phy: qcom-qmp-ufs: convert to newer style of bindings
Subsystems (4)
v4 cover phy: qcom-qmp-ufs: convert to newer style of bindings
Reviewing several patchsets for newer platforms made me understand that having two styles of QMP PHY bindings causes confusion. Despite binding documents having notes telling that old bindings should be used for older platforms, it is too easy to attempt adding new platform with older QMP PHY binding. Thus let's have just a single documented style of bindings.
Changes since v3:
- Rebased on top of phy-next
Changes since v2:
- Moved status property to the last place for msm8998, sdm845 (Konrad)
Changes since v1:
- Split large patchset into smaller parts
- Rebased on phy/next
Dmitry Baryshkov (11):
dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml
phy: qcom-qmp-ufs: populate offsets configuration
arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings
arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings
arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings
arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings
arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings
arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings
arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings
arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings
arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings
.../phy/qcom,msm8996-qmp-ufs-phy.yaml | 228 ------------------ .../phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 48 +++- arch/arm64/boot/dts/qcom/msm8996.dtsi | 25 +- arch/arm64/boot/dts/qcom/msm8998.dtsi | 18 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 19 +- arch/arm64/boot/dts/qcom/sm6115.dtsi | 17 +- arch/arm64/boot/dts/qcom/sm6350.dtsi | 18 +- arch/arm64/boot/dts/qcom/sm8150.dtsi | 20 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 20 +- arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 +-- arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 +-- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 10 + 12 files changed, 114 insertions(+), 365 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
Signature · 1 line
2.39.2
PATCH v4 1/11 dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml
Migrate legacy bindings (described in qcom,msm8996-qmp-ufs-phy.yaml) to qcom,sc8280xp-qmp-ufs-phy.yaml. This removes a need to declare the child PHY node or split resource regions.
--- .../phy/qcom,msm8996-qmp-ufs-phy.yaml | 228 ------------------ .../phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 48 +++- 2 files changed, 45 insertions(+), 231 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml deleted +0 -228
@@ -1,228 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-ufs-phy.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QMP PHY controller (UFS, MSM8996) - -maintainers: - - Vinod Koul <[email protected]> - -description: - QMP PHY controller supports physical layer functionality for a number of - controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-ufs-phy.yaml. - -properties: - compatible: - enum: - - qcom,msm8996-qmp-ufs-phy - - qcom,msm8998-qmp-ufs-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - - qcom,sm8350-qmp-ufs-phy - - qcom,sm8450-qmp-ufs-phy - - reg: - items: - - description: serdes - - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - - clocks: - minItems: 1 - maxItems: 3 - - clock-names: - minItems: 1 - maxItems: 3 - - power-domains: - maxItems: 1 - - resets: - maxItems: 1 - - reset-names: - items: - - const: ufsphy - - vdda-phy-supply: true - - vdda-pll-supply: true - - vddp-ref-clk-supply: true - -patternProperties: - "^phy@[0-9a-f]+$": - type: object - description: single PHY-provider child node - properties: - reg: - minItems: 3 - maxItems: 6 - - "#clock-cells": - const: 1 - - "#phy-cells": - const: 0 - - required: - - reg - - "#phy-cells" - - additionalProperties: false - -required: - - compatible - - reg - - "#address-cells" - - "#size-cells" - - ranges - - clocks - - clock-names - - resets - - reset-names - - vdda-phy-supply - - vdda-pll-supply - -additionalProperties: false - -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 1 - clock-names: - items: - - const: ref - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 2 - clock-names: - items: - - const: ref - - const: ref_aux - - - if: - properties: - compatible: - contains: - enum: - - qcom,sm8450-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: ref - - const: ref_aux - - const: qref - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - - qcom,sm8350-qmp-ufs-phy - - qcom,sm8450-qmp-ufs-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX lane 1 - - description: RX lane 1 - - description: PCS - - description: TX lane 2 - - description: RX lane 2 - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sm8250.h> - #include <dt-bindings/clock/qcom,rpmh.h> - - phy-wrapper@1d87000 { - compatible = "qcom,sm8250-qmp-ufs-phy"; - reg = <0x01d87000 0x1c0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x01d87000 0x1000>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - - vdda-phy-supply = <&vreg_l6b>; - vdda-pll-supply = <&vreg_l3b>; - - phy@400 { - reg = <0x400 0x108>, - <0x600 0x1e0>, - <0xc00 0x1dc>, - <0x800 0x108>, - <0xa00 0x1e0>; - #phy-cells = <0>; - }; - };
Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +45 -3
85 lines not on this page · raw message
Signature · 1 line
2.39.2
PATCH v4 2/11 phy: qcom-qmp-ufs: populate offsets configuration
In reply to Dmitry BaryshkovPopulate offsets configuration for the rest of UFS PHYs to make it possible to switch them to the new (single-node) bindings style.
--- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +10 -0
@@ -833,6 +833,8 @@ static const struct qmp_ufs_offsets qmp_ufs_offsets_v6 = {static const struct qmp_phy_cfg msm8996_ufsphy_cfg = { .lanes =1 , + .offsets = &qmp_ufs_offsets, + .tbls = { .serdes = msm8996_ufsphy_serdes, .serdes_num =ARRAY_SIZE (msm8996_ufsphy_serdes),
@@ -924,6 +926,8 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .lanes =2 , + .offsets = &qmp_ufs_offsets, + .tbls = { .serdes = sdm845_ufsphy_serdes, .serdes_num =ARRAY_SIZE (sdm845_ufsphy_serdes),
@@ -1038,6 +1042,8 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .lanes =2 , + .offsets = &qmp_ufs_offsets, + .tbls = { .serdes = sm8150_ufsphy_serdes, .serdes_num =ARRAY_SIZE (sm8150_ufsphy_serdes),
@@ -1070,6 +1076,8 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = {static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .lanes =2 , + .offsets = &qmp_ufs_offsets, + .tbls = { .serdes = sm8350_ufsphy_serdes, .serdes_num =ARRAY_SIZE (sm8350_ufsphy_serdes),
@@ -1102,6 +1110,8 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .lanes =2 , + .offsets = &qmp_ufs_offsets, + .tbls = { .serdes = sm8350_ufsphy_serdes, .serdes_num =ARRAY_SIZE (sm8350_ufsphy_serdes),
Signature · 1 line
2.39.2
PATCH v4 3/11 arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/msm8996.dtsi | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-)
arch/arm64/boot/dts/qcom/msm8996.dtsi +9 -16
@@ -728,9 +728,9 @@ gcc: clock-controller@300000 { <&pciephy_1>, <&pciephy_2>, <&ssusb_phy_0>, - <&ufsphy_lane 0>, - <&ufsphy_lane 1>, - <&ufsphy_lane 2>; + <&ufsphy 0>, + <&ufsphy 1>, + <&ufsphy 2>; clock-names = "cxo", "cxo2", "sleep_clk",
@@ -1995,7 +1995,7 @@ ufshc: ufshc@624000 { reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lane>; + phys = <&ufsphy>; phy-names = "ufsphy"; power-domains = <&gcc UFS_GDSC>;
@@ -2048,25 +2048,18 @@ ufshc: ufshc@624000 { ufsphy: phy@627000 { compatible = "qcom,msm8996-qmp-ufs-phy"; - reg = <0x00627000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00627000 0x1000>; clocks = <&gcc GCC_UFS_CLKREF_CLK>; clock-names = "ref"; resets = <&ufshc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufsphy_lane: phy@627400 { - reg = <0x627400 0x12c>, - <0x627600 0x200>, - <0x627c00 0x1b4>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; camss: camss@a34000 {
Signature · 1 line
2.39.2
PATCH v4 4/11 arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/msm8998.dtsi | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-)
arch/arm64/boot/dts/qcom/msm8998.dtsi +4 -14
@@ -984,7 +984,7 @@ ufshc: ufshc@1da4000 { compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x01da4000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lanes>; + phys = <&ufsphy>; phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_GDSC>;
@@ -1025,11 +1025,7 @@ ufshc: ufshc@1da4000 { ufsphy: phy@1da7000 { compatible = "qcom,msm8998-qmp-ufs-phy"; - reg = <0x01da7000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; + reg = <0x01da7000 0x1000>; clock-names = "ref",
@@ -1041,14 +1037,8 @@ ufsphy: phy@1da7000 { reset-names = "ufsphy"; resets = <&ufshc 0>; - ufsphy_lanes: phy@1da7400 { - reg = <0x01da7400 0x128>, - <0x01da7600 0x1fc>, - <0x01da7c00 0x1dc>, - <0x01da7800 0x128>, - <0x01da7a00 0x1fc>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + status = "disabled"; }; tcsr_mutex: hwlock@1f40000 {
Signature · 1 line
2.39.2
PATCH v4 5/11 arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-)
arch/arm64/boot/dts/qcom/sdm845.dtsi +5 -14
@@ -2575,7 +2575,7 @@ ufs_mem_hc: ufshc@1d84000 { <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_PHY_GDSC>;
@@ -2621,10 +2621,8 @@ ufs_mem_hc: ufshc@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sdm845-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2632,16 +2630,9 @@ ufs_mem_phy: phy@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + status = "disabled"; }; cryptobam: dma-controller@1dc4000 {
Signature · 1 line
2.39.2
PATCH v4 6/11 arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/sm6115.dtsi | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-)
arch/arm64/boot/dts/qcom/sm6115.dtsi +5 -12
@@ -983,7 +983,7 @@ ufs_mem_hc: ufs@4804000 { reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <1>; #reset-cells = <1>;
@@ -1024,24 +1024,17 @@ ufs_mem_hc: ufs@4804000 { ufs_mem_phy: phy@4807000 { compatible = "qcom,sm6115-qmp-ufs-phy"; - reg = <0x0 0x04807000 0x0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0x0 0x04807000 0x0 0x1000>; clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; clock-names = "ref", "ref_aux"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@4807400 { - reg = <0x0 0x04807400 0x0 0x098>, - <0x0 0x04807600 0x0 0x130>, - <0x0 0x04807c00 0x0 0x16c>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; gpi_dma0: dma-controller@4a00000 {
