Intel Wired LAN Driver Updates 2023-07-05 (ice)
Subsystems (3)
Tony Nguyen
maintainerThis series contains updates to ice driver only.
Sridhar fixes incorrect comparison of max Tx rate limit to occur against each TC value rather than the aggregate. He also resolves an issue with the wrong VSI being used when setting max Tx rate when TCs are enabled.
The following are changes since commit c451410ca7e3d8eeb31d141fc20c200e21754ba4:
Merge branch 'mptcp-fixes'
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 100GbE
Sridhar Samudrala (2):
ice: Fix max_rate check while configuring TX rate limits
ice: Fix tx queue rate limit when TCs are configured
drivers/net/ethernet/intel/ice/ice_main.c | 23 ++++++++++++++------- drivers/net/ethernet/intel/ice/ice_tc_lib.c | 22 ++++++++++---------- drivers/net/ethernet/intel/ice/ice_tc_lib.h | 1 + 3 files changed, 27 insertions(+), 19 deletions(-)
Signature · 1 line
2.38.1
Tony Nguyen
maintainerPATCH 1/2 ice: Fix max_rate check while configuring TX rate limits
From: Sridhar Samudrala <[email protected]>
Remove incorrect check in ice_validate_mqprio_opt() that limits filter configuration when sum of max_rates of all TCs exceeds the link speed. The max rate of each TC is unrelated to value used by other TCs and is valid as long as it is less than link speed.
--- drivers/net/ethernet/intel/ice/ice_main.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/net/ethernet/intel/ice/ice_main.c +8 -8
@@ -7872,10 +7872,10 @@ static int ice_validate_mqprio_qopt(struct ice_vsi *vsi, struct tc_mqprio_qopt_offload *mqprio_qopt) { - u64 sum_max_rate = 0, sum_min_rate = 0; int non_power_of_2_qcount = 0;struct ice_pf *pf = vsi->back;int max_rss_q_cnt =0 ; +u64 sum_min_rate =0 ;struct device *dev;int i, speed;u8 num_tc;
@@ -7891,6 +7891,7 @@ ice_validate_mqprio_qopt(struct ice_vsi *vsi, dev =ice_pf_to_dev (pf); vsi->ch_rss_size =0 ; num_tc = mqprio_qopt->qopt.num_tc; + speed =ice_get_link_speed_kbps (vsi);for (i =0 ; num_tc; i++) {int qcount = mqprio_qopt->qopt.count[i];
@@ -7931,7 +7932,6 @@ ice_validate_mqprio_qopt(struct ice_vsi *vsi,*/ max_rate = mqprio_qopt->max_rate[i]; max_rate =div_u64 (max_rate,ICE_BW_KBPS_DIVISOR ); - sum_max_rate += max_rate;/* min_rate is minimum guaranteed rate and it can't be zero */ min_rate = mqprio_qopt->min_rate[i];
@@ -7944,6 +7944,12 @@ ice_validate_mqprio_qopt(struct ice_vsi *vsi,return -EINVAL ; } +if (max_rate && max_rate > speed) { +dev_err (dev,"TC%d: max_rate(%llu Kbps) > link speed of %u Kbps\n" , + i, max_rate, speed); +return -EINVAL ; + } +iter_div_u64_rem (min_rate,ICE_MIN_BW_LIMIT , &rem);if (rem) { dev_err(dev, "TC%d: Min Rate not multiple of %u Kbps",
@@ -7981,12 +7987,6 @@ ice_validate_mqprio_qopt(struct ice_vsi *vsi, (mqprio_qopt->qopt.offset[i] + mqprio_qopt->qopt.count[i]))return -EINVAL ; - speed =ice_get_link_speed_kbps (vsi); -if (sum_max_rate && sum_max_rate > (u64 )speed) { -dev_err (dev,"Invalid max Tx rate(%llu) Kbps > speed(%u) Kbps specified\n" , - sum_max_rate, speed); -return -EINVAL ; - }if (sum_min_rate && sum_min_rate > (u64 )speed) {dev_err (dev,"Invalid min Tx rate(%llu) Kbps > speed (%u) Kbps specified\n" , sum_min_rate, speed);
Signature · 1 line
2.38.1
Re: [PATCH net 1/2] ice: Fix max_rate check while configuring TX rate limits
Quoted 8 lines · Tony Nguyen
From: Sridhar Samudrala <[email protected]>
Remove incorrect check in
ice_validate_mqprio_opt()that limits filter configuration when sum ofmax_ratesof all TCs exceeds the link speed. The max rate of each TC is unrelated to value used by other TCs and is valid as long as it is less than link speed.
