Skip to contentSkip to conversation

phy: qcom-qmp-usb: fix ipq8074/ipq6018 USB issues

PATCH Applied Mantas Pucka 3 participants 7 messages Jan 23, 2024 – Jan 24, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover phy: qcom-qmp-usb: fix ipq8074/ipq6018 USB issues

Two issues were found in ipq8074/ipq6018 USB support. Sending as series, because fixes touch the same code.

Mantas Pucka (2):
phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018

 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/2 phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Commit 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration") introduced register offsets to the driver but for ipq8074/ipq6018 they do not match what was in the old style device tree. Example from old ipq6018.dtsi:

<0x00078200 0x130>,     /* Tx */
<0x00078400 0x200>,     /* Rx */
<0x00078800 0x1f8>,     /* PCS */
<0x00078600 0x044>;     /* PCS misc */

which would translate to:
{.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 }

but was translated to:
{.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 }

So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018. Tested only on IPQ6018

Fixes 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/phy/qualcomm/phy-qcom-qmp-usb.c +9 -1
index 243cc2b9a0fb..05b4c0e67896 100644
@@ -1556,6 +1556,14 @@ static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
+static const struct qmp_usb_offsets qmp_usb_offsets_ipq8074 = {
+	.serdes		= 0,
+	.pcs		= 0x800,
+	.pcs_misc	= 0x600,
+	.tx		= 0x200,
+	.rx		= 0x400,
+};
+
 static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = {
 	.serdes		= 0,
 	.pcs		= 0x800,
@@ -1616,7 +1624,7 @@ static const struct qmp_usb_offsets qmp_usb_offsets_v7 = {
 static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.lanes			= 1,
 
-	.offsets		= &qmp_usb_offsets_v3,
+	.offsets		= &qmp_usb_offsets_ipq8074,
 
 	.serdes_tbl		= ipq8074_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
Signature · 1 line
2.7.4
Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Quoted 11 lines · Mantas Pucka

Commit 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration") introduced register offsets to the driver but for ipq8074/ipq6018 they do not match what was in the old style device tree. Example from old ipq6018.dtsi:

<0x00078200 0x130>,     /* Tx */
<0x00078400 0x200>,     /* Rx */
<0x00078800 0x1f8>,     /* PCS */
<0x00078600 0x044>;     /* PCS misc */
Quoted 5 lines

which would translate to:
{.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 }

but was translated to:
{.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 }

Even worse, it was translated to { ... .pcs = 0xc00, .pcs_misc = 0xa00 ... }

With this fixed:

Quoted 9 lines

So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018. Tested only on IPQ6018

Fixes 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
Signature · 2 lines
With best wishes
Dmitry
author
#3 lore raw

Re: [PATCH 1/2] phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Quoted 11 lines · Dmitry Baryshkov
Quoted 10 lines · Mantas Pucka

Commit 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration") introduced register offsets to the driver but for ipq8074/ipq6018 they do not match what was in the old style device tree. Example from old ipq6018.dtsi:

<0x00078200 0x130>,     /* Tx */
<0x00078400 0x200>,     /* Rx */
<0x00078800 0x1f8>,     /* PCS */
<0x00078600 0x044>;     /* PCS misc */
Quoted 6 lines
Quoted 5 lines

which would translate to:
{.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 }

but was translated to:
{.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 }

Even worse, it was translated to { ... .pcs = 0xc00, .pcs_misc = 0xa00 ... }

I was referring to qmp_usb_offsets_v3 here as ipq8074/ipq6018 did use them, not qmp_usb_offsets_v3_qcm2290.

Quoted 14 lines

With this fixed:

Quoted 8 lines

So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018. Tested only on IPQ6018

Fixes 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
---
  drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 10 +++++++++-
  1 file changed, 9 insertions(+), 1 deletion(-)
#4 lore raw

PATCH 2/2 phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018

In reply to Mantas Pucka

Commit 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018") noted that IPQ6018 init is identical to IPQ8074. Yet downstream uses separate serdes init sequence for IPQ6018. Since already existing IPQ9574 serdes init sequence is identical, just reuse it and fix failing USB3 mode in IPQ6018.

Fixes 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018")
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)
drivers/phy/qualcomm/phy-qcom-qmp-usb.c +19 -1
index 05b4c0e67896..6621246e4ddf 100644
@@ -1621,6 +1621,24 @@ static const struct qmp_usb_offsets qmp_usb_offsets_v7 = {
 	.rx		= 0x1000,
 };
 
+static const struct qmp_phy_cfg ipq6018_usb3phy_cfg = {
+	.lanes			= 1,
+
+	.offsets		= &qmp_usb_offsets_ipq8074,
+
+	.serdes_tbl		= ipq9574_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq9574_usb3_serdes_tbl),
+	.tx_tbl			= msm8996_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(msm8996_usb3_tx_tbl),
+	.rx_tbl			= ipq8074_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq8074_usb3_rx_tbl),
+	.pcs_tbl		= ipq8074_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.lanes			= 1,
 
@@ -2571,7 +2589,7 @@ static int qmp_usb_probe(struct platform_device *pdev)
 static const struct of_device_id qmp_usb_of_match_table[] = {
 	{
 		.compatible = "qcom,ipq6018-qmp-usb3-phy",
-		.data = &ipq8074_usb3phy_cfg,
+		.data = &ipq6018_usb3phy_cfg,
 	}, {
 		.compatible = "qcom,ipq8074-qmp-usb3-phy",
 		.data = &ipq8074_usb3phy_cfg,
Signature · 1 line
2.7.4
Reviewed-by on v1 2/2
#5 lore raw

Re: [PATCH 2/2] phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018

Quoted 7 lines · Mantas Pucka

Commit 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018") noted that IPQ6018 init is identical to IPQ8074. Yet downstream uses separate serdes init sequence for IPQ6018. Since already existing IPQ9574 serdes init sequence is identical, just reuse it and fix failing USB3 mode in IPQ6018.

Quoted 5 lines
Fixes 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018")
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)
Signature · 2 lines
With best wishes
Dmitry
maintainer Applied
#6 lore raw
In reply to Mantas Pucka
Quoted 8 lines · Mantas Pucka

Two issues were found in ipq8074/ipq6018 USB support. Sending as series, because fixes touch the same code.

Mantas Pucka (2):
phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018

[...]

Applied, thanks!

[1/2] phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

      commit: f74c35b630d40d414ca6b53f7b1b468dd4abf478
[2/2] phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
      commit: 62a5df451ab911421da96655fcc4d1e269ff6e2f

Best regards,

Signature · 1 line
~Vinod