Skip to contentSkip to conversation

arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator

PATCH In review Johan Jonker 2 participants 4 messages Mar 12, 2020 – Mar 17, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator

An expermental test with the command below gives this error:

arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dt.yaml:
spdif@ff870000:
'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'

'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns' are not valid properties for 'spdif' nodes, so remove them.

make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

---
 arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts | 2 --
 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +0 -2
index b4d8f60b7..73e269a8a 100644
@@ -230,7 +230,5 @@
 };
 
 &spdif {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
 	status = "okay";
 };
Signature · 1 line
2.11.0
#1 lore raw

PATCH 2/2 ARM: dts: rockchip: swap clocks and clock-names values for spdif nodes

Current dts files with 'spdif' nodes are manually verified. In order to automate this process rockchip-spdif.txt has to be converted to yaml. In the new setup dtbs_check with rockchip-spdif.yaml expect clocks and clock-names values in the same order. Fix this for some older Rockchip models.

make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

---
 arch/arm/boot/dts/rk3188.dtsi | 4 ++--
 arch/arm/boot/dts/rk3288.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/rk3188.dtsi +2 -2
index 24abf214a..2298a8d84 100644
@@ -182,8 +182,8 @@
 		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
 		reg = <0x1011e000 0x2000>;
 		#sound-dai-cells = <0>;
-		clock-names = "hclk", "mclk";
-		clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
 		dmas = <&dmac1_s 8>;
 		dma-names = "tx";
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/rk3288.dtsi +2 -2
index 485234f6a..07681f1f0 100644
@@ -944,8 +944,8 @@
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
-		clock-names = "hclk", "mclk";
-		clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+		clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
+		clock-names = "mclk", "hclk";
 		dmas = <&dmac_bus_s 3>;
 		dma-names = "tx";
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.11.0
maintainer
#2 lore raw

Re: [PATCH 2/2] ARM: dts: rockchip: swap clocks and clock-names values for spdif nodes

Am Donnerstag, 12. März 2020, 18:22:40 CET schrieb Johan Jonker:

Quoted 10 lines

Current dts files with 'spdif' nodes are manually verified. In order to automate this process rockchip-spdif.txt has to be converted to yaml. In the new setup dtbs_check with rockchip-spdif.yaml expect clocks and clock-names values in the same order. Fix this for some older Rockchip models.

make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

applied for 5.7

Thanks
Heiko

maintainer
#3 lore raw
In reply to Johan Jonker

Am Donnerstag, 12. März 2020, 18:22:39 CET schrieb Johan Jonker:

Quoted 7 lines

An expermental test with the command below gives this error:

arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dt.yaml:
spdif@ff870000:
'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'

Quoted 7 lines

'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns' are not valid properties for 'spdif' nodes, so remove them.

make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

applied for 5.7

Thanks
Heiko