Skip to contentSkip to conversation

octeontx2-af: MAC block fixes for CN10KB

PATCH Applied Hariprasad Kelam 3 participants 9 messages Jun 30, 2023 – Jul 2, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover octeontx2-af: MAC block fixes for CN10KB

This patch set contains fixes for the issues encountered in testing CN10KB MAC block RPM_USX.

Patch1: firmware to kernel communication is not working due to wrong
interrupt configuration. CSR addresses are corrected.

Patch2: NIX to RVU PF mapping errors encountered due to wrong firmware
config. Corrects this mapping error.

Patch3: Driver is trying to access non exist cgx/lmac which is resulting
in kernel panic. Address this issue by adding proper checks.

Patch4: MAC features are not getting reset on FLR. Fix the issue by
resetting the stale config.

Hariprasad Kelam (4):
octeontx2-af: cn10kb: fix interrupt csr addresses
octeontx2-af: Fix mapping for NIX block from CGX connection
octeontx2-af: Add validation before accessing cgx and lmac
octeontx2-af: Reset MAC features in FLR

 .../net/ethernet/marvell/octeontx2/af/cgx.c   | 33 +++++++++++++++++--
 .../net/ethernet/marvell/octeontx2/af/cgx.h   |  2 ++
 .../marvell/octeontx2/af/lmac_common.h        |  3 ++
 .../net/ethernet/marvell/octeontx2/af/rpm.c   | 32 +++++++++++++++---
 .../net/ethernet/marvell/octeontx2/af/rpm.h   |  5 ++-
 .../net/ethernet/marvell/octeontx2/af/rvu.c   |  1 +
 .../net/ethernet/marvell/octeontx2/af/rvu.h   | 12 +++++++
 .../ethernet/marvell/octeontx2/af/rvu_cgx.c   | 20 ++++++++++-
 8 files changed, 99 insertions(+), 9 deletions(-)

--
2.17.1

#1 lore raw

PATCH 1/4 octeontx2-af: cn10kb: fix interrupt csr addresses

The current design is that, for asynchronous events like link_up and link_down firmware raises the interrupt to kernel. The previous patch which added RPM_USX driver has a bug where it uses old csr addresses for configuring interrupts. Which is resulting in losing interrupts from source firmware.

This patch fixes the issue by correcting csr addresses.

Fixes b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
---
 drivers/net/ethernet/marvell/octeontx2/af/rpm.c | 2 +-
 drivers/net/ethernet/marvell/octeontx2/af/rpm.h | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/rpm.c +1 -1
index de0d88dd10d6..a433f92c51ea 100644
@@ -47,7 +47,7 @@ static struct mac_ops		rpm2_mac_ops   = {
 	.int_set_reg    =       RPM2_CMRX_SW_INT_ENA_W1S,
 	.irq_offset     =       1,
 	.int_ena_bit    =       BIT_ULL(0),
-	.lmac_fwi	=	RPM_LMAC_FWI,
+	.lmac_fwi	=	RPM2_LMAC_FWI,
 	.non_contiguous_serdes_lane = true,
 	.rx_stats_cnt   =       43,
 	.tx_stats_cnt   =       34,
drivers/net/ethernet/marvell/octeontx2/af/rpm.h +2 -1
index 22147b4c2137..be294eebab26 100644
@@ -94,7 +94,8 @@
 
 /* CN10KB CSR Declaration */
 #define  RPM2_CMRX_SW_INT				0x1b0
-#define  RPM2_CMRX_SW_INT_ENA_W1S			0x1b8
+#define  RPM2_CMRX_SW_INT_ENA_W1S			0x1c8
+#define  RPM2_LMAC_FWI					0x12
 #define  RPM2_CMR_CHAN_MSK_OR				0x3120
 #define  RPM2_CMR_RX_OVR_BP_EN				BIT_ULL(2)
 #define  RPM2_CMR_RX_OVR_BP_BP				BIT_ULL(1)
Signature · 1 line
2.17.1
Reviewed-by on v1 1/4
#2 lore raw

Re: [net Patch 1/4] octeontx2-af: cn10kb: fix interrupt csr addresses

Quoted 11 lines · Hariprasad Kelam

The current design is that, for asynchronous events like link_up and link_down firmware raises the interrupt to kernel. The previous patch which added RPM_USX driver has a bug where it uses old csr addresses for configuring interrupts. Which is resulting in losing interrupts from source firmware.