Quoted 9 lines
Fixes fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")Signed-off-by Sridhar Samudrala <[email protected]>Signed-off-by Sudheer Mogilappagari <[email protected]>Tested-by Bharathi Sreenivas <[email protected]>Signed-off-by Tony Nguyen <[email protected]>--- drivers/net/ethernet/intel/ice/ice_main.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
Thanks,
Tony Nguyen
maintainerPATCH 2/2 ice: Fix tx queue rate limit when TCs are configured
In reply to Tony NguyenFrom: Sridhar Samudrala <[email protected]>
Configuring tx_maxrate via sysfs interface /sys/class/net/eth0/queues/tx-1/tx_maxrate was not working when TCs are configured because always main VSI was being used. Fix by using correct VSI in ice_set_tx_maxrate when TCs are configured.
--- drivers/net/ethernet/intel/ice/ice_main.c | 7 +++++++ drivers/net/ethernet/intel/ice/ice_tc_lib.c | 22 ++++++++++----------- drivers/net/ethernet/intel/ice/ice_tc_lib.h | 1 + 3 files changed, 19 insertions(+), 11 deletions(-)
drivers/net/ethernet/intel/ice/ice_main.c +7 -0
@@ -5739,6 +5739,13 @@ ice_set_tx_maxrate(struct net_device *netdev, int queue_index, u32 maxrate) q_handle = vsi->tx_rings[queue_index]->q_handle; tc =ice_dcb_get_tc (vsi, queue_index); + vsi =ice_locate_vsi_using_queue (vsi, queue_index); +if (!vsi) { +netdev_err (netdev,"Invalid VSI for given queue %d\n" , + queue_index); +return -EINVAL ; + } +/* Set BW back to default, when user set maxrate to 0 */ if (!maxrate) status = ice_cfg_q_bw_dflt_lmt(vsi->port_info, vsi->idx, tc,
drivers/net/ethernet/intel/ice/ice_tc_lib.c +11 -11
@@ -750,17 +750,16 @@ ice_eswitch_add_tc_fltr(struct ice_vsi *vsi, struct ice_tc_flower_fltr *fltr)/** * ice_locate_vsi_using_queue - locate VSI using queue (forward to queue action) * @vsi: Pointer to VSI -* @tc_fltr: Pointer to tc_flower_filter +* @queue: Queue index * -* Locate the VSI using specified queue. When ADQ is not enabled, always -* return input VSI, otherwise locate corresponding VSI based on per channel -* offset and qcount +* Locate the VSI using specified "queue". When ADQ is not enabled, +* always return input VSI, otherwise locate corresponding +* VSI based on per channel "offset" and "qcount" */ -static struct ice_vsi * -ice_locate_vsi_using_queue (struct ice_vsi *vsi, -struct ice_tc_flower_fltr *tc_fltr) +struct ice_vsi * +ice_locate_vsi_using_queue (struct ice_vsi *vsi,int queue) { -int num_tc, tc, queue; +int num_tc, tc;/* if ADQ is not active, passed VSI is the candidate VSI */ if (!ice_is_adq_active (vsi->back))
@@ -770,7 +769,6 @@ ice_locate_vsi_using_queue(struct ice_vsi *vsi,* upon queue number) */ num_tc = vsi->mqprio_qopt.qopt.num_tc; - queue = tc_fltr->action.fwd.q.queue;for (tc =0 ; tc < num_tc; tc++) {int qcount = vsi->mqprio_qopt.qopt.count[tc];
@@ -812,6 +810,7 @@ ice_tc_forward_action(struct ice_vsi *vsi, struct ice_tc_flower_fltr *tc_fltr)struct ice_pf *pf = vsi->back;struct device *dev;u32 tc_class; +int q; dev =ice_pf_to_dev (pf);
