Skip to contentSkip to conversation

kernel 2.2 against 2.4 on old dual-pentium system with intel hx-chipset

DISCUSSION Dieter Ferdinand 2 participants 3 messages Jun 3, 2005 – Jun 4, 2005

lore
Share & tools
lore
#0 lore raw

hello,
i have a big problem with my old dual-pentium-systems with intel hx-chipset (gigabyte and asus mainboards).

if i use kernel 2.2, it works fine. with kernel 2.4 i must deactivate smp and i can only use one cpu. if i try to use both cpu's, the system hangs after some ours or after some times of heavy system-load.

i try some parameters (noacpi noapic) without success.

can you help me, to get the newer kernel running on this systems ?

with newer p3-systems and intel bx-chipset i can use the kernel 2.4.x, but on the old systems, only kernel 2.2 works fine.

thank you for your help and goodby

Schau auch einmal auf meine Homepage (http://go.to/dieter-ferdinand).
Dort findest du Information zu Linux, Novell, Win95, WinNT, ...

#1 lore raw

Dieter> i have a big problem with my old dual-pentium-systems with Dieter> intel hx-chipset (gigabyte and asus mainboards).

Dieter> if i use kernel 2.2, it works fine. with kernel 2.4 i must Dieter> deactivate smp and i can only use one cpu. if i try to use Dieter> both cpu's, the system hangs after some ours or after some Dieter> times of heavy system-load.

What version of 2.2 and 2.4 are you using here? Be specific! Also, send the output of /proc/cpuinfo from both 2.2 and 2.4 along with /proc/interrupts as well.

Dieter> i try some parameters (noacpi noapic) without success.

And does the system pass memtest86 for an extended amount of time? Say 24 hours?

I ran some HP Pavillion Dual processor PPro systems for quite a while under kernel 2.4 without major problems.

Dieter> can you help me, to get the newer kernel running on this systems ?

Sure, just post as many details as possible.

Do you get any output on the console when the system freezes? You should also look into setting up a serial console along with SysRq so you can try to get some debugging output when the next hang happens.

John

#2 lore raw

hello,
i test some kernel 2.4 to 2.4.29 or 30.

at the moment, i use kernel 2.2.23 on the system. the last time, i installed kernel 2.2.26 i had problems on an other system (system hangs) and i have no time, to check why, while this system must work.

i check the hardware of the system with different tools and methods and can't find any hardware-error.
i use memtest, test big gzip-achive, compile big programs like gcc and the linux- kernel to test my systems.

with actual configuration, the systems runs without problems, but on my development-system i can use kernel 2.4 only without smp.

i think a long time, the problem comes from a hardware bug, but i can't like it, if i don't know, why it don't work and make some tests on a testsystem, which is identical with one of my servers except the cpu's are a faster models, both use the same gigabyte 586hx-bords with adaptec scsi-controller and 3c905x network adapter.

the last test with my testsystem was a test of big gzip-files over the network in dual- and single-cpu-mode.
kernel 2.2.23 works fine with two cpu's, kernel 2.4.x (19 or 25) the system hangs after a some hours.
with the first 2.4 kernels, i get errors (illegal pointer values for function calls), but no more with the newest kernel-versions.

i get no informations from hanging systems.

tests with newer systems with p3-500 are ok, no system crashes with the last testet kernels.
i can only test with dual intel hx and bx boards, i have no ppro-system to test, but i can send you a compiled kernel or my configuration-file for the newest 2.4-kernel and test it on my testsystems if it hangs again.

at the moment i am installing a new server with dual p3-500 and the newest kernel 2.4.30 or newer.

i can setup my testsystem with an internet-connection, that you can connect to the system over the net with teelnet or ssh, to check the system or install other kernels. a connection to a serial-port is also possible over an internet-connection with a second system.
you can make all you want with this system, to find the bug. i have some test- systems to test hard- and software and kill them with my tests and must recover them from an image.

informations from proc-filesystem at the end of the mail!

goodby

ps: i have one BIG BIG problem, i have no need, to search for errors, they will find me all.
one example: 4 new harddisk, the first disk is dead after 4 hours, the second works, the third is in test at the moment.

Datum:   	Fri, 3 Jun 2005 11:26:44 -0400
Von:            	"John Stoffel" <[email protected]>
An:             	[email protected]
Kopie an:       	[email protected]
Betreff:        	Re: kernel 2.2 against 2.4 on old dual-pentium system with intel hx-chipset
Quoted 23 lines

Dieter> i have a big problem with my old dual-pentium-systems with Dieter> intel hx-chipset (gigabyte and asus mainboards).

Dieter> if i use kernel 2.2, it works fine. with kernel 2.4 i must Dieter> deactivate smp and i can only use one cpu. if i try to use Dieter> both cpu's, the system hangs after some ours or after some Dieter> times of heavy system-load.

What version of 2.2 and 2.4 are you using here? Be specific! Also, send the output of /proc/cpuinfo from both 2.2 and 2.4 along with /proc/interrupts as well.

Dieter> i try some parameters (noacpi noapic) without success.

And does the system pass memtest86 for an extended amount of time? Say 24 hours?

I ran some HP Pavillion Dual processor PPro systems for quite a while under kernel 2.4 without major problems.

Dieter> can you help me, to get the newer kernel running on this systems ?

Quoted 9 lines

Sure, just post as many details as possible.

Do you get any output on the console when the system freezes? You should also look into setting up a serial console along with SysRq so you can try to get some debugging output when the next hang happens.

John

my dual-pentium server:
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 2
model name : Pentium 75 - 200
stepping : 12
cpu MHz : 200.459
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic
bogomips : 399.76

processor : 1
vendor_id : GenuineIntel
cpu family : 5
model : 2
model name : Pentium 75 - 200
stepping : 12
cpu MHz : 200.459
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic
bogomips : 400.58

irq's
CPU0 CPU1

  0:   85288671          0          XT-PIC  timer
  1:         16          0          XT-PIC  keyboard
  2:          0          0          XT-PIC  cascade
  3:     421473          0          XT-PIC  serial
  5:      40052          0          XT-PIC  serial
  8:        240          0          XT-PIC  rtc
  9:    9451158          0          XT-PIC  NE2000
 11:         15          0          XT-PIC  aic7xxx
 12:   82322521          0          XT-PIC  aic7xxx, aic7xxx, eth0
 13:          1          0          XT-PIC  fpu
 15:     272319          0          XT-PIC  b1isa-150
NMI:          0
ERR:          0

my development-system:
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 3
cpu MHz : 198.953
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 396.49

irq's
CPU0

  0:   43579861          XT-PIC  timer
  1:         28          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:     148178          XT-PIC  HiSax
  8:        124          XT-PIC  rtc
  9:     216798          XT-PIC  aha1740
 10:         14          XT-PIC  aha1740
 11:         14          XT-PIC  aha1740
 12:         14          XT-PIC  aha1740
 14:     531367          XT-PIC  aic7xxx
 15:  209677227          XT-PIC  eth0, saa7146(0)
NMI:          0 
LOC:          0 
ERR:         17
MIS:          0

Schau auch einmal auf meine Homepage (http://go.to/dieter-ferdinand).
Dort findest du Information zu Linux, Novell, Win95, WinNT, ...