This patch fixes the issue by correcting csr addresses.

Fixes b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
#3 lore raw

PATCH 2/4 octeontx2-af: Fix mapping for NIX block from CGX connection

In reply to Hariprasad Kelam

Firmware configures NIX block mapping for all MAC blocks. The current implementation reads the configuration and creates the mapping between RVU PF and NIX blocks. But this configuration is only valid for silicons that support multiple blocks. For all other silicons, all MAC blocks map to NIX0.

This patch corrects the mapping by adding a check for the same.

Fixes c5a73b632b90 ("octeontx2-af: Map NIX block from CGX connection")
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h     | 11 +++++++++++
 drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)
drivers/net/ethernet/marvell/octeontx2/af/rvu.h +11 -0
index b5a7ee63508c..d4b8d4546de2 100644
@@ -23,6 +23,7 @@
 #define	PCI_DEVID_OCTEONTX2_LBK			0xA061
 
 /* Subsystem Device ID */
+#define PCI_SUBSYS_DEVID_98XX                  0xB100
 #define PCI_SUBSYS_DEVID_96XX                  0xB200
 #define PCI_SUBSYS_DEVID_CN10K_A	       0xB900
 #define PCI_SUBSYS_DEVID_CNF10K_B              0xBC00
@@ -686,6 +687,16 @@ static inline u16 rvu_nix_chan_cpt(struct rvu *rvu, u8 chan)
 	return rvu->hw->cpt_chan_base + chan;
 }
 
+static inline bool is_rvu_supports_nix1(struct rvu *rvu)
+{
+	struct pci_dev *pdev = rvu->pdev;
+
+	if (pdev->subsystem_device == PCI_SUBSYS_DEVID_98XX)
+		return true;
+
+	return false;
+}
+
 /* Function Prototypes
  * RVU
  */
drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +1 -1
index 83b342fa8d75..48611e603228 100644
@@ -114,7 +114,7 @@ static void rvu_map_cgx_nix_block(struct rvu *rvu, int pf,
 	p2x = cgx_lmac_get_p2x(cgx_id, lmac_id);
 	/* Firmware sets P2X_SELECT as either NIX0 or NIX1 */
 	pfvf->nix_blkaddr = BLKADDR_NIX0;
-	if (p2x == CMR_P2X_SEL_NIX1)
+	if (is_rvu_supports_nix1(rvu) && p2x == CMR_P2X_SEL_NIX1)
 		pfvf->nix_blkaddr = BLKADDR_NIX1;
 }
 
Signature · 1 line
2.17.1
Reviewed-by on v1 2/4
#4 lore raw

Re: [net Patch 2/4] octeontx2-af: Fix mapping for NIX block from CGX connection

Quoted 7 lines · Hariprasad Kelam

Firmware configures NIX block mapping for all MAC blocks. The current implementation reads the configuration and creates the mapping between RVU PF and NIX blocks. But this configuration is only valid for silicons that support multiple blocks. For all other silicons, all MAC blocks map to NIX0.

Quoted 5 lines

This patch corrects the mapping by adding a check for the same.

Fixes c5a73b632b90 ("octeontx2-af: Map NIX block from CGX connection")
#5 lore raw

PATCH 3/4 octeontx2-af: Add validation before accessing cgx and lmac

In reply to Hariprasad Kelam

with the addition of new MAC blocks like CN10K RPM and CN10KB RPM_USX, LMACs are noncontiguous and CGX blocks are also noncontiguous. But during RVU driver initialization, the driver is assuming they are contiguous and trying to access cgx or lmac with their id which is resulting in kernel panic.

This patch fixes the issue by adding proper checks.

