmtk_coredump_info cd_info;
 };
 
 typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
@@ -141,6 +153,11 @@ int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
 			 wmt_cmd_sync_func_t wmt_cmd_sync);
 
 void btmtk_reset_sync(struct hci_dev *hdev);
+
+int btmtk_register_coredump(struct hci_dev *hdev, const char *name,
+			    u32 fw_version);
+
+int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb);
 #else
 
 static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
@@ -164,4 +181,15 @@ static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
 static void btmtk_reset_sync(struct hci_dev *hdev)
 {
 }
+
+static int btmtk_register_coredump(struct hci_dev *hdev, const char *name,
+				   u32 fw_version)
+{
+	return -EOPNOTSUPP;
+}
+
+static int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	return -EOPNOTSUPP;
+}
 #endif
drivers/bluetooth/btusb.c +14 -0
index 983380c4e609..bd27eddc1820 100644
@@ -3153,6 +3153,10 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	mediatek->dev_id = dev_id;
 	mediatek->reset_sync = btusb_mtk_reset;
 
+	err = btmtk_register_coredump(hdev, btusb_driver.name, fw_version);
+	if (err < 0)
+		bt_dev_err(hdev, "Failed to register coredump (%d)", err);
+
 	switch (dev_id) {
 	case 0x7663:
 		fwname = FIRMWARE_MT7663;
@@ -3313,6 +3317,7 @@ static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle);
+	struct sk_buff *skb_cd;
 
 	switch (handle) {
 	case 0xfc6f:		/* Firmware dump from device */
@@ -3320,6 +3325,15 @@ static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
 		 * suspend and thus disable auto-suspend.
 		 */
 		usb_disable_autosuspend(data->udev);
+
+		/* We need to forward the diagnostic packet to userspace daemon
+		 * for backward compatibility, so we have to clone the packet
+		 * extraly for the in-kernel coredump support.
+		 */
+		skb_cd = skb_clone(skb, GFP_ATOMIC);
+		if (skb_cd)
+			btmtk_process_coredump(hdev, skb_cd);
+
 		fallthrough;
 	case 0x05ff:		/* Firmware debug logging 1 */
 	case 0x05fe:		/* Firmware debug logging 2 */
Signature · 1 line
2.25.1
#3 lore raw
In reply to [email protected]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=761063

---Test result---

Test Summary:

CheckPatch                    PASS      3.64 seconds
GitLint                       PASS      1.09 seconds
SubjectPrefix                 PASS      0.39 seconds
BuildKernel                   PASS      40.35 seconds
CheckAllWarning               PASS      45.14 seconds
CheckSparse                   PASS      48.92 seconds
CheckSmatch                   PASS      131.41 seconds
BuildKernel32                 PASS      37.59 seconds
TestRunnerSetup               PASS      550.92 seconds
TestRunner_l2cap-tester       PASS      19.57 seconds
TestRunner_iso-tester         PASS      29.10 seconds
TestRunner_bnep-tester        PASS      6.53 seconds
TestRunner_mgmt-tester        PASS      148.01 seconds
TestRunner_rfcomm-tester      PASS      10.65 seconds
TestRunner_sco-tester         PASS      9.74 seconds
TestRunner_ioctl-tester       PASS      11.31 seconds
TestRunner_mesh-tester        PASS      8.35 seconds
TestRunner_smp-tester         PASS      9.46 seconds
TestRunner_userchan-tester    PASS      6.88 seconds
IncrementalBuild              PASS      48.56 seconds

---
Regards,
Linux Bluetooth

#4 lore raw
In reply to [email protected]
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 8 lines · On Thu, 29 Jun 2023 06:54:55 +0800 you wrote:

From: Sean Wang <[email protected]>

Use readx_poll_timeout instead of open coding to poll the hardware reset status until it is done.

[...]

Here is the summary with links:
- [v8,1/3] Bluetooth: btusb: mediatek: readx_poll_timeout replaces open coding

    https://git.kernel.org/bluetooth/bluetooth-next/c/c56e5f834e13
  - [v8,2/3] Bluetooth: btmtk: introduce btmtk reset work
    https://git.kernel.org/bluetooth/bluetooth-next/c/ed2e80b8b6a7
  - [v8,3/3] Bluetooth: btusb: mediatek: add MediaTek devcoredump support
    https://git.kernel.org/bluetooth/bluetooth-next/c/872f8c253cb9

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html