Skip to contentSkip to conversation

selftests: bonding: do not set port down before adding to bond

PATCH Applied Hangbin Liu 3 participants 3 messages Aug 17, 2023 – Aug 22, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 selftests: bonding: do not set port down before adding to bond

Before adding a port to bond, it need to be set down first. In the lacpdu test the author set the port down specifically. But commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") changed the operation order, the kernel will set the port down _after_ adding to bond. So all the ports will be down at last and the test failed.

In fact, the veth interfaces are already inactive when added. This means there's no need to set them down again before adding to the bond. Let's just remove the link down operation.

---
PS: I'm not sure if this should be a regression of a4abfa627c38.

---
 .../selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh     | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh +2 -2
index 47ab90596acb..6358df5752f9 100755
@@ -57,8 +57,8 @@ ip link add name veth2-bond type veth peer name veth2-end
 
 # add ports
 ip link set fbond master fab-br0
-ip link set veth1-bond down master fbond
-ip link set veth2-bond down master fbond
+ip link set veth1-bond master fbond
+ip link set veth2-bond master fbond
 
 # bring up
 ip link set veth1-end up
Signature · 1 line
2.38.1
#1 lore raw
Quoted 10 lines · Hangbin Liu

Before adding a port to bond, it need to be set down first. In the lacpdu test the author set the port down specifically. But commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") changed the operation order, the kernel will set the port down _after_ adding to bond. So all the ports will be down at last and the test failed.

In fact, the veth interfaces are already inactive when added. This means there's no need to set them down again before adding to the bond. Let's just remove the link down operation.

Quoted 5 lines

---
PS: I'm not sure if this should be a regression of a4abfa627c38.

Well, in theory it might be as ip-link's behaviour changed in this detail. Yet:

Quoted 1 line

-ip link set veth1-bond down master fbond

Without prior knowledge of kernel interna[1], one would expect this command to result in veth1-bond being enslaved and down, irrespective of in which order the link changes happen.

The command my patch enables, namely:

| ip link set veth1-bond up master fbond

is actually intuitive. OK, it won't work if veth1-bond is up already. But I guess that's rather a missing feature (bridge driver supports it for instance).

Cheers, Phil

[1] - link-state change happens before master assignment
- bond driver "ups" newly attached ports

#2 lore raw
In reply to Hangbin Liu
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:

Quoted 11 lines · On Thu, 17 Aug 2023 16:24:59 +0800 you wrote:

Before adding a port to bond, it need to be set down first. In the lacpdu test the author set the port down specifically. But commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") changed the operation order, the kernel will set the port down _after_ adding to bond. So all the ports will be down at last and the test failed.

In fact, the veth interfaces are already inactive when added. This means there's no need to set them down again before adding to the bond. Let's just remove the link down operation.

[...]

Here is the summary with links:
- [net] selftests: bonding: do not set port down before adding to bond

    https://git.kernel.org/netdev/net/c/be809424659c

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html