[   23.219150] pc : cgx_lmac_read+0x38/0x70
[   23.219154] lr : rvu_program_channels+0x3f0/0x498
[   23.223852] sp : ffff000100d6fc80
[   23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[   23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:

fffffffffff0f000

Fixes 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support")
---
 drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/net/ethernet/marvell/octeontx2/af/cgx.c +7 -0
index bd77152bb8d7..f4bdca662d61 100644
@@ -169,6 +169,9 @@ void cgx_lmac_write(int cgx_id, int lmac_id, u64 offset, u64 val)
 {
 	struct cgx *cgx_dev = cgx_get_pdata(cgx_id);
 
+	/* Software must not access disabled LMAC registers */
+	if (!is_lmac_valid(cgx_dev, lmac_id))
+		return;
 	cgx_write(cgx_dev, lmac_id, offset, val);
 }
 
@@ -176,6 +179,10 @@ u64 cgx_lmac_read(int cgx_id, int lmac_id, u64 offset)
 {
 	struct cgx *cgx_dev = cgx_get_pdata(cgx_id);
 
+	/* Software must not access disabled LMAC registers */
+	if (!is_lmac_valid(cgx_dev, lmac_id))
+		return 0;
+
 	return cgx_read(cgx_dev, lmac_id, offset);
 }
 
Signature · 1 line
2.17.1
Reviewed-by on v1 3/4
#6 lore raw

Re: [net Patch 3/4] octeontx2-af: Add validation before accessing cgx and lmac

Quoted 14 lines · Hariprasad Kelam

with the addition of new MAC blocks like CN10K RPM and CN10KB RPM_USX, LMACs are noncontiguous and CGX blocks are also noncontiguous. But during RVU driver initialization, the driver is assuming they are contiguous and trying to access cgx or lmac with their id which is resulting in kernel panic.

This patch fixes the issue by adding proper checks.

[   23.219150] pc : cgx_lmac_read+0x38/0x70
[   23.219154] lr : rvu_program_channels+0x3f0/0x498
[   23.223852] sp : ffff000100d6fc80
[   23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[   23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
Quoted 5 lines

fffffffffff0f000

Fixes 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support")
#7 lore raw

PATCH 4/4 octeontx2-af: Reset MAC features in FLR

In reply to Hariprasad Kelam

AF driver configures MAC features like internal loopback and PFC upon receiving the request from PF and its VF netdev. But these features are not getting reset in FLR. This patch fixes the issue by resetting the same.

Fixes 23999b30ae67 ("octeontx2-af: Enable or disable CGX internal loopback")
Fixes 1121f6b02e7a ("octeontx2-af: Priority flow control configuration support")
---
 .../net/ethernet/marvell/octeontx2/af/cgx.c   | 26 ++++++++++++++--
 .../net/ethernet/marvell/octeontx2/af/cgx.h   |  2 ++
 .../marvell/octeontx2/af/lmac_common.h        |  3 ++
 .../net/ethernet/marvell/octeontx2/af/rpm.c   | 30 +++++++++++++++++--
 .../net/ethernet/marvell/octeontx2/af/rpm.h   |  2 ++
 .../net/ethernet/marvell/octeontx2/af/rvu.c   |  1 +
 .../net/ethernet/marvell/octeontx2/af/rvu.h   |  1 +
 .../ethernet/marvell/octeontx2/af/rvu_cgx.c   | 18 +++++++++++
 8 files changed, 77 insertions(+), 6 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/cgx.c +23 -3
index f4bdca662d61..592037f4e55b 100644
@@ -537,14 +537,15 @@ static u32 cgx_get_lmac_fifo_len(void *cgxd, int lmac_id)
 int cgx_lmac_internal_loopback(void *cgxd, int lmac_id, bool enable)
 {
 	struct cgx *cgx = cgxd;
-	u8 lmac_type;
+	struct lmac *lmac;
 	u64 cfg;
 
 	if (!is_lmac_valid(cgx, lmac_id))
 		return -ENODEV;
 
-	lmac_type = cgx->mac_ops->get_lmac_type(cgx, lmac_id);
-	if (lmac_type == LMAC_MODE_SGMII || lmac_type == LMAC_MODE_QSGMII) {
+	lmac = lmac_pdata(lmac_id, cgx);
+	if (lmac->lmac_type == LMAC_MODE_SGMII ||
+	    lmac->lmac_type == LMAC_MODE_QSGMII) {
 		cfg = cgx_read(cgx, lmac_id, CGXX_GMP_PCS_MRX_CTL);
 		if (enable)
 			cfg |= CGXX_GMP_PCS_MRX_CTL_LBK;
@@ -1563,6 +1564,23 @@ int cgx_lmac_linkup_start(void *cgxd)
 	return 0;
 }
 
