arm64: dts: qcom: ipq6018: support thermal sensors
Subsystems (5)
cover arm64: dts: qcom: ipq6018: support thermal sensors
IPQ6018 have a thermal sensor HW that's compatible with existing qcom-tsens driver, so add dt-binding and enable it in devicei-tree.
Mantas Pucka (3):
dt-bindings: thermal: qcom-tsens: add IPQ6018 compatible
arm64: dts: qcom: ipq6018: add tsens node
arm64: dts: qcom: ipq6018: add thermal zones
.../devicetree/bindings/thermal/qcom-tsens.yaml | 1 + arch/arm64/boot/dts/qcom/ipq6018.dtsi | 131 +++++++++++++++++++++ 2 files changed, 132 insertions(+)
Signature · 1 line
2.7.4
PATCH 1/3 dt-bindings: thermal: qcom-tsens: add IPQ6018 compatible
IPQ6018 has tsens HW block compatible with IPQ8074.
--- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +1 -0
@@ -76,6 +76,7 @@ properties: - description: v2 of TSENS with combined interrupt items: - enum: + - qcom,ipq6018-tsens - qcom,ipq9574-tsens - const: qcom,ipq8074-tsens
Signature · 1 line
2.7.4
Re: [PATCH 1/3] dt-bindings: thermal: qcom-tsens: add IPQ6018 compatible
Quoted 3 lines · Mantas Pucka
IPQ6018 has tsens HW block compatible with IPQ8074.
Signed-off-by Mantas Pucka <[email protected]>
Cheers,
Conor.
Quoted 19 lines
--- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +1
-0@@ -76,6 +76,7 @@ properties: - description: v2 of TSENS with combined interrupt items: - enum: + - qcom,ipq6018-tsens - qcom,ipq9574-tsens - const: qcom,ipq8074-tsensSignature · 1 line
2.7.4
PATCH 2/3 arm64: dts: qcom: ipq6018: add tsens node
In reply to Mantas PuckaIPQ6018 has temperature sensing HW block compatible with IPQ8074. Add node for it.
--- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/qcom/ipq6018.dtsi +10 -0
@@ -330,6 +330,16 @@ clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq6018-tsens", "qcom,ipq8074-tsens"; + reg = <0x0 0x004a9000 0x0 0x1000>, + <0x0 0x004a8000 0x0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x00704000 0x0 0x20000>;
Signature · 1 line
2.7.4
PATCH 3/3 arm64: dts: qcom: ipq6018: add thermal zones
In reply to Mantas PuckaAdd thermal zones to make use of thermal sensors data. For CPU zone, add cooling device that uses CPU frequency scaling.
--- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 121 ++++++++++++++++++++++++++++++++++ 1 file changed, 121 insertions(+)
arch/arm64/boot/dts/qcom/ipq6018.dtsi +121 -0
@@ -9,6 +9,7 @@ #include <dt-bindings/clock/qcom,gcc-ipq6018.h> #include <dt-bindings/reset/qcom,gcc-ipq6018.h> #include <dt-bindings/clock/qcom,apss-ipq.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <2>;
@@ -43,6 +44,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU1: cpu@1 {
@@ -55,6 +57,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU2: cpu@2 {
@@ -67,6 +70,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; CPU3: cpu@3 {
@@ -79,6 +83,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; cpu-supply = <&ipq6018_s2>; + #cooling-cells = <2>; }; L2_0: l2-cache {
@@ -996,6 +1001,122 @@ }; }; + thermal-zones { + nss-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 4>; + + trips { + nss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 5>; + + trips { + nss-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wcss-phya0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 7>; + + trips { + wcss-phya0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wcss-phya1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 8>; + + trips { + wcss-phya1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 13>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu_alert: cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + lpass-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 14>; + + trips { + lpass-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddrss-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 15>; + + trips { + ddrss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
Signature · 1 line
2.7.4
Re: (subset) [PATCH 0/3] arm64: dts: qcom: ipq6018: support thermal sensors
In reply to Mantas PuckaQuoted 9 lines · Mantas Pucka
IPQ6018 have a thermal sensor HW that's compatible with existing qcom-tsens driver, so add dt-binding and enable it in devicei-tree.
Mantas Pucka (3):
dt-bindings: thermal: qcom-tsens: add IPQ6018 compatible
arm64: dts: qcom: ipq6018: add tsens node
arm64: dts: qcom: ipq6018: add thermal zones[...]
Applied, thanks!
[2/3] arm64: dts: qcom: ipq6018: add tsens node
commit: 0b17197055b528da22e9385200e61b847b499d48
[3/3] arm64: dts: qcom: ipq6018: add thermal zones
commit: 8f053e5616352943e16966f195f5a7a161e6fe7dBest regards,
Signature · 1 line
Bjorn Andersson <[email protected]>