X not working with Radeon 9200 under 2.6.11
Hi. I Have a Radeon 9200c and ever since some time in the 2.6.9 series, I cannot get X to start using this card. It dies in such a way that there is no way to get the vga console out of that console and chvt from another terminal just hangs and xinit cannot be cancelled.
This is the lspci for the agp card.
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) (prog-if 00 [VGA])
Subsystem: PC Partner Limited: Unknown device 7c26
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e8000000 (32-bit, prefetchable) [size=128M] I/O ports at e000 [size=256]
Memory at fbe00000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fbd00000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 2
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
Subsystem: PC Partner Limited: Unknown device 7c27
Flags: bus master, 66MHz, medium devsel, latency 64 Memory at f0000000 (32-bit, prefetchable) [size=128M] Memory at fbf00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Any assistance would be appreciated.
Signature · 4 lines
Your life is like a penny -- how are you going to spend it?
John Covici
[email protected]Quoted 6 lines · John covici
Hi. I Have a Radeon 9200c and ever since some time in the 2.6.9 series, I cannot get X to start using this card. It dies in such a way that there is no way to get the vga console out of that console and chvt from another terminal just hangs and xinit cannot be cancelled.
John, it would be useful if you could test 2.6.12-rc1-mm1, which has a few fixes in this area.
Would it be correct to assume that you are not using either of the radeon fbdev drivers?
And are you using the kernel's DRI drivers?
Thanks.
Quoted 32 lines
This is the lspci for the agp card.
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) (prog-if 00 [VGA])
Subsystem: PC Partner Limited: Unknown device 7c26
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory ate8000000(32-bit, prefetchable) [size=128M] I/O ports at e000 [size=256]
Memory atfbe00000(32-bit, non-prefetchable) [size=64K] Expansion ROM atfbd00000[disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 20000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
Subsystem: PC Partner Limited: Unknown device 7c27
Flags: bus master, 66MHz, medium devsel, latency 64 Memory atf0000000(32-bit, prefetchable) [size=128M] Memory atfbf00000(32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2Any assistance would be appreciated.
Signature · 9 lines
Your life is like a penny -- how are you going to spend it? John Covici [email protected] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Yep, no fb drivers, but someone did point me in the direction of the x.org server and the crash went away using that server. These are unofficial Debian packages -- for more information look at
http://www.nixnuts.net/files .
on Monday 03/21/2005 Andrew Morton([email protected]) wrote
Quoted 50 lines
Quoted 6 lines · John covici
Hi. I Have a Radeon 9200c and ever since some time in the 2.6.9 series, I cannot get X to start using this card. It dies in such a way that there is no way to get the vga console out of that console and chvt from another terminal just hangs and xinit cannot be cancelled.
John, it would be useful if you could test 2.6.12-rc1-mm1, which has a few fixes in this area.
Would it be correct to assume that you are not using either of the radeon fbdev drivers?
And are you using the kernel's DRI drivers?
Thanks.
Quoted 32 lines
This is the lspci for the agp card.
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) (prog-if 00 [VGA])
Subsystem: PC Partner Limited: Unknown device 7c26
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory ate8000000(32-bit, prefetchable) [size=128M] I/O ports at e000 [size=256]
Memory atfbe00000(32-bit, non-prefetchable) [size=64K] Expansion ROM atfbd00000[disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 20000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
Subsystem: PC Partner Limited: Unknown device 7c27
Flags: bus master, 66MHz, medium devsel, latency 64 Memory atf0000000(32-bit, prefetchable) [size=128M] Memory atfbf00000(32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2Any assistance would be appreciated.
Signature · 9 lines
Your life is like a penny -- how are you going to spend it? John Covici [email protected] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Signature · 4 lines
Your life is like a penny -- how are you going to spend it?
John Covici
[email protected]Quoted 5 lines · John covici
Yep, no fb drivers, but someone did point me in the direction of the x.org server and the crash went away using that server. These are unofficial Debian packages -- for more information look at
http://www.nixnuts.net/files .
It's a bit sad that xfree _used_ to work (2.6.9?) and now it doesn't work, and the fix is to switch to the x.org server.
Do we know what changed to cause this? Was it deliberate?
Quoted 5 lines
It's a bit sad that xfree _used_ to work (2.6.9?) and now it doesn't work, and the fix is to switch to the x.org server.
Do we know what changed to cause this? Was it deliberate?
If I was a guessing man and I am due to lack of time.. I'd say the address space layout changes .. I doubt the macro removal patches could have done anything that bad.. I suppose I could go and re-install Fedora Core 1 somewhere...
Dave.
Quoted 9 lines · Dave Airlie
Quoted 6 lines
It's a bit sad that xfree _used_ to work (2.6.9?) and now it doesn't work, and the fix is to switch to the x.org server.
Do we know what changed to cause this? Was it deliberate?
If I was a guessing man and I am due to lack of time.. I'd say the address space layout changes ..
Ow. I never saw any such reports.
It should be pretty easy to test that: do
echo 1 > /proc/sys/vm/legacy_va_layout
before starting X.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Do we know what changed to cause this? Was it deliberate?
If I was a guessing man and I am due to lack of time.. I'd say the address space layout changes ..
Ow. I never saw any such reports.
as I said only a guess .. when someone mentions 2.6.9 to me I always think address space changes :-)
I've hopefully got a full day barring jetlag to try and get the 2.6 drm straightened out.. of course on my machine it all works wonderfully... so I need to get more machines :-)
Dave.
Quoted 5 lines
It's a bit sad that xfree _used_ to work (2.6.9?) and now it doesn't work, and the fix is to switch to the x.org server.
Do we know what changed to cause this? Was it deliberate?
Okay I installed Debian Sarge today and found a bug in the drm version ioctls alright with the older interface that XFree86 4.3 uses...
Anyone want to test this patch (Andrew I'll put it my -mm tree ASAP)...
I'm still at a loss to reproduce the brige problems ppl are seeing.. time to switch to i865 chipset ...
Dave.