+int cgx_lmac_reset(void *cgxd, int lmac_id, u8 pf_req_flr)
+{
+	struct cgx *cgx = cgxd;
+	u64 cfg;
+
+	if (!is_lmac_valid(cgx, lmac_id))
+		return -ENODEV;
+
+	/* Resetting PFC related CSRs */
+	cfg = 0xff;
+	cgx_write(cgxd, lmac_id, CGXX_CMRX_RX_LOGL_XON, cfg);
+
+	if (pf_req_flr)
+		cgx_lmac_internal_loopback(cgxd, lmac_id, false);
+	return 0;
+}
+
 static int cgx_configure_interrupt(struct cgx *cgx, struct lmac *lmac,
 				   int cnt, bool req_free)
 {
@@ -1682,6 +1700,7 @@ static int cgx_lmac_init(struct cgx *cgx)
 		cgx->lmac_idmap[lmac->lmac_id] = lmac;
 		set_bit(lmac->lmac_id, &cgx->lmac_bmap);
 		cgx->mac_ops->mac_pause_frm_config(cgx, lmac->lmac_id, true);
+		lmac->lmac_type = cgx->mac_ops->get_lmac_type(cgx, lmac->lmac_id);
 	}
 
 	return cgx_lmac_verify_fwi_version(cgx);
@@ -1778,6 +1797,7 @@ static struct mac_ops	cgx_mac_ops    = {
 	.mac_tx_enable =		cgx_lmac_tx_enable,
 	.pfc_config =                   cgx_lmac_pfc_config,
 	.mac_get_pfc_frm_cfg   =        cgx_lmac_get_pfc_frm_cfg,
+	.mac_reset   =			cgx_lmac_reset,
 };
 
 static int cgx_probe(struct pci_dev *pdev, const struct pci_device_id *id)
drivers/net/ethernet/marvell/octeontx2/af/cgx.h +2 -0
index 5a20d93004c7..574114179688 100644
@@ -35,6 +35,7 @@
 #define CGXX_CMRX_INT_ENA_W1S		0x058
 #define CGXX_CMRX_RX_ID_MAP		0x060
 #define CGXX_CMRX_RX_STAT0		0x070
+#define CGXX_CMRX_RX_LOGL_XON		0x100
 #define CGXX_CMRX_RX_LMACS		0x128
 #define CGXX_CMRX_RX_DMAC_CTL0		(0x1F8 + mac_ops->csr_offset)
 #define CGX_DMAC_CTL0_CAM_ENABLE	BIT_ULL(3)
@@ -181,4 +182,5 @@ int cgx_lmac_get_pfc_frm_cfg(void *cgxd, int lmac_id, u8 *tx_pause,
 			     u8 *rx_pause);
 int verify_lmac_fc_cfg(void *cgxd, int lmac_id, u8 tx_pause, u8 rx_pause,
 		       int pfvf_idx);
+int cgx_lmac_reset(void *cgxd, int lmac_id, u8 pf_req_flr);
 #endif /* CGX_H */
drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h +3 -0
index 39aaf0e4467d..0b4cba03f2e8 100644
@@ -24,6 +24,7 @@
  * @cgx:		parent cgx port
  * @mcast_filters_count:  Number of multicast filters installed
  * @lmac_id:		lmac port id
+ * @lmac_type:	        lmac type like SGMII/XAUI
  * @cmd_pend:		flag set before new command is started
  *			flag cleared after command response is received
  * @name:		lmac port name
@@ -43,6 +44,7 @@ struct lmac {
 	struct cgx *cgx;
 	u8 mcast_filters_count;
 	u8 lmac_id;
+	u8 lmac_type;
 	bool cmd_pend;
 	char *name;
 };
@@ -125,6 +127,7 @@ struct mac_ops {
 
 	int                     (*mac_get_pfc_frm_cfg)(void *cgxd, int lmac_id,
 						       u8 *tx_pause, u8 *rx_pause);
+	int			(*mac_reset)(void *cgxd, int lmac_id, u8 pf_req_flr);
 
