scsi: storvsc: Handle SRB status value 0x30
Subsystems (3)
PATCH 1/1 scsi: storvsc: Handle SRB status value 0x30
In response to a disk I/O request, Hyper-V has been observed to return SRB status value 0x30. This indicates the request was not processed by Hyper-V because low memory conditions on the host caused an internal error. The 0x30 status is not recognized by storvsc, so the I/O operation is not flagged as an error. The request is treated as if it completed normally but with zero data transferred, causing a flood of retries.
Add a definition for this SRB status value and handle it like other error statuses from the Hyper-V host.
--- drivers/scsi/storvsc_drv.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/storvsc_drv.c +2 -0
@@ -318,6 +318,7 @@ enum storvsc_request_type {#define SRB_STATUS_INVALID_REQUEST 0x06#define SRB_STATUS_DATA_OVERRUN 0x12#define SRB_STATUS_INVALID_LUN 0x20 +#define SRB_STATUS_INTERNAL_ERROR 0x30#define SRB_STATUS (status) \ (status & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN))
@@ -978,6 +979,7 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,case SRB_STATUS_ERROR :case SRB_STATUS_ABORTED :case SRB_STATUS_INVALID_REQUEST : +case SRB_STATUS_INTERNAL_ERROR :if (vm_srb->srb_status &SRB_STATUS_AUTOSENSE_VALID ) {/* Check for capacity change */ if ((asc ==0x2a ) && (ascq ==0x9 )) {
Signature · 1 line
1.8.3.1
Martin K. Petersen
AppliedMichael,
Quoted 7 lines
In response to a disk I/O request, Hyper-V has been observed to return SRB status value
0x30. This indicates the request was not processed by Hyper-V because low memory conditions on the host caused an internal error. The0x30status is not recognized by storvsc, so the I/O operation is not flagged as an error. The request is treated as if it completed normally but with zero data transferred, causing a flood of retries.
Applied to 6.5/scsi-fixes, thanks!
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering