ip/bond: add coupled_control support
Subsystems (2)
PATCH 1/1 ip/bond: add coupled_control support
coupled_control specifies whether the LACP state machine's MUX in the 802.3ad mode should have separate Collecting and Distributing states per IEEE 802.1AX-2008 5.4.15 for coupled and independent control state.
By default this setting is on and does not separate the Collecting and Distributing states, maintaining the bond in coupled control. If set off, will toggle independent control state machine which will seperate Collecting and Distributing states.
v2:
Dropped uapi header change
Use of print_on_off and parse_on_off
--- ip/iplink_bond.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
ip/iplink_bond.c +17 -1
@@ -148,6 +148,7 @@ static void print_explain(FILE *f)" [ tlb_dynamic_lb TLB_DYNAMIC_LB ]\n" " [ lacp_rate LACP_RATE ]\n" " [ lacp_active LACP_ACTIVE]\n" +" [ coupled_control COUPLED_CONTROL ]\n" " [ ad_select AD_SELECT ]\n" " [ ad_user_port_key PORTKEY ]\n" " [ ad_actor_sys_prio SYSPRIO ]\n"
@@ -163,6 +164,7 @@ static void print_explain(FILE *f)"LACP_ACTIVE := off|on\n" "LACP_RATE := slow|fast\n" "AD_SELECT := stable|bandwidth|count\n" +"COUPLED_CONTROL := off|on\n" ); }
@@ -176,13 +178,14 @@ static int bond_parse_opt(struct link_util *lu, int argc, char **argv, {__u8 mode, use_carrier, primary_reselect, fail_over_mac;__u8 xmit_hash_policy, num_peer_notif, all_slaves_active; -__u8 lacp_active, lacp_rate, ad_select, tlb_dynamic_lb; +__u8 lacp_active, lacp_rate, ad_select, tlb_dynamic_lb, coupled_control;__u16 ad_user_port_key, ad_actor_sys_prio;__u32 miimon, updelay, downdelay, peer_notify_delay, arp_interval, arp_validate;__u32 arp_all_targets, resend_igmp, min_links, lp_interval;__u32 packets_per_slave;__u8 missed_max;unsigned int ifindex; +int ret;while (argc >0 ) {if (matches (*argv,"mode" ) ==0 ) {
@@ -367,6 +370,12 @@ static int bond_parse_opt(struct link_util *lu, int argc, char **argv, lacp_active =get_index (lacp_active_tbl, *argv);addattr8 (n,1024 ,IFLA_BOND_AD_LACP_ACTIVE , lacp_active); + }else if (strcmp (*argv,"coupled_control" ) ==0 ) { +NEXT_ARG (); + coupled_control =parse_on_off ("coupled_control" , *argv, &ret); +if (ret) +return ret; +addattr8 (n,1024 ,IFLA_BOND_COUPLED_CONTROL , coupled_control); }else if (matches (*argv,"ad_select" ) ==0 ) {NEXT_ARG ();if (get_index (ad_select_tbl, *argv) <0 )
@@ -659,6 +668,13 @@ static void bond_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[]) lacp_rate); } +if (tb[IFLA_BOND_COUPLED_CONTROL ]) { +print_on_off (PRINT_ANY , +"coupled_control" , +"coupled_control %s " , +rta_getattr_u8 (tb[IFLA_BOND_COUPLED_CONTROL ])); + } +if (tb[IFLA_BOND_AD_SELECT ]) {const char *ad_select =get_name (ad_select_tbl,rta_getattr_u8 (tb[IFLA_BOND_AD_SELECT ]));
Signature · 1 line
2.43.0.429.g432eaa2c6b-goog
This patch was applied to iproute2/iproute2-next.git (main) by David Ahern <[email protected]>:
Hello:
This patch was applied to iproute2/iproute2-next.git (main) by David Ahern <[email protected]>:
Quoted 10 lines · On Thu, 25 Jan 2024 23:11:47 +0000 you wrote:
coupled_controlspecifies whether the LACP state machine's MUX in the 802.3ad mode should have separate Collecting and Distributing states per IEEE 802.1AX-2008 5.4.15 for coupled and independent control state.By default this setting is on and does not separate the Collecting and Distributing states, maintaining the bond in coupled control. If set off, will toggle independent control state machine which will seperate Collecting and Distributing states.
[...]
Here is the summary with links:
- [iproute2-next] ip/bond: add coupled_control support
https://git.kernel.org/pub/scm/network/iproute2/iproute2-next.git/commit/?id=e8dcb1214a21
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html