 	/* FEC stats */
 	int			(*get_fec_stats)(void *cgxd, int lmac_id,
drivers/net/ethernet/marvell/octeontx2/af/rpm.c +27 -3
index a433f92c51ea..b4fcb20c3f4f 100644
@@ -37,6 +37,7 @@ static struct mac_ops		rpm_mac_ops   = {
 	.mac_tx_enable =		rpm_lmac_tx_enable,
 	.pfc_config =                   rpm_lmac_pfc_config,
 	.mac_get_pfc_frm_cfg   =        rpm_lmac_get_pfc_frm_cfg,
+	.mac_reset   =			rpm_lmac_reset,
 };
 
 static struct mac_ops		rpm2_mac_ops   = {
@@ -68,6 +69,7 @@ static struct mac_ops		rpm2_mac_ops   = {
 	.mac_tx_enable =		rpm_lmac_tx_enable,
 	.pfc_config =                   rpm_lmac_pfc_config,
 	.mac_get_pfc_frm_cfg   =        rpm_lmac_get_pfc_frm_cfg,
+	.mac_reset   =			rpm_lmac_reset,
 };
 
 bool is_dev_rpm2(void *rpmd)
@@ -537,14 +539,15 @@ u32 rpm2_get_lmac_fifo_len(void *rpmd, int lmac_id)
 int rpm_lmac_internal_loopback(void *rpmd, int lmac_id, bool enable)
 {
 	rpm_t *rpm = rpmd;
-	u8 lmac_type;
+	struct lmac *lmac;
 	u64 cfg;
 
 	if (!is_lmac_valid(rpm, lmac_id))
 		return -ENODEV;
-	lmac_type = rpm->mac_ops->get_lmac_type(rpm, lmac_id);
 
-	if (lmac_type == LMAC_MODE_QSGMII || lmac_type == LMAC_MODE_SGMII) {
+	lmac = lmac_pdata(lmac_id, rpm);
+	if (lmac->lmac_type == LMAC_MODE_QSGMII ||
+	    lmac->lmac_type == LMAC_MODE_SGMII) {
 		dev_err(&rpm->pdev->dev, "loopback not supported for LPC mode\n");
 		return 0;
 	}
@@ -713,3 +716,24 @@ int rpm_get_fec_stats(void *rpmd, int lmac_id, struct cgx_fec_stats_rsp *rsp)
 
 	return 0;
 }
+
+int rpm_lmac_reset(void *rpmd, int lmac_id, u8 pf_req_flr)
+{
+	u64 rx_logl_xon, cfg;
+	rpm_t *rpm = rpmd;
+
+	if (!is_lmac_valid(rpm, lmac_id))
+		return -ENODEV;
+
+	/* Resetting PFC related CSRs */
+	rx_logl_xon = is_dev_rpm2(rpm) ? RPM2_CMRX_RX_LOGL_XON :
+					 RPMX_CMRX_RX_LOGL_XON;
+	cfg = 0xff;
+
+	rpm_write(rpm, lmac_id, rx_logl_xon, cfg);
+
+	if (pf_req_flr)
+		rpm_lmac_internal_loopback(rpm, lmac_id, false);
+
+	return 0;
+}
drivers/net/ethernet/marvell/octeontx2/af/rpm.h +2 -0
index be294eebab26..b79cfbc6f877 100644
@@ -74,6 +74,7 @@
 #define RPMX_MTI_MAC100X_CL01_PAUSE_QUANTA              0x80A8
 #define RPMX_MTI_MAC100X_CL89_PAUSE_QUANTA		0x8108
 #define RPM_DEFAULT_PAUSE_TIME                          0x7FF
+#define RPMX_CMRX_RX_LOGL_XON				0x4100
 