@@ -840,7 +839,8 @@ ice_tc_forward_action(struct ice_vsi *vsi, struct ice_tc_flower_fltr *tc_fltr)/* Determine destination VSI even though the action is * FWD_TO_QUEUE, because QUEUE is associated with VSI */ - dest_vsi = tc_fltr->dest_vsi; + q = tc_fltr->action.fwd.q.queue; + dest_vsi =ice_locate_vsi_using_queue (vsi, q);break ;default : dev_err(dev,
@@ -1716,7 +1716,7 @@ ice_tc_forward_to_queue(struct ice_vsi *vsi, struct ice_tc_flower_fltr *fltr,/* If ADQ is configured, and the queue belongs to ADQ VSI, then prepare * ADQ switch filter */ - ch_vsi =ice_locate_vsi_using_queue (vsi, fltr); + ch_vsi =ice_locate_vsi_using_queue (vsi, fltr->action.fwd.q.queue);if (!ch_vsi)return -EINVAL ; fltr->dest_vsi = ch_vsi;
drivers/net/ethernet/intel/ice/ice_tc_lib.h +1 -0
@@ -204,6 +204,7 @@ static inline int ice_chnl_dmac_fltr_cnt(struct ice_pf *pf)return pf->num_dmac_chnl_fltrs; } +struct ice_vsi *ice_locate_vsi_using_queue (struct ice_vsi *vsi,int queue);int ice_add_cls_flower (struct net_device *netdev,struct ice_vsi *vsi,struct flow_cls_offload *cls_flower);
Signature · 1 line
2.38.1
Re: [PATCH net 2/2] ice: Fix tx queue rate limit when TCs are configured
Quoted 12 lines · Tony Nguyen
From: Sridhar Samudrala <[email protected]>
Configuring
tx_maxratevia sysfs interface/sys/class/net/eth0/queues/tx-1/tx_maxratewas not working when TCs are configured because always main VSI was being used. Fix by using correct VSI inice_set_tx_maxratewhen TCs are configured.Fixes 1ddef455f4a8 ("ice: Add NDO callback to set the maximum per-queue bitrate")Signed-off-by Sridhar Samudrala <[email protected]>Signed-off-by Sudheer Mogilappagari <[email protected]>Tested-by Bharathi Sreenivas <[email protected]>Signed-off-by Tony Nguyen <[email protected]>
Quoted 6 lines
--- drivers/net/ethernet/intel/ice/ice_main.c | 7 +++++++ drivers/net/ethernet/intel/ice/ice_tc_lib.c | 22 ++++++++++----------- drivers/net/ethernet/intel/ice/ice_tc_lib.h | 1 + 3 files changed, 19 insertions(+), 11 deletions(-)
Thanks,
This series was applied to netdev/net.git (main) by Tony Nguyen <[email protected]>:
Hello:
This series was applied to netdev/net.git (main)
by Tony Nguyen <[email protected]>:
Quoted 6 lines · On Wed, 5 Jul 2023 13:13:44 -0700 you wrote:
This series contains updates to ice driver only.
Sridhar fixes incorrect comparison of max Tx rate limit to occur against each TC value rather than the aggregate. He also resolves an issue with the wrong VSI being used when setting max Tx rate when TCs are enabled.
Quoted 6 lines
The following are changes since commit
c451410ca7e3d8eeb31d141fc20c200e21754ba4:
Merge branch 'mptcp-fixes'
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue100GbE[...]
Here is the summary with links:
- [net,1/2] ice: Fix max_rate check while configuring TX rate limits
https://git.kernel.org/netdev/net/c/5f16da6ee6ac - [net,2/2] ice: Fix tx queue rate limit when TCs are configured https://git.kernel.org/netdev/net/c/479cdfe388a0
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html