Skip to contentSkip to conversation

mlxbf_gige: Fix intermittent no ip issue

PATCH Applied Asmaa Mnebhi 2 participants 2 messages Jan 5, 2024 – Jan 7, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 mlxbf_gige: Fix intermittent no ip issue

Although the link is up, there is no ip assigned on setups with high background traffic. Nothing is transmitted nor received. The RX error count keeps on increasing. After several minutes, the RX error count stagnates and the GigE interface finally gets an ip.

The issue is that mlxbf_gige_rx_init() is called before phy_start(). As soon as the RX DMA is enabled in mlxbf_gige_rx_init(), the RX CI reaches the max of 128, and becomes equal to RX PI. RX CI doesn't decrease since the code hasn't ran phy_start yet.
Bring the PHY up before starting the RX.

Fixes f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")

---
v3->v4:
- rebase
- Fork this patch from bundle of unrelated bug fixes.
- update the subject format

 .../ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c | 14 +++++++-------
 .../ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c   |  6 +++---
 2 files changed, 10 insertions(+), 10 deletions(-)
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c +7 -7
index b3adc491bdb9..3385cf1ef9ae 100644
@@ -147,14 +147,14 @@ static int mlxbf_gige_open(struct net_device *netdev)
 	 */
 	priv->valid_polarity = 0;
 
-	err = mlxbf_gige_rx_init(priv);
+	phy_start(phydev);
+
+	err = mlxbf_gige_tx_init(priv);
 	if (err)
 		goto free_irqs;
-	err = mlxbf_gige_tx_init(priv);
+	err = mlxbf_gige_rx_init(priv);
 	if (err)
-		goto rx_deinit;
-
-	phy_start(phydev);
+		goto tx_deinit;
 
 	netif_napi_add(netdev, &priv->napi, mlxbf_gige_poll);
 	napi_enable(&priv->napi);
@@ -176,8 +176,8 @@ static int mlxbf_gige_open(struct net_device *netdev)
 
 	return 0;
 
-rx_deinit:
-	mlxbf_gige_rx_deinit(priv);
+tx_deinit:
+	mlxbf_gige_tx_deinit(priv);
 
 free_irqs:
 	mlxbf_gige_free_irqs(priv);
drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c +3 -3
index 0d5a41a2ae01..a65fe026e1e6 100644
@@ -142,6 +142,9 @@ int mlxbf_gige_rx_init(struct mlxbf_gige *priv)
 	writeq(MLXBF_GIGE_RX_MAC_FILTER_COUNT_PASS_EN,
 	       priv->base + MLXBF_GIGE_RX_MAC_FILTER_COUNT_PASS);
 
+	writeq(ilog2(priv->rx_q_entries),
+	       priv->base + MLXBF_GIGE_RX_WQE_SIZE_LOG2);
+
 	/* Clear MLXBF_GIGE_INT_MASK 'receive pkt' bit to
 	 * indicate readiness to receive interrupts
 	 */
@@ -154,9 +157,6 @@ int mlxbf_gige_rx_init(struct mlxbf_gige *priv)
 	data |= MLXBF_GIGE_RX_DMA_EN;
 	writeq(data, priv->base + MLXBF_GIGE_RX_DMA);
 
-	writeq(ilog2(priv->rx_q_entries),
-	       priv->base + MLXBF_GIGE_RX_WQE_SIZE_LOG2);
-
 	return 0;
 
 free_wqe_and_skb:
Signature · 1 line
2.30.1
#1 lore raw
This patch was applied to netdev/net.git (main) by David S. Miller <[email protected]>:

Hello:

This patch was applied to netdev/net.git (main)
by David S. Miller <[email protected]>:

Quoted 5 lines · On Fri, 5 Jan 2024 10:59:46 -0500 you wrote:

Although the link is up, there is no ip assigned on setups with high background traffic. Nothing is transmitted nor received. The RX error count keeps on increasing. After several minutes, the RX error count stagnates and the GigE interface finally gets an ip.

Quoted 7 lines

The issue is that mlxbf_gige_rx_init() is called before phy_start(). As soon as the RX DMA is enabled in mlxbf_gige_rx_init(), the RX CI reaches the max of 128, and becomes equal to RX PI. RX CI doesn't decrease since the code hasn't ran phy_start yet.
Bring the PHY up before starting the RX.

[...]

Here is the summary with links:
- [net,v4] mlxbf_gige: Fix intermittent no ip issue

    https://git.kernel.org/netdev/net/c/ef210ef85d5c

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html