 #define RPMX_MTI_MAC100X_XIF_MODE		        0x8100
 #define RPMX_ONESTEP_ENABLE				BIT_ULL(5)
@@ -132,4 +133,5 @@ int rpm_lmac_get_pfc_frm_cfg(void *rpmd, int lmac_id, u8 *tx_pause,
 int rpm2_get_nr_lmacs(void *rpmd);
 bool is_dev_rpm2(void *rpmd);
 int rpm_get_fec_stats(void *cgxd, int lmac_id, struct cgx_fec_stats_rsp *rsp);
+int rpm_lmac_reset(void *rpmd, int lmac_id, u8 pf_req_flr);
 #endif /* RPM_H */
drivers/net/ethernet/marvell/octeontx2/af/rvu.c +1 -0
index 0069e60afa3b..8dbc35c481f6 100644
@@ -2629,6 +2629,7 @@ static void __rvu_flr_handler(struct rvu *rvu, u16 pcifunc)
 	 * Since LF is detached use LF number as -1.
 	 */
 	rvu_npc_free_mcam_entries(rvu, pcifunc, -1);
+	rvu_mac_reset(rvu, pcifunc);
 
 	mutex_unlock(&rvu->flr_lock);
 }
drivers/net/ethernet/marvell/octeontx2/af/rvu.h +1 -0
index d4b8d4546de2..e8e65fd7888d 100644
@@ -895,6 +895,7 @@ int rvu_cgx_config_tx(void *cgxd, int lmac_id, bool enable);
 int rvu_cgx_prio_flow_ctrl_cfg(struct rvu *rvu, u16 pcifunc, u8 tx_pause, u8 rx_pause,
 			       u16 pfc_en);
 int rvu_cgx_cfg_pause_frm(struct rvu *rvu, u16 pcifunc, u8 tx_pause, u8 rx_pause);
+void rvu_mac_reset(struct rvu *rvu, u16 pcifunc);
 u32 rvu_cgx_get_lmac_fifolen(struct rvu *rvu, int cgx, int lmac);
 int npc_get_nixlf_mcam_index(struct npc_mcam *mcam, u16 pcifunc, int nixlf,
 			     int type);
drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +18 -0
index 48611e603228..4b8559ac0404 100644
@@ -1250,3 +1250,21 @@ int rvu_mbox_handler_cgx_prio_flow_ctrl_cfg(struct rvu *rvu,
 	mac_ops->mac_get_pfc_frm_cfg(cgxd, lmac_id, &rsp->tx_pause, &rsp->rx_pause);
 	return err;
 }
+
+void rvu_mac_reset(struct rvu *rvu, u16 pcifunc)
+{
+	int pf = rvu_get_pf(pcifunc);
+	struct mac_ops *mac_ops;
+	struct cgx *cgxd;
+	u8 cgx, lmac;
+
+	if (!is_pf_cgxmapped(rvu, pf))
+		return;
+
+	rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx, &lmac);
+	cgxd = rvu_cgx_pdata(cgx, rvu);
+	mac_ops = get_mac_ops(cgxd);
+
+	if (mac_ops->mac_reset(cgxd, lmac, !is_vf(pcifunc)))
+		dev_err(rvu->dev, "Failed to reset MAC\n");
+}
Signature · 1 line
2.17.1
#8 lore raw
In reply to Hariprasad Kelam
This series was applied to netdev/net.git (main) by David S. Miller <[email protected]>:

Hello:

This series was applied to netdev/net.git (main)
by David S. Miller <[email protected]>:

Quoted 10 lines · On Fri, 30 Jun 2023 11:58:41 +0530 you wrote:

This patch set contains fixes for the issues encountered in testing CN10KB MAC block RPM_USX.

Patch1: firmware to kernel communication is not working due to wrong
interrupt configuration. CSR addresses are corrected.

Patch2: NIX to RVU PF mapping errors encountered due to wrong firmware
config. Corrects this mapping error.

[...]

Here is the summary with links:
- [net,1/4] octeontx2-af: cn10kb: fix interrupt csr addresses

    https://git.kernel.org/netdev/net/c/4c5a331cacda
  - [net,2/4] octeontx2-af: Fix mapping for NIX block from CGX connection
    https://git.kernel.org/netdev/net/c/2e7bc57b976b
  - [net,3/4] octeontx2-af: Add validation before accessing cgx and lmac
    https://git.kernel.org/netdev/net/c/79ebb53772c9
  - [net,4/4] octeontx2-af: Reset MAC features in FLR
    https://git.kernel.org/netdev/net/c/2e3e94c2f5dc

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html