Signature · 1 line
2.39.2
PATCH v4 7/11 arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/sm6350.dtsi | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-)
arch/arm64/boot/dts/qcom/sm6350.dtsi +4 -14
@@ -1142,7 +1142,7 @@ ufs_mem_hc: ufs@1d84000 { <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>;
@@ -1187,10 +1187,7 @@ ufs_mem_hc: ufs@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm6350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; clock-names = "ref", "ref_aux";
@@ -1200,16 +1197,9 @@ ufs_mem_phy: phy@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; + #phy-cells = <0>; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x128>, - <0 0x01d87600 0 0x1fc>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x128>, - <0 0x01d87a00 0 0x1fc>; - #phy-cells = <0>; - }; + status = "disabled"; }; ipa: ipa@1e40000 {
Signature · 1 line
2.39.2
PATCH v4 8/11 arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/sm8150.dtsi | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-)
arch/arm64/boot/dts/qcom/sm8150.dtsi +6 -14
@@ -2025,7 +2025,7 @@ ufs_mem_hc: ufshc@1d84000 { <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>;
@@ -2070,10 +2070,8 @@ ufs_mem_hc: ufshc@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8150-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2083,16 +2081,10 @@ ufs_mem_phy: phy@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 {
Signature · 1 line
2.39.2
PATCH v4 9/11 arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/sm8250.dtsi | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-)
arch/arm64/boot/dts/qcom/sm8250.dtsi +6 -14
@@ -2169,7 +2169,7 @@ ufs_mem_hc: ufshc@1d84000 { "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>;
@@ -2213,10 +2213,8 @@ ufs_mem_hc: ufshc@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8250-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2224,16 +2222,10 @@ ufs_mem_phy: phy@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 {
Signature · 7 lines
2.39.2 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
PATCH v4 10/11 arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-)
arch/arm64/boot/dts/qcom/sm8350.dtsi +10 -18
@@ -673,9 +673,9 @@ gcc: clock-controller@100000 { <0>, <0>, <0>, - <&ufs_mem_phy_lanes 0>, - <&ufs_mem_phy_lanes 1>, - <&ufs_mem_phy_lanes 2>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>; };
@@ -1675,7 +1675,7 @@ ufs_mem_hc: ufshc@1d84000 { "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>;
@@ -1719,10 +1719,8 @@ ufs_mem_hc: ufshc@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -1730,17 +1728,11 @@ ufs_mem_phy: phy@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 {
Signature · 1 line
2.39.2
PATCH v4 11/11 arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings
In reply to Dmitry BaryshkovChange the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes).
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-)
arch/arm64/boot/dts/qcom/sm8450.dtsi +10 -18
@@ -751,9 +751,9 @@ gcc: clock-controller@100000 { <&pcie0_lane>, <&pcie1_lane>, <0>, - <&ufs_mem_phy_lanes 0>, - <&ufs_mem_phy_lanes 1>, - <&ufs_mem_phy_lanes 2>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "sleep_clk",
@@ -4122,7 +4122,7 @@ ufs_mem_hc: ufshc@1d84000 { "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>;
@@ -4171,10 +4171,8 @@ ufs_mem_hc: ufshc@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8450-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux", "qref"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -4182,17 +4180,11 @@ ufs_mem_phy: phy@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; ice: crypto@1d88000 {
Signature · 1 line
2.39.2
Re: (subset) [PATCH v4 00/11] phy: qcom-qmp-ufs: convert to newer style of bindings
In reply to Dmitry BaryshkovQuoted 8 lines · Dmitry Baryshkov
Reviewing several patchsets for newer platforms made me understand that having two styles of QMP PHY bindings causes confusion. Despite binding documents having notes telling that old bindings should be used for older platforms, it is too easy to attempt adding new platform with older QMP PHY binding. Thus let's have just a single documented style of bindings.
[...]
Applied, thanks!
[01/11] dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml
commit: cd296e74242918f91bb86da0c67d8456338cbb16
[02/11] phy: qcom-qmp-ufs: populate offsets configuration
commit: e2d9dbc01cb305af625c6db83c451645eef64470Best regards,
Signature · 8 lines
~Vinod -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy