Skip to contentSkip to conversation

ahci: compile out msi/msix infrastructure

PATCH New Dan Williams 2 participants 5 messages Dec 4, 2015 – Dec 6, 2015 libata

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ahci: compile out msi/msix infrastructure

Quoting Arnd:
The AHCI driver is used for some on-chip devices that do not use PCI for probing, and it can be built even when CONFIG_PCI is disabled, but that now results in a build failure:

ata/libahci.c: In function 'ahci_host_activate_multi_irqs':
ata/libahci.c:2475:4: error: invalid use of undefined type 'struct msix_entry' ata/libahci.c:2475:21: error: dereferencing pointer to incomplete type 'struct msix_entry'

Add ifdef CONFIG_PCI_MSI infrastructure to compile out the mutli-msi and multi-msix code.

Fixes d684a90d38e2 ("ahci: per-port msix support")
---
 drivers/ata/ahci.h    |   25 +++++++++++++++++++++++--
 drivers/ata/libahci.c |    7 +------
 2 files changed, 24 insertions(+), 8 deletions(-)
drivers/ata/ahci.h +23 -2
index 878470f9c3e2..e3d888d4b6d0 100644
@@ -237,12 +237,18 @@ enum {
 	AHCI_HFLAG_DELAY_ENGINE		= (1 << 15), /* do not start engine on
 						        port start (wait until
 						        error-handling stage) */
-	AHCI_HFLAG_MULTI_MSI		= (1 << 16), /* multiple PCI MSIs */
 	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
 	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
 	AHCI_HFLAG_EDGE_IRQ		= (1 << 19), /* HOST_IRQ_STAT behaves as
 							Edge Triggered */
-	AHCI_HFLAG_MULTI_MSIX		= (1 << 20), /* per-port MSI-X */
+#ifdef CONFIG_PCI_MSI
+	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* multiple PCI MSIs */
+	AHCI_HFLAG_MULTI_MSIX		= (1 << 21), /* per-port MSI-X */
+#else
+	/* compile out MSI infrastructure */
+	AHCI_HFLAG_MULTI_MSI		= 0,
+	AHCI_HFLAG_MULTI_MSIX		= 0,
+#endif
 
 	/* ap->flags bits */
 
@@ -355,6 +361,21 @@ struct ahci_host_priv {
 	void			(*start_engine)(struct ata_port *ap);
 };
 
+#ifdef CONFIG_PCI_MSI
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+	if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
+		return hpriv->msix[i].vector;
+	else
+		return hpriv->irq + i;
+}
+#else
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+	return hpriv->irq;
+}
+#endif
+
 extern int ahci_ignore_sss;
 
 extern struct device_attribute *ahci_shost_attrs[];
drivers/ata/libahci.c +1 -6
index 1b6c7cc415bf..eda3cf2163bb 100644
@@ -2469,12 +2469,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host,
 	 */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ahci_port_priv *pp = host->ports[i]->private_data;
-		int irq;
-
-		if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
-			irq = hpriv->msix[i].vector;
-		else
-			irq = hpriv->irq + i;
+		int irq = ahci_irq_vector(hpriv, i);
 
 		/* Do not receive interrupts sent by dummy ports */
 		if (!pp) {
#1 lore raw

PATCH 1/1 ahci: compile out msi/msix infrastructure

Quoted 9 lines · On Friday 04 December 2015 11:58:30 Dan Williams wrote:

Quoting Arnd:
The AHCI driver is used for some on-chip devices that do not use PCI for probing, and it can be built even when CONFIG_PCI is disabled, but that now results in a build failure:

ata/libahci.c: In function 'ahci_host_activate_multi_irqs':
ata/libahci.c:2475:4: error: invalid use of undefined type 'struct msix_entry' ata/libahci.c:2475:21: error: dereferencing pointer to incomplete type 'struct msix_entry'

Quoted 7 lines

Add ifdef CONFIG_PCI_MSI infrastructure to compile out the mutli-msi and multi-msix code.

Fixes d684a90d38e2 ("ahci: per-port msix support")

Thanks a lot, looks good. I've verified that this fixes the build on the configuration that failed earlier.

#2 lore raw

PATCH 1/1 ahci: compile out msi/msix infrastructure

In reply to Dan Williams

drivers/ata/ahci.h struct ahci_host_priv { · line 371

Quoted 9 lines · On Friday 04 December 2015 11:58:30 Dan Williams wrote:
drivers/ata/ahci.h +8 -0
+#ifdef CONFIG_PCI_MSI
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+       if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
+               return hpriv->msix[i].vector;
+       else
+               return hpriv->irq + i;
+}

My randconfig tests now noticed that 'i' is undeclared here. I suppose it should be 'port' instead of 'i'?

Arnd

#3 lore raw

PATCH 1/1 ahci: compile out msi/msix infrastructure

Quoted 14 lines · On Saturday 05 December 2015 23:22:49 Arnd Bergmann wrote:

Review

Quoted 9 lines · On Friday 04 December 2015 11:58:30 Dan Williams wrote:
(quoted diff) +8 -0
+#ifdef CONFIG_PCI_MSI
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+       if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
+               return hpriv->msix[i].vector;
+       else
+               return hpriv->irq + i;
+}

My randconfig tests now noticed that 'i' is undeclared here. I suppose it should be 'port' instead of 'i'?

and one more:

In file included from /git/arm-soc/drivers/ata/ahci_platform.c:25:0:
/git/arm-soc/drivers/ata/ahci.h: In function 'ahci_irq_vector':
/git/arm-soc/drivers/ata/ahci.h:368:3: error: invalid use of undefined type 'struct msix_entry'
return hpriv->msix[port].vector;
^
/git/arm-soc/drivers/ata/ahci.h:368:21: error: dereferencing pointer to incomplete type 'struct msix_entry'
return hpriv->msix[port].vector;

drivers/ata/ahci.h +1 -0
index c450b8a914eb..dfbd033706bb 100644
@@ -37,6 +37,7 @@
 
 #include <linux/clk.h>
 #include <linux/libata.h>
+#include <linux/pci.h>
 #include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 
#4 lore raw

PATCH 1/1 ahci: compile out msi/msix infrastructure

Quoted 32 lines · Arnd Bergmann
Quoted 14 lines · On Saturday 05 December 2015 23:22:49 Arnd Bergmann wrote:

Review

Quoted 9 lines · On Friday 04 December 2015 11:58:30 Dan Williams wrote:
(quoted diff) +8 -0
+#ifdef CONFIG_PCI_MSI
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+       if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
+               return hpriv->msix[i].vector;
+       else
+               return hpriv->irq + i;
+}

My randconfig tests now noticed that 'i' is undeclared here. I suppose it should be 'port' instead of 'i'?

and one more:

In file included from /git/arm-soc/drivers/ata/ahci_platform.c:25:0:
/git/arm-soc/drivers/ata/ahci.h: In function 'ahci_irq_vector':
/git/arm-soc/drivers/ata/ahci.h:368:3: error: invalid use of undefined type 'struct msix_entry'

   return hpriv->msix[port].vector;
   ^

/git/arm-soc/drivers/ata/ahci.h:368:21: error: dereferencing pointer to incomplete type 'struct msix_entry'
return hpriv->msix[port].vector;

drivers/ata/ahci.h +0 -0
index c450b8a914eb..dfbd033706bb 100644

drivers/ata/ahci.h line 43

Quoted 7 lines
drivers/ata/ahci.h +1 -0
@@ -37,6 +37,7 @@
 
 #include <linux/clk.h>
 #include <linux/libata.h>
+#include <linux/pci.h>
 #include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 

I'll resend, sloppy on my part.